Synthesis of New GABAA Receptor Modulator with Pyrazolo[1,5-a]quinazoline (PQ) Scaffold.

We previously published a series of 8-methoxypirazolo[1,5-a]quinazolines (PQs) and their 4,5-dihydro derivatives (4,5(H)PQ) bearing the (hetero)arylalkylester group at position 3 as ligands at the γ-aminobutyric type A (GABAA) subtype receptor. Continuing the study in this field, we report here the design and synthesis of 3-(hetero)arylpyrazolo[1,5-a]quinazoline and 3-(hetero)aroylpyrazolo[1,5-a]quinazoline 8-methoxy substituted as interesting analogs of the above (hetero)arylalkylester, in which the shortening or the removal of the linker between the 3-(hetero)aryl ring and the PQ was performed. Only compounds that are able to inhibit radioligand binding by more than 80% at 10 μM have been selected for electrophysiological studies on recombinant α1β2γ2L GABAA receptors. Some compounds show a promising profile. For example, compounds 6a and 6b are able to modulate the GABAAR in an opposite manner, since 6b enhances and 6a reduces the variation of the chlorine current, suggesting that they act as a partial agonist and an inverse partial agonist, respectively. The most potent derivative was 3-(4-methoxyphenylcarbonyl)-8-methoxy-4,5-dihydropyrazolo[1,5-a] quinazoline 11d, which reaches a maximal activity at 1 μM (+54%), and it enhances the chlorine current at ≥0.01 μM. Finally, compound 6g, acting as a null modulator at α1β2γ2L, shows the ability to antagonize the full agonist diazepam and the potentiation of CGS 9895 on the new α+/β- 'non-traditional' benzodiazepine site.

