The Application of Submerged Modules for Membrane Distillation.

This paper deals with the efficiency of capillary modules without an external housing, which were used as submerged modules in the membrane distillation process. The commercial hydrophobic capillary membranes fabricated for the microfiltration process were applied. Several constructional variants of submerged modules were discussed. The influence of membrane arrangement, packing density, capillary diameter and length on the module performance was determined. The effect of process conditions, i.e., velocity and temperature of the streams, on the permeate flux was also evaluated. The submerged modules were located in the feed tank or in the distillate tank. It was found that much higher values of the permeate flux were obtained when the membranes were immersed in the feed with the distillate flowing inside the capillary membranes. The efficiency of submerged modules was additionally compared with the conventional membrane distillation (MD) capillary modules and a similar performance of both constructions was achieved.