Literature DB >> 31481289

The Use of Patient-Specific Implants in Oral and Maxillofacial Surgery.

Michael F Huang1, David Alfi2, Jonathan Alfi3, Andrew T Huang4.   

Abstract

This article summarizes the current use of patient-specific implants in oral and maxillofacial surgery.
Copyright © 2019 Elsevier Inc. All rights reserved.

Entities:  

Keywords:  3D printed plates; Computer-aided design; Computer-aided manufacture; Custom temporomandibular joint total joint replacement; Maxillofacial reconstruction; Orthognathic surgery; Patient-specific implants

Mesh：

Substances：

Year:  2019        PMID： 31481289     DOI： 10.1016/j.coms.2019.07.010

Source DB:  PubMed          Journal:  Oral Maxillofac Surg Clin North Am        ISSN： 1042-3699            Impact factor:   2.802


  10 in total

1.  Application of CAD/CAM technology for surgical treatment of condylar head fractures: A preliminary study.

Authors:  Tetiana Pavlychuk; Denis Chernogorskyi; Yurii Chepurnyi; Andreas Neff; Andrii Kopchak
Journal:  J Oral Biol Craniofac Res       Date:  2020-08-27

Review 2.  3D Printing and Virtual Surgical Planning in Oral and Maxillofacial Surgery.

Authors:  Adeeb Zoabi; Idan Redenski; Daniel Oren; Adi Kasem; Asaf Zigron; Shadi Daoud; Liad Moskovich; Fares Kablan; Samer Srouji
Journal:  J Clin Med       Date:  2022-04-24       Impact factor: 4.964

3.  The effects of comfort care on the recovery quality of oral and maxillofacial surgery patients undergoing general anesthesia.

Authors:  Yangyang Tian; Junxiu Lin; Fei Gao
Journal:  Am J Transl Res       Date:  2021-05-15       Impact factor: 4.060

4.  Cold Ablation Robot-Guided Laser Osteotome (CARLO®): From Bench to Bedside.

Authors:  Matthias Ureel; Marcello Augello; Daniel Holzinger; Tobias Wilken; Britt-Isabelle Berg; Hans-Florian Zeilhofer; Gabriele Millesi; Philipp Juergens; Andreas A Mueller
Journal:  J Clin Med       Date:  2021-01-24       Impact factor: 4.241

5.  Procedure Increasing the Accuracy of Modelling and the Manufacturing of Surgical Templates with the Use of 3D Printing Techniques, Applied in Planning the Procedures of Reconstruction of the Mandible.

Authors:  Paweł Turek; Paweł Pakla; Grzegorz Budzik; Bogumił Lewandowski; Łukasz Przeszłowski; Tomasz Dziubek; Sławomir Wolski; Jan Frańczak
Journal:  J Clin Med       Date:  2021-11-25       Impact factor: 4.241

6.  Soft Tissue Dehiscence Associated with a Titanium Patient-Specific Implant: A Prosthetic Solution as an Alternative to Soft Tissue Grafting.

Authors:  Sharaf Eldeen M Abbas; Mohamed A ELKhashab
Journal:  Case Rep Dent       Date:  2021-12-21

7.  Mandibular Reconstruction With Fibula Flap and Dental Implants Through Virtual Surgical Planning and Three Different Techniques: Double-Barrel Flap, Implant Dynamic Navigation and CAD/CAM Mesh With Iliac Crest Graft.

Authors:  Raúl Antúnez-Conde; José Ignacio Salmerón; Alberto Díez-Montiel; Marc Agea; Dafne Gascón; Ángela Sada; Ignacio Navarro Cuéllar; Manuel Tousidonis; Santiago Ochandiano; Gema Arenas; Carlos Navarro Cuéllar
Journal:  Front Oncol       Date:  2021-10-05       Impact factor: 6.244

Review 8.  Additive Manufactured Polymers in Dentistry, Current State-of-the-Art and Future Perspectives-A Review.

Authors:  Codruta Victoria Tigmeanu; Lavinia Cosmina Ardelean; Laura-Cristina Rusu; Meda-Lavinia Negrutiu
Journal:  Polymers (Basel)       Date:  2022-09-03       Impact factor: 4.967

9.  Automated segmentation of head CT scans for computer-assisted craniomaxillofacial surgery applying a hierarchical patch-based stack of convolutional neural networks.

Authors:  David Steybe; Philipp Poxleitner; Marc Christian Metzger; Leonard Simon Brandenburg; Rainer Schmelzeisen; Fabian Bamberg; Phuong Hien Tran; Elias Kellner; Marco Reisert; Maximilian Frederik Russe
Journal:  Int J Comput Assist Radiol Surg       Date:  2022-06-03       Impact factor: 3.421

10.  3D Patient-Specific Virtual Models for Presurgical Planning in Patients with Recto-Sigmoid Endometriosis Nodules: A Pilot Study.

Authors:  Giulia Borghese; Francesca Coppola; Diego Raimondo; Antonio Raffone; Antonio Travaglino; Barbara Bortolani; Silvia Lo Monaco; Laura Cercenelli; Manuela Maletta; Arrigo Cattabriga; Paolo Casadio; Antonio Mollo; Rita Golfieri; Roberto Paradisi; Emanuela Marcelli; Renato Seracchioli
Journal:  Medicina (Kaunas)       Date:  2022-01-06       Impact factor: 2.430
  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.