1. Introduction

γ-aminobutyric type A (GABAA) receptors Type A (n class="Gene">GABAAR) and Type B (GABABR) are the principal inhibitory neurotransmitter receptors in the mammalian brain, and are the targets of many important drugs on the market for a variety of neurological conditions, including epilepsy, anxiety, spasticity, pain, and psychiatric illness [1]. The neurotransmitter GABA produces slow (sub-second) synaptic response by interaction with the GABABRs, belonging to the G-protein-coupled receptors (GPCR) category, or exerts fast (<10 ms) and powerful synaptic inhibition by acting on the GABAARs, which is a Cys-loop pentameric ligand gated ion channel (LGIC). This last family of receptors also includes the nicotinic acetylcholine receptors (nAChRs), the 5-hydroxytriptamine type 3 receptors (5-HT3Rs), and the glycine receptors, all of which show a similar topology, namely five homologous subunits assembled to form a central ion-conducting pore. Each subunit is formed by an N-terminal extracellular domain (ECD), four α-helices transmembrane domains (TM1–TM4), in which the TM2 of all the subunits is arranged to form the inner pore, and a C-terminal intracellular domain (ICD). To date, for the human GABAAR, 19 genes encoding the protein receptor have been sequenced and classified as different families, based on the degree of homology: α1–6, β1–3, γ1–3, δ, ε, π, θ, and ρ1–3 [2]. Although the combination of all the subunits could contribute to form the pentamer, α and β subunits are necessary to obtain a fully functional receptor. Subunit γ contributes to form the most abundant GABAA receptor subtype in the central nervous system (CNS), which is composed by 2α2β1γ subunits. Depending on the subunit isoforms (α1–6, β1–3, γ1–3) and regional brain distribution, each subtype receptor (α1βγ2, α2βγ2, α3βγ2, α4βγ2, α5βγ2, and α5βγ2) modulates different brain functions, and in general, its expression at synaptic or extrasynaptic sites mediates phasic or tonic inhibition [3,4]. The δ subunit can co-exist with αβ subunits to form a functional pentamer located exclusively extrasynaptically, or form the GABAAR subtype that spontaneously opens the gate, even in the absence of a neurotransmitter [5,6]. The principal binding sites of GABAAR are sited in the extracellular domain between two adjacent subunits; the first one is known as the “principal” (conventionally indicated with plus or +), and the other one is called the “complementary” subunit (indicated with minus or −) [4]. Thus, the two orthosteric GABA binding sites are located at the α+/β− interfaces, while the “benzodiazepine site” is located at the α+/β− interface. Recently, a renewed search for GABAAR has identified a new interaction site, which is similar to ‘benzodiazepine site’ and located at the homologous interface (α+/β−) [7,8,9]. The α subunit of this site contains the same protein loop sequences of the principal ‘benzodiazepine site α’ and, analogously to this latter, the six α isoforms and the three β isoforms in concert contribute to form the binding site [9]. This α+/β− ‘non-traditional’ benzodiazepine site was first described as the site for diazepam, which is able to produce a less specific GABA potentiation at micromolar concentration. The binding of diazepam at α+/β− is independent of the γ subunit, and it is insensible to flumazenil [10]. The first ligand discovered for this new site [11,12] was CGS 9895 (2-p-methoxyphenylpyrazolo[4,3-c]quinolin-3-(5H)-one), which is already known as a high affinity benzodiazepine site (α+/β−) antagonist. CGS 9895 showed also the ability to enhance the GABA currents at the α+/β− site, working as an agonist. Moreover, the binding to the low-affinity α+/β− binding site is not strictly bound to antagonistic activity at the benzodiazepine site. In fact, in a previous work, it has been demonstrated that also lorazepam and the imidazopyridine zolpidem in GABAA receptors devoid of the γ subunit were able to antagonize the positive modulatory effect of ligands chemically related to rimonabant [13]. Further studies afforded the identification of a number of selective/high affinity α+/β− site ligands [14,15]. In fact, as suggested in the paper of Varagic et al. [14], the GABAA receptor allosteric modulation by interaction with the new α+/β− site, as exerted by analogues of CGS 9895, is not dependent on the GABAA benzodiazepine-binding site (α+/β−). In fact, the authors demonstrated that subtype receptors α6β3 and α6β3γ2 containing the same alpha subunit were modulated by some pyrazoloquinolines and pyrazolopyrimidinones, which did not interact with the ‘benzodiazepine site’, since the interface α+/β− containing the α6 forms the well-known ‘diazepam-insensitive’ receptors. Even Knutson et al. [15] reported the study of new α6β3 not cytotoxic ligands as potential candidates for the treatment of CNS disorder and useful tools for drug development.

The achievement of the first crystal structure of the β3 homopentamer human n class="Gene">GABAA receptor at 3Å resolution [16] strongly improved the knowledge of the structural features of GABAAR. These results were recently corroborated by Zhu et al. [17], who obtained two high-resolution structures of GABAA receptor, in complex with GABA and flumazenil, using the cryo-electron microscopy. This study also revealed the presence of two sites located at equivalent positions to the GABA and benzodiazepine sites at the γ/β and α/β interfaces (this last one has already been identified and is known as the α+/β− ‘non-traditional benzodiazepine’ site) as potential targets for new drugs.

Our research group in a previous work reported the design and synthesis of new 8-methoxypyrazolo[1,5-a]quinazoline (n class="Chemical">PQ) and their 4,5-dihydro derivatives (4,5(H)PQ) bearing the (hetero)arylalkylester (3-Het/ArCH2COO–) group at position 3. These ligands showed high binding affinity (Ki = 0.2–34 nM) and anxiolityc-like/antihyperalgesic activity [18]. Continuing the study on ligands at the GABAA subtype receptor, we considered the shortening or the removal of the linker between the 3-(hetero)aryl ring and the PQ core as an interesting chemical modification of the previously reported ester derivatives. Thus, the synthesis of 8-methoxy 3-(hetero)arylpyrazolo[1,5-a]quinazoline and 3-(hetero)aroylpyrazolo[1,5-a]quinazoline was planned. These compounds are most likely more metabolically stable then ester derivatives [18], and are structurally strictly related to compounds that have been claimed to be GABAA subtype receptor ligands such as Indiplon, Ocinaplon [4,19,20], and compounds of type I and II [21,22,23] (Figure 1, Panel A). All of these compounds belong to the pyrazolopyrimidines, triazolophtalazine, or pyrazolobenzotriazine family, whose core is easily recovered in our new synthesized PQ compounds (Figure 1, Panel B).

