Literature DB >> 32110801

Biomechanical Relationships Between Manual Wheelchair Steering and the Position of the Human Body's Center of Gravity.

B Wieczorek1, M Kukla1.   

Abstract

The purpose of this investigation was to analyze the impact of differential steering of a wheelchair with a pushrim on changes in the position of the body's center of gravity. The method assumed measuring the wheelchair trajectory and the body's center of gravity and determining the transverse relocation of the measured body's center of gravity in relation to a point on the wheelchair trajectory. Twenty-seven measurement tests which demonstrated various wheelchair trajectories were carried out within the investigation. The trajectories were 10 to 15 m long and involved moving forward (test 2), reversing (test 3), turning left (test 1) and right (test 4). The factor of deviation of the center of gravity of human body from the wheelchair trajectory was determined for selected characteristic turning maneuvers. The measured values ranged from 51 to 192 mm. The impact of the wheelchair trajectory on the position of the body's center of gravity was demonstrated as a result of this investigation. Consequently, a trajectory deviation factor for relocation of the human body weight on one side of the wheelchair has been demonstrated.
Copyright © 2020 by ASME.

Entities:  

Mesh:

Year:  2020        PMID: 32110801     DOI: 10.1115/1.4046501

Source DB:  PubMed          Journal:  J Biomech Eng        ISSN: 0148-0731            Impact factor:   2.097


  3 in total

1.  Manual wheelchair biomechanics while overcoming various environmental barriers: A systematic review.

Authors:  Théo Rouvier; Aude Louessard; Emeline Simonetti; Samuel Hybois; Joseph Bascou; Charles Pontonnier; Hélène Pillet; Christophe Sauret
Journal:  PLoS One       Date:  2022-06-23       Impact factor: 3.752

2.  Influence of Wheelchair Type on Kinematic Parameters in Wheelchair Rugby.

Authors:  Sadate Bakatchina; Thierry Weissland; Florian Brassart; Ilona Alberca; Opale Vigie; Didier Pradon; Arnaud Faupin
Journal:  Front Sports Act Living       Date:  2022-06-03

3.  Geometric Specification of Non-Circular Pulleys Made with Various Additive Manufacturing Techniques.

Authors:  Piotr Krawiec; Dorota Czarnecka-Komorowska; Łukasz Warguła; Szymon Wojciechowski
Journal:  Materials (Basel)       Date:  2021-03-29       Impact factor: 3.623

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.