Literature DB >> 31735219

Glassy carbon electrodes modified with reduced graphene oxide-MoS2-poly (3, 4-ethylene dioxythiophene) nanocomposites for the non-enzymatic detection of nitrite in water and milk.

Rajesh Madhuvilakku1, Srinivasan Alagar1, Ramalakshmi Mariappan1, Shakkthivel Piraman2.   

Abstract

The detrimental effect of (NO2-) on environment, a sensitive and selective detection of nitrite (NO2-) ions with point-to-care device is need to be fabricated. Herein, we report the non-enzymatic nitrite sensor using a novel reduced graphene oxide/molybdenum disulfide/poly (3, 4-ethylene dioxythiophene) (rGO/MoS2/PEDOT) nanocomposite electrode. The rGO/MoS2/PEDOT nanocomposite was synthesized using facile and cost-effective hydrothermal and polymerization approaches. The characteristics of rGO-MoS2-PEDOT nanocomposite was investigated by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), Raman, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET) analyses. The rGO-MoS2-PEDOT nanocomposite modified glassy carbon electrode (GCE) was directly used for electrocatalytic detection of nitrite ions present in the solution. TEM images show the PEDOT nanoparticles with an average size of 100-120 nm are uniformly covered on the outer face of rGO-MoS2 nanosheets. The interaction between the PEDOT and rGO-MoS2 is evidenced in the FTIR, XRD and XPS studies, and they produced synergistic effect, resulting enhanced electrocatalytic performance activity towards oxidation of nitrite. Under optimized conditions, the fabricated electrode exhibited remarkably good sensitivity (874.19 μA μM-1 cm-2), low detection limit (LOD) (0.059 μM, S/N = 3), wide linear range (0.001-1 mM) of nitrite with desirable selectivity, long-term stability and reproducibility. Furthermore, the practical feasibility of the fabricated sensor is validated by the successful detection of nitrite ion in some water and milk samples with excellent correlation. Thus, feasible easier synthesis method was adopted first time to fabricate rGO-MoS2-PEDOT nanocomposite nitrite sensor in the milk and water samples with enhanced selectivity, sensitivity and LOD.
Copyright © 2019 Elsevier B.V. All rights reserved.

Entities:  

Keywords:  Electrochemical sensors; Molybdenum disulfide; Nanocomposite; Nitrite; Poly (3, 4-ethylene dioxythiophene); Reduced graphene oxide

Mesh:

Substances:

Year:  2019        PMID: 31735219     DOI: 10.1016/j.aca.2019.09.043

Source DB:  PubMed          Journal:  Anal Chim Acta        ISSN: 0003-2670            Impact factor:   6.558


  2 in total

1.  Recent Developments in Polymer Nanocomposite-Based Electrochemical Sensors for Detecting Environmental Pollutants.

Authors:  Somayeh Tajik; Hadi Beitollahi; Fariba Garkani Nejad; Zahra Dourandish; Mohammad A Khalilzadeh; Ho Won Jang; Richard A Venditti; Rajender S Varma; Mohammadreza Shokouhimehr
Journal:  Ind Eng Chem Res       Date:  2021       Impact factor: 3.720

2.  Electrochemical synthesis of multilayered PEDOT/PEDOT-SH/Au nanocomposites for electrochemical sensing of nitrite.

Authors:  Yi Ge; Ruxangul Jamal; Ruanye Zhang; Wenli Zhang; Zongna Yu; Yinqiang Yan; Yingcheng Liu; Tursun Abdiryim
Journal:  Mikrochim Acta       Date:  2020-03-26       Impact factor: 5.833

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.