OBJECTIVE: The color of all-ceramic restorations is one of the main criteria to achieve esthetical success. Many factors such as ceramic thickness, condensation techniques, firing temperature, and numbers can affect the final color of restoration. The purpose of this study was to investigate the color changes in alumina-based ceramic system according to ceramic shade and thickness during the multiple firings. MATERIALS AND METHODS: Sixty disc-shaped specimens with two different veneering porcelain shades (A1 or A3), and with three different ceramic thicknesses (0.5, 1, or 1.5 mm), were fabricated from an alumina-based ceramic system. Multiple firings (3, 5, 7, or 9 firings) were performed, and color changes (ΔE00 ) were determined using a spectrophotometer. Repeated-measures ANOVA were used to analyze the data. The Duncan test was used for multiple comparisons (α = .05). RESULTS: The L*a*b* values of the specimens were affected by the number of firings (3, 5, 7, or 9), veneering ceramic shades (A1 or A3) and veneering ceramic thicknesses (0.5, 1, or 1.5 mm). Significant interactions were present between the number of firings, veneering ceramic shade, and veneering ceramic thickness for L* (p < .001), a* (p < .001), and b* (p < .001) values. CONCLUSIONS: No statistically significant color change was observed between 3rd and 9th firings. CLINICAL SIGNIFICANCE: Veneering ceramic shade, veneering ceramic thickness, and number of firings should be carefully considered to obtain an acceptable color match of the definitive restorations.
OBJECTIVE: The color of all-ceramic restorations is one of the main criteria to achieve esthetical success. Many factors such as ceramic thickness, condensation techniques, firing temperature, and numbers can affect the final color of restoration. The purpose of this study was to investigate the color changes in alumina-based ceramic system according to ceramic shade and thickness during the multiple firings. MATERIALS AND METHODS: Sixty disc-shaped specimens with two different veneering porcelain shades (A1 or A3), and with three different ceramic thicknesses (0.5, 1, or 1.5 mm), were fabricated from an alumina-based ceramic system. Multiple firings (3, 5, 7, or 9 firings) were performed, and color changes (ΔE00 ) were determined using a spectrophotometer. Repeated-measures ANOVA were used to analyze the data. The Duncan test was used for multiple comparisons (α = .05). RESULTS: The L*a*b* values of the specimens were affected by the number of firings (3, 5, 7, or 9), veneering ceramic shades (A1 or A3) and veneering ceramic thicknesses (0.5, 1, or 1.5 mm). Significant interactions were present between the number of firings, veneering ceramic shade, and veneering ceramic thickness for L* (p < .001), a* (p < .001), and b* (p < .001) values. CONCLUSIONS: No statistically significant color change was observed between 3rd and 9th firings. CLINICAL SIGNIFICANCE: Veneering ceramic shade, veneering ceramic thickness, and number of firings should be carefully considered to obtain an acceptable color match of the definitive restorations.
Authors: Tariq S AbuHaimed; Saeed J Alzahrani; Sami A Farsi; Lulwa E Al-Turki; Maher S Hajjaj Journal: Materials (Basel) Date: 2022-09-30 Impact factor: 3.748