Literature DB >> 31292869

Experimental study on the emission characteristics of a non-road diesel engine equipped with different after-treatment devices.

Yunhua Zhang1, Diming Lou2, Piqiang Tan1, Zhiyuan Hu1.   

Abstract

A comparative experiment was conducted based on a non-road diesel engine to investigate the effects of two after-treatment devices on the engine's emission characteristics as well as their power and fuel consumption performances. The first after-treatment device is a combination of a diesel oxidation catalyst (DOC) and a catalytic diesel particulate filter (CDPF). The second device is a single CDPF-coated improved noble metal catalyst. Results showed that the two after-treatment devices had almost no effect on the power and fuel consumption performance. The gaseous and particulate emissions of the engine depended on the operation conditions including the speed and load. However, the dual DOC+CDPF system and the single CDPF reduced more than 81% of the carbon monoxide (CO) and 73% of the hydrocarbon (HC) emissions. Notably, the reduction efficiency by the single CDPF was higher than that of the DOC+CDPF system. In terms of the particulate emissions, both after-treatment devices achieved more than 96% reduction of the particle number (PN) and up to 88% reduction of the particulate mass (PM). Similarly, the single CDPF outperformed the dual DOC+CDPF system in reducing particle emissions. Although no changes occurred in the bimodal particle size distribution of the engine after the installation of the two after-treatment devices, they performed differently in reducing particles with different sizes. The particles reduction efficiency of the DOC+CDPF system was higher than that of the single CDPF for the particles smaller than 14.3 nm, and this trend converted for particles larger than 14.3 nm. Improving the noble metal catalyst load in the CDPF ensured a performance that rivaled the DOC+CDPF system. Apart from the NOx emissions, the installation of a single CDPF with an improved noble metal catalyst load can make the non-road diesel engine meet the limits of the China IV emission regulations.

Entities:  

Keywords:  CDPF; DOC+CDPF; Emission characteristics; Noble metal catalyst load; Non-road diesel engine

Mesh:

Substances:

Year:  2019        PMID: 31292869     DOI: 10.1007/s11356-019-05839-y

Source DB:  PubMed          Journal:  Environ Sci Pollut Res Int        ISSN: 0944-1344            Impact factor:   4.223


  2 in total

1.  Study of spatial and temporal aging characteristic of catalyzed diesel particulate filter catalytic performance used for diesel vehicle.

Authors:  Yun-Hua Zhang; Di-Ming Lou; Pi-Qiang Tan; Zhi-Yuan Hu
Journal:  Sci Rep       Date:  2020-11-13       Impact factor: 4.379

2.  Study on Emission Characteristics and Emission Reduction Effect for Construction Machinery under Actual Operating Conditions Using a Portable Emission Measurement System (Pems).

Authors:  Junhui Chen; Yuan Li; Zhongwei Meng; Xiaoqiong Feng; Junjie Wang; Honghui Zhou; Junjie Li; Jiacheng Shi; Qiang Chen; Hongle Shi; Shuxiao Wang
Journal:  Int J Environ Res Public Health       Date:  2022-08-03       Impact factor: 4.614

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.