Anna Rebeca Bls Palmeira 1 , Waldemir F Vieira-Junior 1 , Flávia Lb Amaral 1 , Roberta T Basting 1 , Cecélia P Turssi 1 , Fabiana Mg França 1 Show Affiliations »
Abstract
PURPOSE: To evaluate the influence of ceramic laminate on color stability, surface microhardness, water sorption, and solubility of resin luting agents. METHODS: Disk-shaped specimens (10 × 2 mm) of dual-cured resin cements (RelyX ARC or RelyX Ultimate) were obtained, and a light-cured luting agent (RelyX Veneer) was used. In Experiment 1, disk-shaped resin cements (n = 10) were submitted to: I) polymerization with or without ceramic laminate (0.7 mm), and II) immersion in distilled water or coffee, 3 hours daily for 20 days. The surface microhardness loss (%SML) was determined, and the color variables were assessed by the CIE L*a*b* system (ΔE, ΔL*) and the shade guide units (ΔSGU). In Experiment 2, other disk-shaped specimens (n = 5) were submitted to polymerization with or without ceramic laminate to assess their water sorption (WS) and solubility (S). Statistical analysis was performed using 3-way ANOVA and Tukey's test for ΔE, ΔL* and %SML; Mann-Whitney, Kruskal-Wallis, and Dunn's tests for ΔSGU; and 2-way ANOVA and Tukey's test for WS and S. The significance level was set at 5%. RESULTS: No statistically significant differences among the resin cements was observed for %SML, WS, or S, regardless of stain exposure or presence of ceramic laminate during light activation. Coffee caused a significant decrease in ΔL* values. All the resin cements presented visually detectable color alteration for ΔE; however, RelyX Ultimate showed less color change after coffee exposure. RelyX ARC showed the greatest color change in water. RelyX Veneer presented the highest values of ΔSGU, compared with the other resin cements. The WS, S, and %SML of resin cements were not influenced by the staining solution or the presence of ceramic laminate during light activation; however, RelyX Ultimate resin cement presented the best color stability. CLINICAL SIGNIFICANCE: Resin cements can present color changes over time, affecting the long-term esthetic success of laminate ceramic restorations. RelyX Ultimate resin cement presented the best color stability, thus making it a suitable indication for cementing ceramic laminates. Copyright©American Journal of Dentistry.
PURPOSE: To evaluate the influence of ceramic laminate on color stability, surface microhardness, water sorption, and solubility of resin luting agents. METHODS: Disk-shaped specimens (10 × 2 mm) of dual-cured resin cements (RelyX ARC or RelyX Ultimate) were obtained, and a light-cured luting agent (RelyX Veneer) was used. In Experiment 1, disk-shaped resin cements (n = 10) were submitted to: I) polymerization with or without ceramic laminate (0.7 mm), and II) immersion in distilled water or coffee, 3 hours daily for 20 days. The surface microhardness loss (%SML) was determined, and the color variables were assessed by the CIE L*a*b* system (ΔE, ΔL*) and the shade guide units (ΔSGU). In Experiment 2, other disk-shaped specimens (n = 5) were submitted to polymerization with or without ceramic laminate to assess their water sorption (WS) and solubility (S). Statistical analysis was performed using 3-way ANOVA and Tukey's test for ΔE, ΔL* and %SML; Mann-Whitney, Kruskal-Wallis, and Dunn's tests for ΔSGU; and 2-way ANOVA and Tukey's test for WS and S. The significance level was set at 5%. RESULTS: No statistically significant differences among the resin cements was observed for %SML, WS, or S, regardless of stain exposure or presence of ceramic laminate during light activation. Coffee caused a significant decrease in ΔL* values. All the resin cements presented visually detectable color alteration for ΔE; however, RelyX Ultimate showed less color change after coffee exposure. RelyX ARC showed the greatest color change in water. RelyX Veneer presented the highest values of ΔSGU, compared with the other resin cements. The WS, S, and %SML of resin cements were not influenced by the staining solution or the presence of ceramic laminate during light activation; however, RelyX Ultimate resin cement presented the best color stability. CLINICAL SIGNIFICANCE: Resin cements can present color changes over time, affecting the long-term esthetic success of laminate ceramic restorations. RelyX Ultimate resin cement presented the best color stability, thus making it a suitable indication for cementing ceramic laminates. Copyright©American Journal of Dentistry.
Entities: Disease
Mesh： See more »
Substances： See more »
Year: 2019
PMID： 31675190
Source DB: PubMed Journal: Am J Dent ISSN： 0894-8275 Impact factor: 1.522