Literature DB >> 31513521

Biomechanics of the Injured Fibula Following Plate Fixation of a Concomitant Tibia Fracture To Fix or Not to Fix?

Ikemefuna Onyekwelu, Brent J Sinicrope, John T Riehl, Craig S Roberts, Michael J Voor.   

Abstract

BACKGROUND: The mechanical role of supplemental fibula fixation in both bone lower leg fractures is not well defined. The benefit of fibula plate fixation in this context is controversial. The purpose of this study was to ascertain the mechanical contributions of the fibula under three conditions (intact, fractured, or plated fibula) following standard tibia locked plating.
METHODS: A laboratory fracture model was created with 10 cadaveric legs (5 matched pairs) with no known history of lower extremity trauma or other musculoskeletal conditions. A both bone lower leg fracture was simulated by performing distal osteotomies, 3 to 5 cm above the tibia plafond, leaving a bony defect to simulate an unstable fracture (AOTrauma OTA classification 43-A3). Coronal and sagittal gauge-pins were placed above and below the fracture sites to measure relative displacement across three planes of motion. Axial and torsional loads were applied to the leg under the following conditions: tibia intact and fibula intact (control 1), tibia fracture and fibula intact, tibia fracture and fibula fracture (control 2), and the three conditions of primary interest: tibia plated and fibula intact, tibia plated and fibula fracture (osteotomy), and tibia plated and fibula plated. The load applied for level 1 was 75 N of axial compression and 0.3 Nm of torque, and the load for level 2 was 175 N of axial compression and 1.3 Nm of torque.
RESULTS: There were significant differences in motion across the fracture site of the injured leg when the tibia was not plated compared with an intact and plated tibia, p < 0.05. However, when the tibia was plated, there were no significant differences in fracture motion when the fibula was left either intact, osteotomized, or underwent supplemental plate fixation, p > 0.05. This was true regardless of the loads applied.
CONCLUSION: The mechanical stability of supplemental fibula fixation in a both bone lower leg fracture model was not significantly improved from standalone distal tibia fixation in this laboratory model. The clinical effects of these findings are yet to be demonstrated.

Entities:  

Mesh:

Year:  2018        PMID: 31513521

Source DB:  PubMed          Journal:  Bull Hosp Jt Dis (2013)        ISSN: 2328-4633


  3 in total

1.  A correlation analysis of short-term imaging manifestations and long-term function using ROC curve after tibial fracture surgery.

Authors:  Bo Zeng; Huiling Zhang; Xian Xu; Zhian Wu; Chun Xiong
Journal:  Am J Transl Res       Date:  2021-06-15       Impact factor: 4.060

2.  Comparison of the Effects of Intramedullary Nailing and Plate Fixation on Lower-Extremity Deep Vein Thrombosis after Tibial Fractures.

Authors:  Yuxuan Cong; Hongli Deng; Jinlai Lei; Chao Ke; Shuang Han; Kun Zhang; Hai Huang
Journal:  Comput Math Methods Med       Date:  2022-04-01       Impact factor: 2.238

3.  The effectiveness of a self-made modular elastic compression device for patients with a fracture of the tibia and fibula.

Authors:  Lingyuan Zeng; Yongrong Wang; Dongdong He; Yao He; Yuze Wang; Xiaochun Wei
Journal:  J Orthop Surg Res       Date:  2020-04-16       Impact factor: 2.359

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.