Figure 1

Panel (A): γ-aminobutyric type A (GABAA) receptor subtype ligands with chemical structures strictly related to the new pyrazoloquinazoline (PQ). Panel (B): general structure of new synthesized PQ compounds. Blue circle 3-aroylpyrazolopyrimidine moiety; Red circle 3-arylpyrazolopyrimidina moiety.

All new compounds were evaluated for their ability to displace n class="Chemical">[3H]flumazenil(Ro-151788) from its specific binding to Bz receptors in bovine membrane samples. Moreover, chlorine current on recombinant GABAA receptors of the α1β2γ2L type (expressed in frog oocytes of the Xenopus laevis species) was limited to those compounds that are able to inhibit radioligand binding by more than 80% at 10 μM. Additionally, for the most interesting compounds, the modulation on the new α+/β− ‘non-traditional’ benzodiazepine site was evaluated.

2. Results and Discussion

2.1. Chemistry

Two synthetic approach were developed to obtain the desired 3-(hetero)arylpyrazolo[1,5-a]quinazolines or n class="Chemical">3-(hetero)aroylpyrazolo[1,5-a]quinazolines:

condensation and next cyclization of the n class="Chemical">hydrazinobenzoic acid with suitable propanenitrile to directly obtain the pyrazolo[1,5-a]quinazoline scaffold bearing at position 3 the proper (hetero)aryl or (hetero)aroyl group (Scheme 1);

Scheme 1

Synthesis of pyrazolo[1,5-a]quinazolin-4(5H)-ones and pyrazolo[1,5-a]quinazolines bearing an aryl/heteroaryl ring or aroyl/heteroaroyl group at position 3. Reagents and conditions: (i) AcOH or dimethylformamide (DMF)/AcONa; (ii) anhydrous THF and LiAlH4/THF then air; (iii) POCl3/PCl5,N,N-diisopropylethylamine (DIPEA); (iv) EtOH, HCOONH4, Pd/C 10%.

introduction of the (hetero)aryl or (hetero)aroyl group through a functionalization of the position 3 (e.g., –H, –n class="Chemical">COOH) working on the tricyclic system that was previously synthesized (Scheme 2 and Scheme 3).

Scheme 2

Synthesis of 3-(hetero)arylpyrazolo[1,5-a]quinazoline. Reagents and conditions: (i) anhydrous THF and LiAlH4/THF; then, toluene, 10% Pd/C. (ii) Br2 or NIS, CH2Cl2; (iii) Suzuki conditions, arylboronic acids, ethanol abs., (PPh3)4Pd tetrakis(triphenylphosphine)palladium (0), sodium carbonate 2 M; (iv) THF/MeONa.

Scheme 3

Synthesis of 3-(hetero)aroylpyrazolo[1,5-a]quinazoline derivatives. Reagents and conditions: (i) For compound 6d Eaton’s reagent and anisole; for 6e–g: SOCl2 or Cl3CCN/PPh3, then SnCl4 and suitable ArH/HetH; (ii) SOCl2, 2-MeO-PhB(OH)2, toluene, Na2CO3 sol. 2 M; (iii) DMF, K2CO3, MeI.

In the first approach (Scheme 1), the 2-hydrazinobenzoic acid or the 4-methoxy-2-n class="Chemical">hydrazinobenzoic acid 1 and 2, [18] were reacted in AcOH or DMF/AcONa, with the appropriate 2-(hetero)aryl-3-oxapropanenitrile [21] or the corresponding 2-(hetero)aroyl-3-(dimethylamino)acrylonitrile [24], to obtain the final 3-(hetero)aryl (3a [, 3b–e) and 3(heteroaroyl)pyrazolo[1,5-a]quinazolin-4(5H)-ones (3f–h), respectively.

