Literature DB >> 31379298

Process intensification in fed-batch production bioreactors using non-perfusion seed cultures.

Andrew Yongky1, Jianlin Xu1, Jun Tian1, Christopher Oliveira1, Jia Zhao2, Kevin McFarland3, Michael C Borys1, Zheng Jian Li1.   

Abstract

Although process intensification by continuous operation has been successfully applied in the chemical industry, the biopharmaceutical industry primarily uses fed-batch, rather than continuous or perfusion methods, to produce stable monoclonal antibodies (mAbs) from Chinese hamster ovary (CHO) cells. Conventional fed-batch bioreactors may start with an inoculation viable cell density (VCD) of ~0.5 × 106 cells/mL. Increasing the inoculation VCD in the fed-batch production bioreactor (referred to as N stage bioreactor) to 2-10 × 106 cells/mL by introducing perfusion operation or process intensification at the seed step (N-1 step) prior to the production bioreactor has recently been used because it increases manufacturing output by shortening cell culture production duration. In this study, we report that increasing the inoculation VCD significantly improved the final titer in fed-batch production within the same 14-day duration for 3 mAbs produced by 3 CHO GS cell lines. We also report that other non-perfusion methods at the N-1 step using either fed batch or batch mode with enriched culture medium can similarly achieve high N-1 final VCD of 22-34 × 106 cells/mL. These non-perfusion N-1 seeds supported inoculation of subsequent production fed-batch production bioreactors at increased inoculation VCD of 3-6 × 106 cells/mL, where these achieved titer and product quality attributes comparable to those inoculated using the perfusion N-1 seeds demonstrated in both 5-L bioreactors, as well as scaled up to 500-L and 1000-L N-stage bioreactors. To operate the N-1 step using batch mode, enrichment of the basal medium was critical at both the N-1 and subsequent intensified fed-batch production steps. The non-perfusion N-1 methodologies reported here are much simpler alternatives in operation for process development, process characterization, and large-scale commercial manufacturing compared to perfusion N-1 seeds that require perfusion equipment, as well as preparation and storage vessels to accommodate large volumes of perfusion media. Although only 3 stable mAbs produced by CHO cell cultures are used in this study, the basic principles of the non-perfusion N-1 seed strategies for shortening seed train and production culture duration or improving titer should be applicable to other protein production by different mammalian cells and other hosts at any scale biologics facilities.

Entities:  

Keywords:  CHO cell culture manufacturing; Non-perfusion N-1 seed culture; inoculation density; monoclonal antibody; process intensification

Mesh:

Substances:

Year:  2019        PMID: 31379298      PMCID: PMC6816350          DOI: 10.1080/19420862.2019.1652075

Source DB:  PubMed          Journal:  MAbs        ISSN: 1942-0862            Impact factor:   5.857


  27 in total

Review 1.  Production of recombinant protein therapeutics in cultivated mammalian cells.

Authors:  Florian M Wurm
Journal:  Nat Biotechnol       Date:  2004-11       Impact factor: 54.908

2.  Conversion of a CHO cell culture process from perfusion to fed-batch technology without altering product quality.

Authors:  F Meuwly; U Weber; T Ziegler; A Gervais; R Mastrangeli; C Crisci; M Rossi; A Bernard; U von Stockar; A Kadouri
Journal:  J Biotechnol       Date:  2005-12-01       Impact factor: 3.307

3.  The future of industrial bioprocessing: batch or continuous?

Authors:  Matthew S Croughan; Konstantin B Konstantinov; Charles Cooney
Journal:  Biotechnol Bioeng       Date:  2015-02-18       Impact factor: 4.530

Review 4.  Cell culture media for recombinant protein expression in Chinese hamster ovary (CHO) cells: History, key components, and optimization strategies.

Authors:  Frank V Ritacco; Yongqi Wu; Anurag Khetan
Journal:  Biotechnol Prog       Date:  2018-10-05

5.  Case Study: an accelerated 8-day monoclonal antibody production process based on high seeding densities.

Authors:  Ishai Padawer; Wai Lam W Ling; Yunling Bai
Journal:  Biotechnol Prog       Date:  2013-04-18

6.  High-density mammalian cell cultures in stirred-tank bioreactor without external pH control.

Authors:  Sen Xu; Hao Chen
Journal:  J Biotechnol       Date:  2016-06-16       Impact factor: 3.307

7.  Intracellular response to process optimization and impact on productivity and product aggregates for a high-titer CHO cell process.

