Guideline on safety evaluation of cell-based medicinal products for animal use.

With the increased use of cell therapy in the veterinary sector, there is a growing demand for the development of cell-based medicinal products and the determination of their safety. Currently, the Korean Animal and Plant Quarantine Agency has established a guideline for evaluating the safety of cell-based medicinal products for animal use. The guideline includes items related to definition, classification, management, manufacturing procedure and quality control (standard and test method), stability testing, toxicity testing, pharmacological testing, and performance of clinical trials. In addition, testing protocols related to safety assessment of animal cell-based products such as chromosome karyotyping, tumorigenicity testing, confirmatory testing of biodistribution and kinetics, and target animal safety testing are described in detail. Moreover, because cell-based medicinal products are novel therapies, deviations from traditional designs may be justified in order to obtain relevant safety information on the treatment. Additionally, this guideline can be amended on the basis of new scientific findings.

This guideline aims to contribute to the proper evaluation of cell-based medicinal products (CBMP) for animal use and to ensure their safety, by presenting standard procedures for the safe evaluation of cell-based medicinal products conducted for manufacturing applications and marketing authorization of new veterinary medicinal products. Details not prescribed in this guideline are to be tested under the approval of the Animal and Plant Quarantine Agency (APQA).

OVERVIEW

Definition

“Cell-based medicinal products” refer to veterinary medicinal products that are manufactured by physical, chemical, and/or biological manipulation of autologous, allogeneic, and xenogeneic living cells in vitro, such as by culturing, multiplying, or selecting [1]. However, cases in which a veterinarian manipulates autologous or allogeneic cells during surgery or treatment in a medical institution, such as an animal hospital, shall be excluded from this category [1].

Classification

Cell-based medicinal products are divided into those derived from animal somatic cells or animal stem cells; furthermore, animal stem cell-derived products can be classified into products from animal adult stem cells, embryonic stem cells, or induced pluripotent stem cells [23].

Management

Cell-based medicinal products are managed as general veterinary drugs in terms of their efficacy, while they are managed according to regulations for biologics in terms of their properties and quality [13].

MANUFACTURING METHOD STANDARDS AND TEST METHODS

The safety of CBMP should be ensured primarily through quality control according to the manufacturing method of the corresponding product, its manufacturing standards, and the associated test method. Therefore, the following should be documented in accordance with the relevant provisions of CBMP contained in the Regulation on Safety and Efficacy Evaluation for Veterinary Medicinal Products (APQA Notice No. 2018-5) [1].

• Manufacturing process related to cell origin, cell collection (extraction and selection), freezing, thawing, primary culture, secondary culture and filling of cells, and its quality control requirements (storage conditions and periods, etc.)

• Specific screening information on the cell donor animals (whether the animals had infectious diseases, genetic mutations, etc.)

• Evidence of the absence of bacteria, fungi, mycoplasma, endotoxins, or adventitious viruses throughout the manufacturing process

STABILITY TESTING

Stability tests should be conducted according to the testing standard for long-term storage presented in the Guideline on Stability Testing for Veterinary Medicinal Products (APQA Notice). However, as it can be difficult to apply the general stability testing protocol due to the characteristics of CBMP, stability testing may be carried out by an appropriate test method that considers the characteristics of each product. In such a case, the storage method and expiration date shall be established by confirming the product's cell viability and potency through an appropriate stability test that considers the formulation, storage conditions, storage period, and transportation container and transport procedures (including temperature management) of the product, and the test's validity shall be documented. In particular, when a product is frozen or thawed, it shall be confirmed whether such product manipulations influence the stability or specifications of the product.

TOXICITY TESTING

Toxicity tests shall be conducted in compliance with the Guideline on Toxicity Testing for Veterinary Medicinal Products (APQA Notice No. 2016-22) [4]. However, as it can be difficult to apply the general toxicity testing protocol due to the characteristics of CBMP, toxicity testing may be carried out by using an appropriate test method that considers relevant regulations and the characteristics of each product. Furthermore, unlike general veterinary drugs, a combination of pharmacological and toxicity testing may be considered for CBMP.

Acute, subacute, and chronic toxicity testing

Acute, subacute, or chronic toxicity tests shall be conducted on at least one species of test animal (mouse, etc.) after considering the characteristics of the cell-based medicinal product. In such a case, the test may be carried out using a target animal or an appropriate animal model of the disease of interest. The test methods (administration route, dose level, frequency of administrations, observation period, etc.) shall be determined based on a comprehensive review of the clinical application method and the biodistribution and kinetics of the corresponding product, while evaluation items shall be determined in a manner that enables the prediction of adverse events, such as toxicity or ectopic tissue formation. Although the specific test method shall follow the relevant test protocol of the Guideline on Toxicity Testing for Veterinary Medicinal Products, that protocol may be followed by the test protocol for safety testing for the target animal.