The aromatization of the quinazoline ring was obtained for n class="Chemical">compounds 3a–e by treatment with LiAlH4 in anhydrous THF, and further oxidation in the same vessel reaction (the corresponding 4,5-dihydropyrazolo[1,5-a]quinazolines were not isolated) to directly give the aromatic compounds 5a–e. Instead, compounds 3f–h were transformed into the corresponding 5-chloroderivatives (type 4 compounds), and the next reduction with HCOONH4 and 10% Pd/C yielded the final desired compounds 6a–c, without showing the corresponding dihydroderivatives.

In the second approach, modifications of position 3 of the n class="Chemical">pyrazolo[1,5-a]quinazoline scaffold were performed, depending on the final designed product (Scheme 2 and Scheme 3). For the introduction of the (hetero)aryl ring, the Suzuki coupling reaction was carried out (Scheme 2). The key intermediate 8 was obtained from 7, the 8-methoxypyrazolo[1,5-a]quinazolin-5(4H)-one, by treatment with LiAlH4/THF, and the next dehydrogenation with 10% Pd/C and toluene; compound 7, in turn, was achieved by decarboxylation of ethyl 8-methoxy-5-oxo-4,5-dihydropyrazolo[1,5-a] quinazoline 3-carboxylate [18]. Halogenation of position 3 of the PQ core, by bromine or N-iodosuccinimide (NIS), gave 9a,b, which were used as counterparts with the suitable boronic acid (2-MeO-phenyl-, 3-furan-, and 1-Boc-2-pyrrolboronic acid) in the Suzuki coupling reaction, yielding compounds 5f–h. The best yields were obtained starting from compound 9b. The deprotection of 3-(1-Boc-2-pyrrolyl)-8-methoxypyrazolo[1,5-a]quinazoline, 5h, by THF/MeONa, gave compound 5i.

For the introduction of a keto group at position 3, still working on the tricyclic system, the 8-methoxypyazolo[1,5-a]quinazoline-3-carboxylic acid 10 [ was used as the starting material. The n class="Chemical">3-(4-methoxyphenylcarbonyl)-8-methoxypyrazolo[1,5-a]quinazoline 6d was obtained with Eaton’s reagent and anisole, while the other compounds were obtained through the 3-acylchloride intermediate. The attempt to obtain the 3-carbonylderivatives by Suzuki coupling reaction failed, since for example, when using 2-MeO-phenylboronic acid as the counterpart, unexpectedly, only compound 5f was recovered, evidencing CO elimination and Ar–Ar coupling (Scheme 3). Thus, the Friedel–Craft reaction was applied and, after treatment of the 8-methoxypyazolo[1,5-a]quinazoline-3-carboxylic acid 9 with SOCl2 or Cl3CCN and PPh3 to give the 3-acylchloride intermediate, the appropriate (hetero)aryl was added, and the final products 6e–g were obtained. Compound 6g was also obtained by alkylation of 6f with DMF, K2CO3, and methyl iodide, but in low yield.

Finally, type 6 compounds were transformed into the n class="Chemical">corresponding 4,5-dihydroderivatives by treatment with NaBH3CN in AcOH, obtaining compounds 11a, b, and d–g, as shown in Scheme 4. When 3-(hetero)aryl substituted compounds (type 5) were reacted in the same conditions, the corresponding 4,5-dihydroderivatives were evidenced only in the reaction mixture by TLC, and were not isolated as pure compounds, because after the normal work up, they were converted again into the starting material.

Scheme 4

Synthesis of 3-(hetero)aroyl-4,5-dihydropyrazolo[1,5-a]quinazolines. Reagents and conditions: (i) AcOH/NaBH3CN.

