Literature DB >> 31485943

Elimination of carcinogenic bromate ions from aqueous environment with 4-vinyl pyridine-g-poly(ethylene terephthalate) fibers.

Kübra Günay1, Metin Arslan2, Ogün Bozkaya3, Yaşar Aluç3, Zehra Gün Gök4.   

Abstract

In this study, poly(ethylene terephthalate) fibers grafted with 4-vinyl pyridine (PET-g-4VP) was synthesized with using a radical polymerization method and its removal capacity for bromate ions in the aqueous solution was explored. The synthesized graft copolymer was structurally characterized by scanning electron microscopy (SEM) and Fourier transformed infrared spectroscopy (FTIR). The effect of some parameters such as pH, grafting rate, processing time, and ion concentration on bromate removal was examined with batch experiments. The sorptions of bromate onto the PET-g-4VP fibers were both verified with FTIR and X-ray fluorescence analysis (XRF) and the remaining amount of bromate after adsorption process was determined with an ion chromatography (Shimadzu). Moreover, kinetic and isotherm studies were also performed for adsorption of bromate with the grafted fibers. The point of zero charge (pHpzc) of the PET-g-4VP fibers was found to be 7.5 and the fibers removed maximum amount of bromate from aqueous solution at pH 3. Equilibrium time of adsorption was determined to be 75 min and the adsorption kinetic was found to be pseudo-second-order model. It was observed that the increase in the amount of grafted 4VP onto the PET fibers increased the bromate removal capacity of the fibers; however, when the grafting yield of 4VP was over 80%, the bromate removal ability of the fibers decreased. The maximum bromate removal capacity of the PET-g-4VP was determined to be 183 mg/g when the initial bromate amount was 800 mg/L, treatment time was 75 min, pH of the solution was 3, and 4VP grafting yield was 80%. When the initial bromate concentration was higher than 800 mg/L, the removal rate of the PET-g-4VP fibers was not changed. In addition, bromate ion adsorption data indicated compliance with the Freundlich isotherm. The adsorbent fibers obtained by this study may be promising candidates for the removal of bromate ions from the aqueous media.

Entities:  

Keywords:  4-Vinyl Pyridine; Adsorption; Aqueous solution; Bromate; Copolymerization; Poly(ethylene terephthalate)

Mesh:

Substances:

Year:  2019        PMID: 31485943     DOI: 10.1007/s11356-019-06316-2

Source DB:  PubMed          Journal:  Environ Sci Pollut Res Int        ISSN: 0944-1344            Impact factor:   4.223


  14 in total

Review 1.  Use of iron oxide nanomaterials in wastewater treatment: a review.

Authors:  Piao Xu; Guang Ming Zeng; Dan Lian Huang; Chong Ling Feng; Shuang Hu; Mei Hua Zhao; Cui Lai; Zhen Wei; Chao Huang; Geng Xin Xie; Zhi Feng Liu
Journal:  Sci Total Environ       Date:  2012-03-04       Impact factor: 7.963

2.  Removal of BrO₃⁻ from drinking water samples using newly developed agricultural waste-based activated carbon and its determination by ultra-performance liquid chromatography-mass spectrometry.

Authors:  Mu Naushad; Mohammad R Khan; Zeid A ALOthman; Ibrahim AlSohaimi; Francisco Rodriguez-Reinoso; Turki M Turki; Rahmat Ali
Journal:  Environ Sci Pollut Res Int       Date:  2015-06-04       Impact factor: 4.223

3.  Enhanced adsorption of bromate from aqueous solutions on ordered mesoporous Mg-Al layered double hydroxides (LDHs).

Authors:  Huashun Ji; Wenhao Wu; Feihu Li; Xiaoxue Yu; Jingjing Fu; Luyao Jia
Journal:  J Hazard Mater       Date:  2017-04-06       Impact factor: 10.588

4.  Elimination of bromate from water using aluminum beverage cans via catalytic reduction and adsorption.

Authors:  Yi-Ting Chiu; Pei-Yu Lee; Thomas Wi-Afedzi; Jechan Lee; Kun-Yi Andrew Lin
Journal:  J Colloid Interface Sci       Date:  2018-07-26       Impact factor: 8.128

5.  High removal performance of a magnetic FPA90-Cl anion resin for bromate and coexisting precursors: kinetics, thermodynamics, and equilibrium studies.

Authors:  Zhengming Xu; Dexia Han; Yuan Li; Pingling Zhang; Lijun You; Zhengang Zhao
Journal:  Environ Sci Pollut Res Int       Date:  2018-04-23       Impact factor: 4.223

6.  Covalently-layers of PVA and PAA and in situ formed Ag nanoparticles as versatile antimicrobial surfaces.

Authors:  Vanessa H Fragal; Thelma S P Cellet; Guilherme M Pereira; Elizângela H Fragal; Marco Antonio Costa; Celso Vataru Nakamura; Tewodros Asefa; Adley F Rubira; Rafael Silva
Journal:  Int J Biol Macromol       Date:  2016-05-16       Impact factor: 6.953

7.  A study on the adsorption of methylene blue onto gum ghatti/TiO2 nanoparticles-based hydrogel nanocomposite.

Authors:  Hemant Mittal; Suprakas Sinha Ray
Journal:  Int J Biol Macromol       Date:  2016-03-17       Impact factor: 6.953

8.  Selective removal of Cr(VI) ions from aqueous solutions including Cr(VI), Cu(II) and Cd(II) ions by 4-vinyl pyridine/2-hydroxyethylmethacrylate monomer mixture grafted poly(ethylene terephthalate) fiber.

Authors:  Mustafa Yiğitoğlu; Metin Arslan
Journal:  J Hazard Mater       Date:  2008-11-30       Impact factor: 10.588

9.  Bromate removal from water by granular ferric hydroxide (GFH).

Authors:  Amit Bhatnagar; Yanghun Choi; Yeojoon Yoon; Yongsoon Shin; Byong-Hun Jeon; Joon-Wun Kang
Journal:  J Hazard Mater       Date:  2009-05-05       Impact factor: 10.588

10.  Bromate removal from aqueous solution with novel flower-like Mg-Al-layered double hydroxides.

Authors:  Yiqiong Yang; Qiao Ding; Dewei Wen; Minhui Yang; Yin Wang; Ning Liu; Xiaodong Zhang
Journal:  Environ Sci Pollut Res Int       Date:  2018-07-25       Impact factor: 4.223

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.