Literature DB >> 31785897

Rapid and efficient removal of acetochlor from environmental water using Cr-MIL-101 sorbent modified with 3, 5-Bis(trifluoromethyl)phenyl isocyanate.

Biao Wang1, Yong Yang1, Yu Lu1, Wei Wang2, Qiangwei Wang1, Xiaowu Dong3, Jinhao Zhao4.   

Abstract

The excessive use of acetochlor (ACT), a commonly used herbicide with latent endocrine disrupting functions, causes surface water pollution. The efficient removal of ACT from contaminated water supplies is of paramount importance. In the current work, 3,5-Bis(trifluoromethyl)phenyl isocyanate (BTP) was successfully anchored onto Cr-MIL-101 walls via covalent incorporation to afford Cr-MIL-101-BTP as a novel adsorbent for the high-efficiency removal of ACT in aqueous solutions. The kinetic adsorption process, adsorption isotherms, adsorbent regeneration, and key parameters, such as adsorbent dosage, pH value, and ionic strength, for the adsorption of ACT were studied. Results showed that a pseudo-second-order rate equation effectively describes the adsorption kinetics. The Langmuir model exhibited a better fit to adsorption isotherm than the Freundlich model. Given the π-π stacking and hydrogen bond interaction, the adsorption capacity in Cr-MIL-101-BTP approached a maximum of 312.5 mg/g for ACT, which was considerably higher than the adsorption capacities of many other reported adsorbents. The excellent adsorption characteristics of Cr-MIL-101-BTP toward ACT were preserved in a wide pH range and high concentration of background electrolytes. In addition, the result showed that partition coefficient (PC) of Cr-MIL-101-BTP was 356.14 mg/g/μM at 5 mg/L of ACT concentration, which was found as the outperformer in all tested subjects. The ACT adsorption capacity of Cr-MIL-101-BTP at the breakthrough point was greatly influenced by initial concentration, and could be described by the Thomas model. Regeneration experiments indicated that the Cr-MIL-101-BTP was recycled at least six times without significant loss of adsorption capacity. Moreover, Cr-MIL-101-BTP did not show cytotoxic activity against the tested HepG2 cell lines and did not pose serious risks to Daphnia carinata survival (48 h LC50 = 446.6 μg/mL). These results prefigured the promising potential of Cr-MIL-101-BTP as a novel adsorbent for the efficient removal of ACT from aqueous solutions.
Copyright © 2019 Elsevier B.V. All rights reserved.

Entities:  

Keywords:  3,5-Bis(trifluoromethyl)phenyl isocyanate (BTP); Acetochlor; Batch adsorption; Cr-MIL-101; Fixed-bed adsorption

Mesh:

Substances:

Year:  2019        PMID: 31785897     DOI: 10.1016/j.scitotenv.2019.135512

Source DB:  PubMed          Journal:  Sci Total Environ        ISSN: 0048-9697            Impact factor:   7.963


  2 in total

Review 1.  A Critical Review on Metal-Organic Frameworks and Their Composites as Advanced Materials for Adsorption and Photocatalytic Degradation of Emerging Organic Pollutants from Wastewater.

Authors:  Zakariyya Uba Zango; Khairulazhar Jumbri; Nonni Soraya Sambudi; Anita Ramli; Noor Hana Hanif Abu Bakar; Bahruddin Saad; Muhammad Nur' Hafiz Rozaini; Hamza Ahmad Isiyaka; Ahmad Hussaini Jagaba; Osamah Aldaghri; Abdelmoneim Sulieman
Journal:  Polymers (Basel)       Date:  2020-11-10       Impact factor: 4.329

2.  A Robust PVDF-Assisted Composite Membrane for Tetracycline Degradation in Emulsion and Oil-Water Separation.

Authors:  Huijun Li; Xin Xu; Jiwei Wang; Xuefeng Han; Zhouqing Xu
Journal:  Nanomaterials (Basel)       Date:  2021-11-26       Impact factor: 5.076

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.