2.2. Biological Evaluation

All of the new compounds were previously evaluated for their ability to displace n class="Chemical">[3H]flumazenil (Ro-151788) from its specific binding to Bz receptors in bovine membrane samples. Only compounds that were able to inhibit radioligand binding by more than 80% at 10 μM (5d–f, 6a–d, 6f,g, 11a,b,d) were further selected for electrophysiological studies on recombinant α1β2γ2L GABAA receptors.

Recombinant α1β2γ2L n class="Gene">GABAA receptors were expressed in Xenopus laevis oocytes, and the effects of compounds tested at 1 to 100 μM were assessed on the modulation of GABAA receptor function (Figure 2). The three sections of Figure 2 respectively report the experiments of pyrazoloquinazoline 3-(hetero)aryl substituted 5d–f (section a), 3-(hetero)aroyl substituted 6a–d, 6f,g (section b), and 4,5-dihydropyrazoloquinazoline-3-(hetero)aroyl substituted 11a,b,d (section c).

Figure 2

Concentration-response curves of compounds (A) 5d–f, (B) 6a–d, 6f,g, and (C) 11a,b,d on GABA-induced Cl− currents in Xenopus oocytes expressing recombinant α1β2γ2L GABAA receptors. Data are expressed as the percentage modulation of the response induced by GABA at EC5–10 values, and are the mean ± S.E.M of values obtained from two to nine oocytes. ** p < 0.01; * p < 0.05 Kruskal–Wallis test followed by the Dunn post-hoc test.

As evident in Figure 2 (section A), the first group of compounds (5d–f) was not able to modulate the n class="Gene">GABAA function through acting as a null modulator or antagonist. Among compounds 6a–d,f,g bearing an aroyl moiety at position 3 (Figure 2, section B), the 3-(2-methoxyphenylcarbonyl) -8-methoxypyrazolo[1,5-a]quinazoline 6a slightly, but not significantly, inhibited the GABAA receptor function at 100 μM. On the contrary, the 3-(thien-2-yl-carbonyl)-8-methoxypyrazolo[1,5-a]quinazoline 6b, slightly but significantly enhanced the GABAA receptor function until 100 μM, showing an EC50 = 11.97 μM and acting as a partial agonist (Emax + 42% at 100)

For the 4,5-dihydroderivatives 11a,b,d, which are reported in the third part of Figure 2 (section C), n class="Chemical">compound 11d stands out as enhancing the GABAA receptor function and reaching a maximum of activity at 1 μM (Emax + 54%), but maintaining a slightly positive variation in chloride current even at ≥0.01 μM.

In order to confirm whether those n class="Chemical">compounds that are null modulators act at the benzodiazepine binding site, 6g as a representative sample was evaluated for its ability to antagonize the full agonist diazepam. Figure 3 clearly demonstrated that the null modulator 6g is able to completely abolish the potentiation of the GABAA receptor function induced by 1 μ diazepam at 10 μM.

Figure 3

Compound 6g antagonized the potentiation of GABA-induced Cl− currents by diazepam in Xenopus oocytes expressing recombinant α1β2γ2L GABAA receptors. Data are expressed as the percentage potentiation of the response induced by GABA at EC5–10 values, and are the mean ± SEM of values obtained from four oocytes. p < 0.05 Mann–Whitney test.

Recently, other low-affinity sites for benzodiazepine, in addition to the high-affinity n class="Chemical">benzodiazepine binding site, have been discovered [9,17,26]. Among them, the site located in the extracellular domain at the α+/β− interface was demonstrated to be the target for the pyrazoloquinoline CGS 9895 (2-p-methoxyphenylpyrazolo[4,3-c]quinolin-3-(5H)-one, as shown in Figure 4), which was already identified as a null modulator (antagonist) at the high-affinity benzodiazepine site, and acts as a positive allosteric modulator [27]. Therefore, compound 6g was further tested for its ability to antagonize the potentiation of the GABAA receptor induced by CGS 9895.

