Literature DB >> 31979051

Comparison of the Effects of Different Food-Grade Emulsifiers on the Properties and Stability of a Casein-Maltodextrin-Soybean Oil Compound Emulsion.

Yuan Liu1,2, Zhen-Cheng Wei1, Yuan-Yuan Deng1, Hao Dong3, Yan Zhang1, Xiao-Jun Tang1, Ping Li1, Guang Liu1, Ming-Wei Zhang1.   

Abstract

The improvement of food-grade emulsifiers in the properties and stability of complex emulsion has attracted much interest. In this study, the effects of six food-grade emulsifiers with a hydrophilic-lipophilic balance (HLB) range of 3.4-8.0 on a casein-maltodextrin-soybean oil compound emulsion were investigated by centrifugal precipitation rate (CPR), emulsifying activity index (EAI), microrheological properties, zeta potential, average particle size, and Turbiscan stability index (TSI). The optimal amounts of added succinylated monoglyceride (SMG) and polyglycerol fatty acid ester were 0.0025% and 0.1% (w/w), respectively, while that of the other four emulsifiers was 0.2% (w/w), according to the CPR. Thereinto, the SMG-stabilized emulsion exhibited the highest emulsifying activity and the lowest viscosity value and possessed the highest stability over 14 days of storage, which was indicated by the lowest TSI value and the smallest change in delta backscattering signal, relative to those of the other groups. Moreover, the emulsion stabilized by SMG displayed better emulsion stability than the control under a range of pH (6.0-8.0) and calcium ion concentrations (0-10 mM), which was attributed to the increased zeta potential value and the decreased average particle size of droplets with the addition of SMG. The present study provides a basic understanding for SMG improving the properties and stability of the complex emulsion.

Entities:  

Keywords:  compound emulsion; emulsion properties; emulsion stability; food-grade emulsifiers; succinylated monoglyceride

Year:  2020        PMID: 31979051      PMCID: PMC7036911          DOI: 10.3390/molecules25030458

Source DB:  PubMed          Journal:  Molecules        ISSN: 1420-3049            Impact factor:   4.411


  11 in total

1.  O/W emulsions stabilised by both low molecular weight surfactants and colloidal particles: The effect of surfactant type and concentration.

Authors:  R Pichot; F Spyropoulos; I T Norton
Journal:  J Colloid Interface Sci       Date:  2010-08-10       Impact factor: 8.128

2.  Electrical charging of a conducting water droplet in a dielectric fluid on the electrode surface.

Authors:  Yong-Mi Jung; Hyun-Chang Oh; In Seok Kang
Journal:  J Colloid Interface Sci       Date:  2008-04-11       Impact factor: 8.128

3.  Competitive displacement of sodium caseinate by low-molecular-weight emulsifiers and the effects on emulsion texture and rheology.

Authors:  M B Munk; F H Larsen; F W J van den Berg; J C Knudsen; M L Andersen
Journal:  Langmuir       Date:  2014-07-15       Impact factor: 3.882

4.  Characterization of physicochemical properties of casein mixture preparation extracted from organic milk for use as an emulsifier in organic processed foods.

Authors:  Yeon-Kyeong Byun; Se-Hee Hwang; Jin-Hee Lee
Journal:  J Sci Food Agric       Date:  2018-12-07       Impact factor: 3.638

5.  Physicochemical stability, microrheological properties and microstructure of lutein emulsions stabilized by multilayer membranes consisting of whey protein isolate, flaxseed gum and chitosan.

Authors:  Duoxia Xu; Zulipiya Aihemaiti; Yanping Cao; Chao Teng; Xiuting Li
Journal:  Food Chem       Date:  2016-01-13       Impact factor: 7.514

6.  Creaming and oxidative stability of fish oil-in-water emulsions stabilized by whey protein-xanthan-locust bean complexes: Impact of pH.

Authors:  Cory Owens; Kristen Griffin; Hanna Khouryieh; Kevin Williams
Journal:  Food Chem       Date:  2017-06-23       Impact factor: 7.514

7.  Assessing Physical Stability of Colloidal Dispersions Using a Turbiscan Optical Analyzer.

Authors:  Yan Sun; Alexandru Deac; Geoff G Z Zhang
Journal:  Mol Pharm       Date:  2019-01-22       Impact factor: 4.939

8.  Stability and rheology of emulsions containing sodium caseinate: combined effects of ionic calcium and alcohol.

Authors:  Stewart J Radford; Eric Dickinson; Matt Golding
Journal:  J Colloid Interface Sci       Date:  2004-06-15       Impact factor: 8.128

9.  Stability of curcumin in oil-in-water emulsions: Impact of emulsifier type and concentration on chemical degradation.

Authors:  Mahesh Kharat; Guodong Zhang; David Julian McClements
Journal:  Food Res Int       Date:  2018-05-16       Impact factor: 6.475

Review 10.  Techniques and methods to study functional characteristics of emulsion systems.

Authors:  Yin-Ting Hu; Yuwen Ting; Jing-Yu Hu; Shu-Chen Hsieh
Journal:  J Food Drug Anal       Date:  2016-12-08       Impact factor: 6.157

View more
  2 in total

1.  Improved Oxidation Stability of Camellia Oil-in-Water Emulsions Stabilized by the Mixed Monolayer of Soy Protein Isolate/Bamboo Shoot Protein Complexes.

Authors:  Yuhang Xi; Aiping Zhang; Zhongjiang Wang; Shahzad Farooq; Cen Zhang; Liangru Wu; Hui Zhang
Journal:  Front Nutr       Date:  2021-12-01

2.  Preparation of Fucoxanthin Nanoemulsion Stabilized by Natural Emulsifiers: Fucoidan, Sodium Caseinate, and Gum Arabic.

Authors:  Najmeh Oliyaei; Marzieh Moosavi-Nasab; Nader Tanideh
Journal:  Molecules       Date:  2022-10-09       Impact factor: 4.927

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.