Recovery of phosphate as struvite from low-temperature combustion sewage sludge ash (LTCA) by cation exchange.

As a phosphorus-rich material, low-temperature combustion sewage sludge ash (LTCA) contains over 9 wt% content of phosphorus (P) and a large proportion of impurities, especially the content of Fe arrives at 14.59 wt%. To fully utilize LTCA as a fertilizer, this study investigated a procedure for P recovery from LTCA via struvite crystallization with fewer impurities. The adsorption characteristics of P and Fe by cation exchange resin (CER) were explored by simulating using the macroscopic parametric equation Thomas model. Optimum purification conditions for P-rich leachate by cation exchange column method were determined. Results showed that approximately 97.21 wt% of P was extracted from LTCA at HCl concentration of 0.8 M and liquid/solid ratio of 20.0 ml/g. More than 90 wt% of impurities could be detached by making P-rich leachate flow through cation exchange bed filled by CER at 300 ml/h. The macroscopic parametric equation Thomas model could clearly describe the adsorption characteristics of Fe in P-rich leachate by CER. Theoretical basis for purification of high concentration Fe in P-rich leachate by CER was provided. Approximately 84.04 wt% of total P in LTCA was recovered as struvite crystal which had low concentrations of heavy metals (5.96 mg/kg for Cr, 45.21 mg/kg for Cu, 29.67 mg/kg for Ni, 2.24 mg/kg for Pb, and 290.6 mg/kg for Zn) and could be eco-friendly for agricultural application. X-ray diffraction and SEM-EDS analysis validated the formation of struvite.