Figure 4

Compound 6g reduced the potentiation of GABA-induced Cl− currents by CGS 9895 (2-p-methoxyphenylpyrazolo[4,3-c]quinolin-3-(5H)-one) in Xenopus oocytes expressing recombinant α1β2 GABAA receptors. Data are expressed as the percentage potentiation of the response induced by GABA at EC5–10 values, and are the mean ± SEM of values obtained from three to six oocytes.

The data obtained in GABAA receptors devoid of the γ subunit (α1β2) indicates that n class="Chemical">compound 6g reduces the potentiation of the GABAA receptor induced by CGS 9895 (10 μM) (about −58% at both 10 μM and 30 μM), suggesting that this compound binds the α+/β− low-affinity site, too. This interesting result seems to suggest that our compounds acting as null modulators or antagonists could be selective α+/β− low-affinity benzodiazepine binding site ligands. This hypothesis was preliminarily confirmed by compounds 5d and 5e, which in the same test completely blocked or strongly reduced the potentiation of the GABAA receptor function induced by CGS 9895, respectively (data not shown). In accordance with Sieghart et al. (2012) [8], we believe that drugs acting at the “non-canonical” α+/β− low-affinity binding site might display potential clinical relevance. It has been proposed that the compounds acting at this site could be beneficial for long-term epilepsy treatment. In fact, they will be able to interact with a broader variety of GABAA receptors a subtypes such as the δ, ε, and π subunit-containing GABAA receptors.

Results from electrophysiological studies on recombinant α1β2γ2L n class="Gene">GABAA receptors showed that the 3-aroyl derivatives are able to slightly induce a change in the agonist-evoked current. This evidence led us to speculate that the aroyl moiety at position 3 of the PQ scaffold could be responsible for this effect. The more active compounds 6a and 6b respectively bear the 2-methoxybenzoyl and thien-2-yl-carbonyl groups at position 3, which are both able to engage hydrogen bond interaction with receptor proteins. Also, it is noteworthy that compound 6b retains the same pyrazolo[1,5-a]pyrimidine substructure as indiplon (Figure 1), which is already known as a partial agonist. In particular, the carbonyl moiety (CO) and the 2-methoxy (2-OMe) substituent on the phenyl ring for 6a and the sulfur atom of the thienyl ring for 6b could provoke a change of conformation favorable for the effect; this is different from the 3-aryl substituted PQ, which is devoid of activity.

The very interesting result obtained with the 3-(4-methoxyphenylcarbonyl)-8-methoxy-4,5-dihydropyrazolo[1,5-a]quinazoline 11d, that shows an enhanced current at 1 μM, enn class="Chemical">couraged us to synthesize other derivatives with the 4,5-dihydropyrazolo[1,5-a]quinazoline scaffold, which is certainly worthy of remark.

3. Material and Methods

Melting points were determined with a Gallenkamp apparatus and were unn class="Chemical">corrected. Silica gel plates (Merk F254) and silica gel 60 (Merk 70–230 mesh) were used for analytical and column chromatography, respectively. The structures of all the compounds were supported by their IR spectra (KBr pellets in nujol mulls, Perkin-Elmer 1420 spectrophotometer) and 1H-NMR data (measured with a Bruker 400 MHz). Chemical shifts were expressed in δ ppm, using DMSO-d6 or CDCl3 as solvent. The chemical and physical data of new compounds are shown in Table S1; all of the microanalyses were performed with a Perkin-Elmer 260 analyzer for C, H, and N. Mass spectra (m/z) were recorded on an Electrospray ionisation time-of-flight mass spectrometry ESI-TOF mass spectrometer (Bruker Micro TOF), and reported mass values are within the error limits of ±5 ppm mass units. Microanalyses indicated by the symbols of the elements or functions were performed with a Perkin-Elmer 260 elemental analyzer for C, H, and N, and they were within ±0.4% of the theoretical values.

