Literature DB >> 31109536

Leather solid waste: An eco-benign raw material for leather chemical preparation - A circular economy example.

Murali Sathish1, Balaraman Madhan2, Jonnalagadda Raghava Rao3.   

Abstract

One of the long lasting problems associated with leather industry is to meet environmental standards for both liquid and solid wastes. Statistics show that one tonne of wet-salted hides/skins yields around 650 kg of solid waste. Among various wastes generated, trimmings for the most part have been underutilized. Collagen presents in trimmings waste are effectively used but hair goes unutilized or at the most as feed for boilers during gelatin manufacturing. Hence, newer technology is needed for complete and effective utilization of raw trimmings. In leather manufacture, formaldehyde condensates polymers are used as re-tanning agent to enhance the compaction of leather. However, these products are hard for biodegradation and also cause the release of free formaldehyde in leather, which is a known carcinogen. Here, there is a need for development of formaldehyde free re-tanning agent for eco-benign leather processing. In this work an attempt had been made to develop formaldehyde free biodegradable eco-benign re-tanning agent from raw trimming of tannery solid waste as a circular economy model. Alkaline (7.5%w/w NaOH) - hydrogen peroxide (10%w/w) pre-treatment followed by thermal hydrolysis at 100 °C for 5 h was an optimized method for effective hydrolysis of trimmings and the process of preparation of product results in the holistic utilization of raw trimmings. The developed product was characterized using Dynamic light scattering and FTIR techniques. The product prepared was further used in leather manufacture as a re-tanning agent and was found to impart multifunctional properties to leathers such as fullness, grain tightness and shade of dye brilliance. Product improves the mechanical strength characteristics of leather and also the exhaustion of post-tanning chemicals. SEM analysis shows that the experimental leather is more compact and flat than control. This novel strategy had not only solved the issue of solid waste but also resulted in a greener leather auxiliary leading to greener environment.
Copyright © 2019. Published by Elsevier Ltd.

Entities:  

Keywords:  Circular economy; Raw trimmings; Re-tanning agent; Solid waste; Tannery

Mesh:

Substances:

Year:  2019        PMID: 31109536     DOI: 10.1016/j.wasman.2019.02.026

Source DB:  PubMed          Journal:  Waste Manag        ISSN: 0956-053X            Impact factor:   7.145


  5 in total

1.  Study on the anhydrous condensation of collagen polypeptide and tricyanogen chloride.

Authors:  Donglei Liu; Jiaxing Zhang; Chuanrui You; Hui Chen; Zhihua Shan
Journal:  RSC Adv       Date:  2022-07-14       Impact factor: 4.036

Review 2.  Review of Soil Quality Improvement Using Biopolymers from Leather Waste.

Authors:  Daniela Simina Stefan; Magdalena Bosomoiu; Annette Madelene Dancila; Mircea Stefan
Journal:  Polymers (Basel)       Date:  2022-05-09       Impact factor: 4.967

3.  Melamine-Based Polymeric Crosslinker for Cleaner Leather Production.

Authors:  Srinivasan Pradeep; Murali Sathish; Kalarical Janardhanan Sreeram; Jonnalagadda Raghava Rao
Journal:  ACS Omega       Date:  2021-04-22

Review 4.  Composite Polymers from Leather Waste to Produce Smart Fertilizers.

Authors:  Daniela Simina Stefan; Magdalena Bosomoiu; Rodica Roxana Constantinescu; Madalina Ignat
Journal:  Polymers (Basel)       Date:  2021-12-12       Impact factor: 4.329

5.  Influence of preparation techniques of cellulose II nanocrystals as reinforcement for tannery solid waste-based gelatin composite films.

Authors:  Vimudha Muralidharan; Saiprasad Gochhayat; Saravanan Palanivel; Balaraman Madhan
Journal:  Environ Sci Pollut Res Int       Date:  2022-09-24       Impact factor: 5.190

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.