Bioparticles of flaxseed protein and mucilage enhance the physical and oxidative stability of flaxseed oil emulsions as a potential natural alternative for synthetic surfactants.

Flaxseed protein (FP) and mucilage (FM) complex bioparticles as sustainable ingredients were assembled by electrostatic interaction for plant-based Pickering stabilization of flaxseed oil (FO)-in-water emulsions. The effect of FO content (1-5 wt%) on droplet size and accelerated creaming stability of the emulsions was evaluated, from which it was found that 2.5 wt% FO emulsion had the smallest initial droplet size (i.e. D[4,3] = 8 μm) and creaming velocity (2.9 μm/s). The microstructure of the emulsions was observed using Cryo-SEM, confocal and optical microscopy, showing a thick layer of the particles on the oil surface responsible for the stabilization. The physical stability of FO emulsions stabilized by complex bioparticles against various environmental stress conditions (pH, salt and temperature) was higher compared to plain FP- and polysorbate 80-stabilized emulsions. Thus, the droplet size of FP-stabilized emulsions (pH 3) increased from 21 to 38 μm after thermal treatment (80 °C), whereas the size distribution of particle-stabilized emulsions hardly changed. The latter emulsions also remained stable during 28 days of storage and displayed good stability against a wide range of pH conditions (2-9) and salt concentrations (0-500 mM) with no sign of oiling-off. The complex particles as Pickering emulsifiers were successful to depress the FO oxidation at 4 °C and 50 °C. This study could open a promising pathway for producing natural and surfactant-free emulsions through Pickering stabilization using plant-based biopolymer particles for protecting lipophilic bioactive components.