| Literature DB >> 31323711 |
Jing Li1, Yinming Du2, Teng Bao2, Jie Dong2, Meng Lin3, Hojae Shim4, Shang-Tian Yang5.
Abstract
Acetone-butanol-ethanol fermentation suffers from high substrate cost and low butanol titer and yield. In this study, engineered Clostridium tyrobutyricum CtΔack-adhE2 immobilized in a fibrous-bed bioreactor was used for butanol production from glucose and xylose present in the hydrolysates of low-cost lignocellulosic biomass including corn fiber, cotton stalk, soybean hull, and sugarcane bagasse. The biomass hydrolysates obtained after acid pretreatment and enzymatic hydrolysis were supplemented with corn steep liquor and used in repeated-batch fermentations. Butanol production with high titer (∼15 g/L), yield (∼0.3 g/g), and productivity (∼0.3 g/L∙h) was obtained from cotton stalk, soybean hull, and sugarcane bagasse hydrolysates, while corn fiber hydrolysate with higher inhibitor contents gave somewhat inferior results. The fermentation process was stable for long-term operation without any noticeable degeneration, demonstrating its potential for industrial application. A techno-economic analysis showed that n-butanol could be produced from lignocellulosic biomass using this novel fermentation process at ∼$2.5/gal for biofuel application.Entities:
Keywords: Biofuel; Butanol; Clostridium tyrobutyricum; Fermentation; Fibrous-bed bioreactor; Lignocellulosic biomass
Mesh:
Substances:
Year: 2019 PMID: 31323711 DOI: 10.1016/j.biortech.2019.121749
Source DB: PubMed Journal: Bioresour Technol ISSN: 0960-8524 Impact factor: 9.642