Reproduction toxicity testing

When, during acute, subacute or chronic toxicity tests of a cell-based medicinal product, the corresponding cells are observed to be present in the gonads or reproductive tissues, or abnormalities in the reproductive system are confirmed, a reproductive toxicity test shall be conducted. The specific test methods should follow the relevant protocols of the Guideline on Toxicity Testing for Veterinary Medicinal Products.

Mutagenicity (or genotoxicity) testing

If a product has the potential to affect DNA or chromosomes, a mutagenicity test shall be conducted. However, the mutagenicity tests used for general veterinary drugs can be meaningless when applied for CBMP due to their characteristics. Therefore, mutagenicity testing can be conducted by confirming the transformation of cells other than the intended targets or by using a chromosome karyotyping test (Appendix 1) [5].

Carcinogenicity (or tumorigenicity) testing

When a cell-based medicinal product has tumorigenic potential, such as a product derived from animal stem cells or cells confirmed to have abnormalities in a mutagenicity test, a tumorigenicity test shall be conducted using an immunodeficient animal or an equivalent animal, with the test having an observation period (12 weeks or longer) that is suitable for tumor formation in the target animal body (Appendix 2) [5].

Local toxicity testing (or local tolerance testing)

A local toxicity test is conducted for clinical and histopathological evaluation at the injection site where a cell-based medicinal product is administered. This test may be conducted as an evaluation item within an acute, subacute, or chronic toxicity test.

Immunotoxicity testing (or confirmatory testing of immune system alteration)

When a cell-based medicinal product (limited to autologous cells) has the potential to cause an alteration in the immune system (e.g., changes in hematologic parameters, immunoglobulin levels, organ weights related to the immune system, etc.), an immunotoxicity test shall be conducted. Specific test methods shall follow the relevant test protocols of the Guideline on Toxicity Testing for Veterinary Medicinal Products. When there is no appropriate animal model, in vitro or ex vivo assays may be considered. Finally, this test needs to be included as an item in the evaluation of safety testing for the target animal.

Other special toxicity testing

A special toxicity test that is recognized as necessary according to the characteristics of the specific cell-based medicinal product shall be conducted.

PHARMACOLOGICAL ACTION TESTING

Pharmacological information for estimating the mechanism of action and efficacy of CBMP can be collected, but the data can only be used when the effectiveness of the corresponding products has been reasonably revealed by a review of domestic and foreign literature or knowledge. Furthermore, when a pharmacological action test of a cell-based medicinal product is conducted, it can be combined with toxicity testing; in such a case, the test methods and evaluation criteria should be scientifically and rationally validated.

Efficacy testing

In principle, efficacy testing shall be conducted using an appropriate test animal that can support the mechanism of pharmacological action and the effectiveness of the cell-based medicinal product. The efficacy test should demonstrate the expression, persistence, and effects of the product's pharmacological action. The efficacy test may be conducted as an additional item in the pharmacological action test when using a target animal or an appropriate animal model of the disease of interest.

General pharmacological testing

When a cell-based medicinal product or cell-derived bioactive substances other than the intended target are predicted to have adverse effects on the central nervous system, cardiovascular system, or respiratory system, a general pharmacological test shall be conducted to determine the effects on each system and function.

Testing for absorption, distribution, metabolism, and excretion

A confirmatory test of the biodistribution and kinetics, such as engraftment, proliferation, and persistence in multiple tissues, of a cell-based medicinal product shall be conducted using a target animal or an appropriate animal model of the disease of interest. In particular, when a cell-based medicinal product acts in a specific area (tissue type, etc.), its area or tissue localization should be demonstrated [2]. The test methods and evaluation criteria should be scientifically and rationally validated (Appendix 3).

CLINICAL TRIALS (INCLUDING TARGET ANIMAL SAFETY TESTING)

In principle, a clinical trial shall be conducted using a target animal or an appropriate animal model of the disease of interest (considering efficacy, compatibility, immune compatibility, etc.) only when it is unavoidable in accordance with the Guideline on Clinical Trial Management for Veterinary Medicinal Products (APQA Notice No. 2015-29) [6]. It is recommended that clinical trials should be conducted according to the approved protocol in order to obtain test results that are suitable for verifying the efficacy of the cell-based medicinal product and assessing its safety. When safety testing in a target animal is conducted, an appropriate test plan and evaluation items should be determined after considering the characteristics of each product and the guideline on target animal safety for veterinary pharmaceutical products excluding veterinary biologics (VICH GL43) of the Veterinary International Cooperation on Harmonization (VICH) [378]. Appendix 4 contains information on the standard test methods.