Predicting the Debonding of CAD/CAM Composite Resin Crowns with AI.

A preventive measure for debonding has not been established and is highly desirable to improve the survival rate of computer-aided design/computer-aided manufacturing (CAD/CAM) composite resin (CR) crowns. The aim of this study was to assess the usefulness of deep learning with a convolution neural network (CNN) method to predict the debonding probability of CAD/CAM CR crowns from 2-dimensional images captured from 3-dimensional (3D) stereolithography models of a die scanned by a 3D oral scanner. All cases of CAD/CAM CR crowns were manufactured from April 2014 to November 2015 at the Division of Prosthodontics, Osaka University Dental Hospital (Ethical Review Board at Osaka University, approval H27-E11). The data set consisted of a total of 24 cases: 12 trouble-free and 12 debonding as known labels. A total of 8,640 images were randomly divided into 6,480 training and validation images and 2,160 test images. Deep learning with a CNN method was conducted to develop a learning model to predict the debonding probability. The prediction accuracy, precision, recall, F-measure, receiver operating characteristic, and area under the curve of the learning model were assessed for the test images. Also, the mean calculation time was measured during the prediction for the test images. The prediction accuracy, precision, recall, and F-measure values of deep learning with a CNN method for the prediction of the debonding probability were 98.5%, 97.0%, 100%, and 0.985, respectively. The mean calculation time was 2 ms/step for 2,160 test images. The area under the curve was 0.998. Artificial intelligence (AI) technology-that is, the deep learning with a CNN method established in this study-demonstrated considerably good performance in terms of predicting the debonding probability of a CAD/CAM CR crown with 3D stereolithography models of a die scanned from patients.