| Literature DB >> 31950663 |
Xiaoru Ren1, Long Yuan1, Qingshuang Liang2, Renguo Xie1, Zhibin Geng1, Yu Sun1, Lei Wang3, Keke Huang1, Tianli Wu4, Shouhua Feng1.
Abstract
High Bi-ratio ternary sulfides have been recently reported as superior thermoelectric materials. However, the synthesis of high Bi-ratio Cu-Bi-S nanocrystal remains a challenge. Reported here are the synthesis and characterization of three-phase Cu-Bi-S nanocrystals with the nominal chemical formulae of Cu1.57 Bi4.57 S8 , Cu2.93 Bi4.89 S9 and Cu3 BiS3 . The samples were prepared using a Bi2 S3 precursor by varying the amount and type of Cu2-x S (i. e. Cu2 S or Cu7.2 S4 ) reactants. TEM images reveal that two new samples crystalized having nanorod morphology with radii of approximately 50 nm and lengths of 200 nm. XPS results indicate that the valence states of Bi in both the two new phases are +3 with viable oxidation states for Cu. UV-Vis-NIR absorption spectroscopy reveals that narrow direct bandgaps are 1.12 and 1.27 eV for Cu1.57 Bi4.57 S8 and Cu2.93 Bi4.89 S9 , respectively. Besides, this method could also be applied to synthesize the Cu3 BiS3 phase with a new nanoplate morphology. The as-synthesized Cu-Bi-S samples show Cu/Bi ratio-dependent photoresponsive properties. This study not only reports the structure and bandgap of two ternary sulfides, which have only been discovered in the mineral previously, but also provides an efficient method for synthesizing Bi-rich ternary chalcogenide nanocrystals.Entities:
Keywords: Bismuth; hot injection method; metal-sulfide precursors; nanocrystals
Year: 2018 PMID: 31950663 DOI: 10.1002/cplu.201800271
Source DB: PubMed Journal: Chempluschem ISSN: 2192-6506 Impact factor: 2.863