Sohaib Shujaat1, Eman Shaheen2, Felipe Novillo3, Constantinus Politis4, Reinhilde Jacobs4. 1. Doctoral candidate, OMFS-IMPATH Research Group, Department of Imaging & Pathology, Faculty of Medicine, KU Leuven & Oral and Maxillofacial Surgery, University Hospitals Leuven, Leuven, Belgium. Electronic address: sohaib.shujaat@kuleuven.be. 2. Clinical Engineer, OMFS-IMPATH Research Group, Department of Imaging & Pathology, Faculty of Medicine, KU Leuven & Oral and Maxillofacial Surgery, University Hospitals Leuven, Leuven, Belgium. 3. Biomedical Engineer, OMFS-IMPATH Research Group, Department of Imaging & Pathology, Faculty of Medicine, KU Leuven & Oral and Maxillofacial Surgery, University Hospitals Leuven, Leuven, Belgium. 4. Professor, OMFS-IMPATH Research Group, Department of Imaging & Pathology, Faculty of Medicine, KU Leuven & Oral and Maxillofacial Surgery, University Hospitals Leuven, Leuven, Belgium.
Abstract
STATEMENT OF PROBLEM: The accuracy of the external surface and internal trabecular architecture of large cone beam computed tomography (CBCT)-derived dentomaxillofacial anatomic casts has not yet been thoroughly investigated. PURPOSE: The purpose of this comparative study was to evaluate the quantitative accuracy of CBCT-derived mandibular casts by applying an innovative land-mark free methodology. MATERIAL AND METHODS: Following inclusion and exclusion criteria, a CBCT scan of an 18-year-old woman was acquired. The mandible was segmented and isolated from the data set. The segmented mandible included depiction of the cortical surface, trabecular architecture, erupted teeth, and impacted third molars with incomplete root formation. Fifteen mandibular casts were fabricated by using multijet (MJ=4), digital light processing (DLP=4), stereolithography (SLA=2), fused deposition modeling (FDM=2), colorjet (CJ=2), and selective laser sintering (LS=1)-based high-quality medical commercial and office printers. Each printed cast was scanned and superimposed onto the original mandible, and the accuracy of the complete mandible and individual surfaces were assessed with a color-coded map. RESULTS: When the overall combined error associated with complete casts based on printing technology were compared, MJ showed the highest accuracy (0.6 ±0.7 mm). FDM technology (2.2 ±3.4 mm) had the highest overall absolute mean difference. No significant difference was observed when both individual surfaces and the complete mandible were compared. CONCLUSIONS: Overall, casts replicated the skeletal and dental anatomic surfaces well. However, shortcomings were observed in relation to depicting trabecular architecture.
STATEMENT OF PROBLEM: The accuracy of the external surface and internal trabecular architecture of large cone beam computed tomography (CBCT)-derived dentomaxillofacial anatomic casts has not yet been thoroughly investigated. PURPOSE: The purpose of this comparative study was to evaluate the quantitative accuracy of CBCT-derived mandibular casts by applying an innovative land-mark free methodology. MATERIAL AND METHODS: Following inclusion and exclusion criteria, a CBCT scan of an 18-year-old woman was acquired. The mandible was segmented and isolated from the data set. The segmented mandible included depiction of the cortical surface, trabecular architecture, erupted teeth, and impacted third molars with incomplete root formation. Fifteen mandibular casts were fabricated by using multijet (MJ=4), digital light processing (DLP=4), stereolithography (SLA=2), fused deposition modeling (FDM=2), colorjet (CJ=2), and selective laser sintering (LS=1)-based high-quality medical commercial and office printers. Each printed cast was scanned and superimposed onto the original mandible, and the accuracy of the complete mandible and individual surfaces were assessed with a color-coded map. RESULTS: When the overall combined error associated with complete casts based on printing technology were compared, MJ showed the highest accuracy (0.6 ±0.7 mm). FDM technology (2.2 ±3.4 mm) had the highest overall absolute mean difference. No significant difference was observed when both individual surfaces and the complete mandible were compared. CONCLUSIONS: Overall, casts replicated the skeletal and dental anatomic surfaces well. However, shortcomings were observed in relation to depicting trabecular architecture.
Authors: Stefaan Van Hoe; Eman Shaheen; Karla de Faria Vasconcelos; Joseph Schoenaers; Constantinus Politis; Reinhilde Jacobs Journal: BJR Case Rep Date: 2021-01-08