3.1. General Procedure for the Synthesis of

A suspension of 2-hydrazinobenzoic acid (1) or n class="Chemical">2-hydrazino-4-methoxybenzoic acid (2) (1.0 mmol) and 3-oxo-2-(2-thienyl)-propionitrile, 3-oxo-2-(3-thienyl)-propionitrile (1.1 mmol) in acetic acid (5 mL) was refluxed until the starting material disappeared in TLC (toluene/ethyl acetate/acetic acid 8:2:1 v/v/v as eluent). The final solution was treated with ice/water, and the precipitate was filtered and purified by recrystallization by a suitable solvent.

3.1.1. 3-(Thien-2-yl)pyrazolo[1,5-a]quinazolin-5(4H)-one (3b)

From 1 and 3-oxo-2-(2-thienyl)-propionitrile. Cream crystals, yield 80%; IR ν cm−1 3120, 1674; n class="Chemical">1H-NMR (DMSO-d6) δ 12.07 (bs, 1H, NH, exch.); 8.14 (d, 1H, H-9, J = 8.0); 8.09 (d, 1H, H-6, J = 8.0); 7.99 (s, 1H, H-2); 7.89 (t, 1H, H-7, J = 7.8 Hz); 7.50 (t, 1H, H-8, J = 7.8 Hz); 7.46 (d, 1H, H-3 thienyl, J = 4.8 Hz); 7.38 (d, 1H, H-5 thienyl, J = 3.6); 7.11 (m, 1H, H-4 thienyl). ESI-MS calcd for C14H9N3OS (267.31); found: m/z 268.01[M + H]+. Anal C14H9N3OS (C, H, N).

3.1.2. 3-(Thien-3-yl)pyrazolo[1,5-a]quinazolin-5(4H)-one (3c)

From 1 and 3-oxo-2-(3-thienyl)-propionitrile. Cream crystals, yield 52%; IR ν cm−1 3120, 1674; n class="Chemical">1H-NMR (CDCl3) δ 9.22 (bs, 1H, NH, exch.); 8.29 (d, 1H, H-9, J = 8.0); 8.20 (d, 1H, H-6, J = 8.0); 7.88 (s, 1H, H-2); 7.81 (t, 1H, H-7, J = 7.8 Hz); 7.48 (m, 2H, H-8, and H-2 thienyl); 7.35 (m, 2H, H-4, and H-5 thienyl). ESI-MS calcd for C14H9N3OS (267.31); found: m/z 267.88[M + H]+. Anal C14H9N3OS (C, H, N).

3.1.3. 8-Methoxy-3-(thien-2-yl)pyrazolo[1,5-a]quinazolin-5(4H)-one (3d)

From 2 and 3-oxo-2-(2-thienyl)-propionitrile. Cream crystals, yield 90%; IR ν cm−1 3137, 1697; n class="Chemical">1H-NMR (DMSO-d6) δ 11.89 (bs, 1H, NH, exch.); 8.05 (d, 1H, H-6, J = 8.8 Hz); 7.98 (s, 1H, H-2); 7.51 (d, H-9, J = 2.0 Hz); 7.46 (d, 1H, H-3 thienyl, J = 4.8 Hz); 7.38 (d, 1H, H-5 thienyl, J = 3.4 HZ); 7.09 (dd, 1H, H-4 thienyl, J = 4.8 Hz, J = 3.4 Hz); 7.06 (dd, 1H, H-7, J = 8.8 Hz, J = 2.0 Hz); 3.94 (s, 3H, OCH3). ESI-MS calcd for C15H11N3O2S (297.33); found: m/z 297.93[M + H]+. Anal. C15H11N3O2S (C, H, N).

