Methylene blue adsorption on magnetic alginate/rice husk bio-composite.

Magnetic alginate/rice husk (m-ALG/RH) bio-composite beads prepared with ionotropic gelation method and used for methylene blue (MB) removal. Structural analysis of magnetic alginate/rice husk composite beads was performed using FTIR, SEM-EDS and TGA techniques. The accomplishment of magnetic alginate/rice husk composite beads as an adsorbent for the removal methylene blue was investigated from aqueous solution. Maximum experimental adsorption capacity of the bio-composite beads was calculated as 274.9 mg/g. The various process parameters such as pH, temperature and initial MB concentration optimized. It was determined that pH no significant effect on dye removal efficiency of beads while temperature and ionic strength caused a decrease on removal efficiency. The various isotherm models were applied for determine the adsorption mechanism and Freundlich isotherm model is more compatible with the experimental data. The kinetic studies showed that the adsorption of methylene blue can be well described by the fractal Brouers-Sotolongo kinetic model. The thermodynamic calculations indicated that methylene blue adsorption was a spontaneous and exothermic nature. The results showed that the magnetic alginate/rice husk bio-composite as low-cost and eco-friendly adsorbent can be effectively used for cationic dye removal steps in the environmental engineering applications.