| Literature DB >> 31381292 |
Swapnil Ghodke1, Akio Yamamoto1, Hsuan-Chun Hu1, Shunsuke Nishino1, Takuya Matsunaga1, Dogyun Byeon1, Hiroshi Ikuta2, Tsunehiro Takeuchi1.
Abstract
In this study, the effect of the grain boundary density on the transport properties of the Re-substituted higher manganese silicide Mn30.4Re6Si63.6 has been investigated. The efficiency of electrical energy conversion from waste heat, mainly in thermoelectric generators, depends on how the thermal conduction is reduced, while the charge-carrier electrons/holes contribute to possess a large magnitude of both the electrical conductivity σ and Seebeck coefficient S. In this work, we tried to obtain such a condition with a novel approach of merging the energy-filtering effect at the grain boundaries to improve the power factor (PF) = S2σ. The nanostructuring and heavy-element substitution were also employed to greatly scatter the phonon conduction. As a result, enhancement of the PF was observed in the diffused nanostructure of annealed ribbon samples, and the enhancement was correlated with the formation of Schottky barriers at the grain boundary interface. Together with a reduction of the thermal conductivity to very low magnitude 1.27 W m-1 K-1, we obtained a maximum ZT = 1.15 at 873 K for the annealed ribbon samples.Entities:
Keywords: energy-filtering effect; grain boundaries; higher manganese silicide; liquid quenching; phonon scattering; ribbon sample; thick films
Year: 2019 PMID: 31381292 DOI: 10.1021/acsami.9b09397
Source DB: PubMed Journal: ACS Appl Mater Interfaces ISSN: 1944-8244 Impact factor: 9.229