Utility of Films to Anticipate Effect of Drug Load and Polymer on Dissolution Performance from Tablets of Amorphous Itraconazole Spray-Dried Dispersions.

Because spray-dried dispersion (SDD) performance depends on polymer selection and drug load, time- and resource-sparing methods to screen drug/polymer combinations before spray drying are desirable. The primary objective was to assess the utility of films to anticipate the effects of drug load and polymer grade on dissolution performance of tablets containing SDDs of itraconazole (ITZ). A secondary objective was to characterize the solid-state attributes of films and SDDs to explain drug load and polymer effects on dissolution performance. SDDs employed three different grades of hypromellose acetate succinate (i.e., either HPMCAS-L, HPMCAS-M, or HPMCAS-H). Solid-state characterization employed differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and solid-state nuclear magnetic resonance (ssNMR) spectroscopy. Results indicate that films correctly anticipated the effects of drug load and polymer on dissolution performance. The best dissolution profiles were observed under the following conditions: 20% drug loading performed better than 30% for both films and SDDs, and the polymer grade rank order was HPMCAS-L > HPMCAS-M > HPMCAS-H for both films and SDDs. No dissolution was detected from films or SDDs containing HPMCAS-H. Solid-state characterization revealed percent crystallinity and phase miscibility as contributing factors to dissolution, but were not the sole factors. Amorphous content in films varied with drug load (10% > 20% > 30%) and polymer grades (HPMCAS-L > HPMCAS-M > HPMCAS-H), in agreement with dissolution. In conclusion, films anticipated the rank-order effects of drug load and polymer grade on dissolution performance from SDDs of ITZ, in part through percent crystallinity and phase miscibility influences.