Authors:  Michael W Handlogten; Allison Lee-O'Brien; Gargi Roy; Sophia V Levitskaya; Raghavan Venkat; Shailendra Singh; Sanjeev Ahuja
Journal:  Biotechnol Bioeng       Date:  2018-01       Impact factor: 4.530

8.  Improving titer while maintaining quality of final formulated drug substance via optimization of CHO cell culture conditions in low-iron chemically defined media.

Authors:  Jianlin Xu; Matthew S Rehmann; Xuankuo Xu; Chao Huang; Jun Tian; Nan-Xin Qian; Zheng Jian Li
Journal:  MAbs       Date:  2018-02-20       Impact factor: 5.857

Review 9.  Advances in recombinant antibody manufacturing.

Authors:  Renate Kunert; David Reinhart
Journal:  Appl Microbiol Biotechnol       Date:  2016-03-03       Impact factor: 4.813

10.  Continuous bioprocessing: the real thing this time? 10(th) Annual bioProcessUK Conference, December 3-4, 2013, London, UK.

Authors:  Suzanne S Farid; Bill Thompson; Andrew Davidson
Journal:  MAbs       Date:  2014       Impact factor: 5.857

View more
  9 in total

1.  Engineering death resistance in CHO cells for improved perfusion culture.

Authors:  Michael A MacDonald; Matthias Nöbel; Verónica S Martínez; Kym Baker; Evan Shave; Peter P Gray; Stephen Mahler; Trent Munro; Lars K Nielsen; Esteban Marcellin
Journal:  MAbs       Date:  2022 Jan-Dec       Impact factor: 6.440

Review 2.  Bioengineering Outlook on Cultivated Meat Production.

Authors:  Ivana Pajčin; Teodora Knežić; Ivana Savic Azoulay; Vanja Vlajkov; Mila Djisalov; Ljiljana Janjušević; Jovana Grahovac; Ivana Gadjanski
Journal:  Micromachines (Basel)       Date:  2022-02-28       Impact factor: 2.891

3.  Enabling speed to clinic for monoclonal antibody programs using a pool of clones for IND-enabling toxicity studies.

Authors:  Parimala Bolisetty; Gabi Tremml; Sen Xu; Anurag Khetan
Journal:  MAbs       Date:  2020 Jan-Dec       Impact factor: 5.857

4.  Biomanufacturing evolution from conventional to intensified processes for productivity improvement: a case study.

Authors:  Jianlin Xu; Xuankuo Xu; Chao Huang; James Angelo; Christopher L Oliveira; Mengmeng Xu; Xia Xu; Deniz Temel; Julia Ding; Sanchayita Ghose; Michael C Borys; Zheng Jian Li
Journal:  MAbs       Date:  2020-01-01       Impact factor: 5.857

5.  Exploring the limits of conventional small-scale CHO fed-batch for accelerated on demand monoclonal antibody production.

Authors:  Amélie Mahé; Alexandra Martiné; Séverine Fagète; Pierre-Alain Girod
Journal:  Bioprocess Biosyst Eng       Date:  2021-11-09       Impact factor: 3.210

6.  N-1 Perfusion Platform Development Using a Capacitance Probe for Biomanufacturing.

Authors:  Emily S C Rittershaus; Matthew S Rehmann; Jianlin Xu; Qin He; Charles Hill; Jeffrey Swanberg; Michael C Borys; Zheng-Jian Li; Anurag Khetan
Journal:  Bioengineering (Basel)       Date:  2022-03-22

7.  Improved Titer in Late-Stage Mammalian Cell Culture Manufacturing by Re-Cloning.

Authors:  Qin He; Matthew S Rehmann; Jun Tian; Jianlin Xu; Luzmary Sabino; Erik Vandermark; Ziev Basson; Iris Po; Kathleen Bierilo; Gabi Tremml; Giovanni Rizzi; Erik F Langsdorf; Nan-Xin Qian; Michael C Borys; Anurag Khetan; Zheng-Jian Li
Journal:  Bioengineering (Basel)       Date:  2022-04-15

8.  Upstream cell culture process characterization and in-process control strategy development at pandemic speed.

Authors:  Jianlin Xu; Jianfa Ou; Kyle P McHugh; Michael C Borys; Anurag Khetan
Journal:  MAbs       Date:  2022 Jan-Dec       Impact factor: 5.857

9.  Mapping the molecular basis for growth related phenotypes in industrial producer CHO cell lines using differential proteomic analysis.

Authors:  Laura Bryan; Michael Henry; Ronan M Kelly; Christopher C Frye; Matthew D Osborne; Martin Clynes; Paula Meleady
Journal:  BMC Biotechnol       Date:  2021-07-23       Impact factor: 2.563

  9 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.