Preparation of AgNPs/saponite nanocomposites without reduction agents and study of its antibacterial activity.

A simple method for preparing AgNPs/clay nanocomposites using an adsorption process without any reducing agent was developed in which saponite iron-rich clay was both the solid inorganic support and reducing agent. Silver adsorption by ion exchange of silver ions and saponite ferrous ions resulted in simultaneous silver reduction and silver nanoparticle formation. The maximum loading of silver was determined as 48 mg/g (4.8 mass %). Microscopy showed a homogeneous distribution of sphere-like silver nanoparticles which are composed from smaller crystallites in the form of twinned triangular prisms. The silver particle sizes ranged from 1 nm to 50 nm but predominantly between 8 and 10 nm. The optimum pH range for silver immobilization on saponite support was between 4 and 8. Characterization of the clay samples and synthesized AgNPs/saponite nanocomposites was performed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR), porosimetry (low temperature nitrogen adsorption-desorption) and zeta potential measurements. The antibacterial activities of raw saponite and AgNPs/saponite nanocomposite samples were tested against clinical relevant Gram-positive Staphylococcus aureus, Staphylococcus epidermidis, and Gram-negative Escherichia coli, Pseudomonas aeruginosa and Proteus mirabilis bacteria by the well diffusion method.