Shota Takenaka1, Takashi Kaito2, Ken Ishii3, Kota Watanabe4, Kei Watanabe5, Akira Shinohara6, Tomohisa Harada7, Fumiya Nakada8, Yusuke Majima8, Morio Matsumoto4. 1. Department of Orthopaedic Surgery, Osaka University Graduate School of Medicine, Suita, Japan. 2. Department of Orthopaedic Surgery, Osaka University Graduate School of Medicine, Suita, Japan. Electronic address: takashikaito@ort.med.osaka-u.ac.jp. 3. Department of Orthopedic Surgery, School of Medicine, International University of Health and Welfare, Chiba, Japan. 4. Department of Orthopedic Surgery, Keio University School of Medicine, Tokyo, Japan. 5. Department of Orthopaedic Surgery, Niigata University Medical and Dental Hospital, Niigata, Japan. 6. Department of Orthopaedic Surgery, The Jikei University School of Medicine, Tokyo, Japan. 7. Department of Spinal Surgery, Rakuwakai Marutamachi Hospital, Kyoto, Japan. 8. Medical Division, Kyocera Corporation, Kyoto, Japan.
Abstract
BACKGROUND: We conducted a finite element study to assess the effectiveness of a novel pedicle screw design with two alterations in the distal and proximal portions. METHODS: Finite element (FE) models of 24 vertebrae were constructed using computed tomographic data. Pull-out strength of 4 different pedicle screws were compared. The basic screw design was a dual threaded one (PS0), in which the proximal portion is double-threaded (cortical thread), and the distal portion is single-threaded (cancellous thread). In PS1, the inter-thread double-core shape was added to PS0 in the distal portion. Compared to PS0, in PS2, the proximal portion was elongated by 5 mm. PS3 had both PS1 and PS2 features. In addition, the 24 vertebrae were classified into 3 groups based on volumetric bone mineral density (vBMD) of the vertebral body: low <120 mg/cm3, moderate 120-170 mg/cm3, and high >170 mg/cm3. RESULTS: The mean pull-out strengths (±SD) were 1137 ± 500 N, 1188 ± 520 N, 1191 ± 512 N, and 1242 ± 538 N for PS0, PS1, PS2, and PS3, respectively. In PS1, there was significant difference in the incremental ratio of pull-out strength to PS0 between the low and high vBMD groups (3.7 ± 1.6% vs. 5.0 ± 1.0%, p = 0.006). In PS2, there was a significant difference in the incremental ratio to PS0 between the moderate and high vBMD groups (7.6 ± 4.0% vs. 3.3 ± 1.8%, p < 0.001). In PS3, there was a significant difference in the incremental ratio to PS0 between the moderate and high vBMD groups (12.1 ± 4.8% vs. 8.5 ± 2.1%, p = 0.003). CONCLUSIONS: The two design alterations showed the combined additive effect in the PS3 design. The moderate vBMD group has a balanced bone property to reflect the combined effects of the PS1 and PS2 design alterations.
BACKGROUND: We conducted a finite element study to assess the effectiveness of a novel pedicle screw design with two alterations in the distal and proximal portions. METHODS: Finite element (FE) models of 24 vertebrae were constructed using computed tomographic data. Pull-out strength of 4 different pedicle screws were compared. The basic screw design was a dual threaded one (PS0), in which the proximal portion is double-threaded (cortical thread), and the distal portion is single-threaded (cancellous thread). In PS1, the inter-thread double-core shape was added to PS0 in the distal portion. Compared to PS0, in PS2, the proximal portion was elongated by 5 mm. PS3 had both PS1 and PS2 features. In addition, the 24 vertebrae were classified into 3 groups based on volumetric bone mineral density (vBMD) of the vertebral body: low <120 mg/cm3, moderate 120-170 mg/cm3, and high >170 mg/cm3. RESULTS: The mean pull-out strengths (±SD) were 1137 ± 500 N, 1188 ± 520 N, 1191 ± 512 N, and 1242 ± 538 N for PS0, PS1, PS2, and PS3, respectively. In PS1, there was significant difference in the incremental ratio of pull-out strength to PS0 between the low and high vBMD groups (3.7 ± 1.6% vs. 5.0 ± 1.0%, p = 0.006). In PS2, there was a significant difference in the incremental ratio to PS0 between the moderate and high vBMD groups (7.6 ± 4.0% vs. 3.3 ± 1.8%, p < 0.001). In PS3, there was a significant difference in the incremental ratio to PS0 between the moderate and high vBMD groups (12.1 ± 4.8% vs. 8.5 ± 2.1%, p = 0.003). CONCLUSIONS: The two design alterations showed the combined additive effect in the PS3 design. The moderate vBMD group has a balanced bone property to reflect the combined effects of the PS1 and PS2 design alterations.