Highly Stretchable Conductor by Self-Assembling and Mechanical Sintering of a 2D Liquid Metal on a 3D Polydopamine-Modified Polyurethane Sponge.

A highly stretchable conductor was fabricated through dip-coating a new liquid metal (LM) electric ink on a polydopamine (PDA)-modified three-dimensional (3D) polyurethane sponge (PUS) followed by mechanical sintering. The LM was first sonicated to nanodroplets to reduce the consumption of LM and then modified by 3-mercaptopropionic acid (LMNPS-MPA) to improve the interfacial adhesion between LM and PUS. The denser and even distribution of LMNPS-MPA self-assembling on PDA-treated PUS (PUS-PDA) was successfully prepared via hydrogen bonding interactions. Mechanical sintering of 3D PUS-PDA coated by a two-dimensional (2D) LM layer was then conducted to obtain a continuous conductive network. Comparing with those of the reported 3D conductors, the resulting PUS-PDA-LM composite conductor shows both high electrical conductivity (478 S cm-1) under a low LM consumption of 10 vol% and excellent conductivity stability with the relative resistance change, ΔR/R0, of 2% at 50% strain under stretching deformation. The as-prepared PUS-PDA-LM composites were then successfully applied as flexible and stretchable light-emitting diode (LED) arrays with excellent conductivity and conductivity stability at different deformations. We believe that the 3D stretchable PUS-PDA-LM conductor has many potential applications in flexible sensors, flexible circuits, rollable displays, etc.