Literature DB >> 31055909

Exfoliation of Titanium Aluminum Carbide (211 MAX Phase) to Form Nanofibers and Two-Dimensional Nanosheets and Their Application in Aqueous-Phase Cadmium Sequestration.

Asif Shahzad1, Mohsin Nawaz2, Mokrema Moztahida1, Khurram Tahir1, Jiho Kim1, Youngsu Lim1, Bolam Kim1, Jiseon Jang3, Dae Sung Lee1.   

Abstract

A green approach was adopted to exfoliate a Ti2AlC MAX phase. The exfoliated nanostructures (Alk-Ti2Cfibr and Alk-Ti2Csheet) with exceptional mechanical, thermal, and water stabilites, as well as abundant oxygenated active binding sites, were synthesized via a controlled hydrothermal treatment in an alkaline environment. The successful synthesis of nanofibers and sheetlike nanostructures was inferred with scanning electron microscopy and X-ray diffraction analyses. Field emission scanning electron microscopy, field-emission transmission electron microscopy, Raman spectroscopy, Brunauer-Emmett-Teller surface area, ζ-potential analyses, and X-ray photoelectron spectroscopy were utilized to investigate the material's characteristics and its structural changes after metal ion adsorption. Heavy metal ion adsorption of the synthesized nanostructures was assessed in batch tests based on Cd2+ ion sequestration; the maximum adsorption capacity for Cd2+ was 325.89 mg/g, which is among the highest values reported for similar materials such as graphene oxide and its derivatives. The detailed quantitative investigation confirmed the interaction of hydroxyl groups with Cd2+ ions by electrostatic interactions, adsorption-coupled oxidation, and complex formation. Owing to their unique structure, high porosity, large specific surface area, and oxygenated functional groups, Alk-Ti2Csheet nanosheets were highly time-efficient for Cd2+ removal. Moreover, Alk-Ti2Cfibr and Alk-Ti2Csheet nanostructures were tested for simulated groundwater, showing that synthesized nanostructures were capable for removing Cd2+ ions at the ppb level. The results obtained from this study suggested that nanostructures synthesized using this route could provide a new approach to prepare and exfoliate additional MAX phases for the removal of heavy metal ions and other pollutants in the environment.

Entities:  

Keywords:  MAX phase; cadmium; nanofibers; nanosheets; nanostructures; wastewater

Year:  2019        PMID: 31055909     DOI: 10.1021/acsami.9b03899

Source DB:  PubMed          Journal:  ACS Appl Mater Interfaces        ISSN: 1944-8244            Impact factor:   9.229


  2 in total

Review 1.  2D MXene: A Potential Candidate for Photovoltaic Cells? A Critical Review.

Authors:  Muhammad Ahsan Saeed; Asif Shahzad; Kashif Rasool; Fahad Mateen; Jae-Min Oh; Jae Won Shim
Journal:  Adv Sci (Weinh)       Date:  2022-02-15       Impact factor: 16.806

2.  Two-Dimensional Titanium Carbides (Ti3C2Tx) Functionalized by Poly(m-phenylenediamine) for Efficient Adsorption and Reduction of Hexavalent Chromium.

Authors:  Linfeng Jin; Liyuan Chai; Weichun Yang; Haiying Wang; Liyuan Zhang
Journal:  Int J Environ Res Public Health       Date:  2019-12-25       Impact factor: 3.390

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.