3.1.4. 8-Methoxy-3-(thien-3-yl)pyrazolo[1,5-a]quinazolin-5(4H)-one (3e)

From 2 and 3-oxo-2-(3-thienyl)-propionitrile. Cream crystals, yield 67%; IR ν cm−1 3110, 1687; n class="Chemical">1H-NMR (DMSO-d6) δ 11.78 (bs, 1H, NH, exch.); 8.16 (s, 1H, H-2); 8.05 (d, 1H, H-6, J = 9.0 Hz); 7.84 (m, 1H, H-2 thienyl); 7.59 (m, 1H, H-4 thienyl); 7.51 (d, H-9, J = 2.4 Hz); 7.49 (d, 1H, H-5 thienyl, J = 4.0 Hz); 7.05 (dd, 1H, H-7, J = 9.0 Hz, J = 2.4 Hz); 3.94 (s, 3H, OCH3). ESI-MS calcd for C15H11N3O2S (297.33); found: m/z 298.03[M + H]+. Anal. C15H11N3O2S (C, H, N).

3.2. General Procedure for the Synthesis of

A suspension of 2-hydrazino-4-methoxybenzoic acid (2, 1.09 mmol), n class="Chemical">2-aroyl-3-(dimethylamino) acrylonitrile (1.09 mmol), and anhydrous sodium acetate (1.31 mmol) in DMF (4 mL) was refluxed until the starting material disappeared in TLC (toluene/ethyl acetate/methanol 8:2:1.5 v/v/v as eluent). The final solution was treated with ice/water, and the precipitate was filtered and purified by recrystallization by a suitable solvent.

3.2.1. 8-Methoxy-3-(2-methoxybenzoyl)pyrazolo[1,5-a]quinazolin-5(4H)-one (3f)

From 2 and 2-benzoyl-3-(dimethylamino)acrylonitrile. Cream crystals, yield 50%; IR ν cm−1 3167, 1687, 1674; n class="Chemical">1H-NMR (DMSO-d6) δ 11.29 (bs, 1H, NH, exch.); 8.09 (d, 1H, H-6, J = 8.8 Hz); 7.86 (s, 1H, H-2); 7.52 (t, 1H, H-4 phenyl, J = 8.4 Hz); 7.49 (d, H-9, J = 2.0 Hz); 7.38 (d, 1H, H-6 phenyl, J = 6.4 Hz); 7.19 (d, 1H, H-3 phenyl, J = 8.4 Hz); 7.13 (dd, 1H, H-7 J = 8.8 Hz, J = 2.0 Hz); 7.06 (t, 1H, H-5 phenyl, J = 7.2 Hz); 3.94 (s, 3H, 8-OCH3); 3.77 (s, 3H, OCH3). ESI-MS calcd for C19H15N3O4 (349,34); found: m/z 349.94[M + H]+. Anal. C19H15N3O4 (C, H, N).

3.2.2. 8-Methoxy-3-(thien-2-ylcarbonyl)pyrazolo[1,5-a]quinazolin-5(4H)-one (3g)

From 2 and 2-(2-thienylcarbonyl)-3-(dimethylamino)acrylonitrile. Pale yellow crystals, yield 65%; IR ν cm−1 3327, 1699, 1678; n class="Chemical">1H-NMR (DMSO-d6) δ 11.23 (bs, 1H, NH, exch.); 8.62 (s, 1H, H-2); 8.13–8.05 (m, 3H, H-6 and H-3, H-5 thienyl); 7.53 (d, 1H, H-9 J = 2.0 Hz); 7.30 (m, 1H, H-4 thienyl); 3.95 (s, 3H, OCH3). ESI-MS calcd for C16H11N3O3S (325,34); found: m/z 326.04[M + H]+. Anal. C16H11N3O3S (C, H, N).

3.2.3. 8-Methoxy-3-(thien-3-ylcarbonyl)pyrazolo[1,5-a]quinazolin-5(4H)-one (3h)

From 2 and 2-(3-thienylcarbonyl)-3-(dimethylamino)acrylonitrile. Pale yellow crystals, yield 65%; IR ν cm−1 3310, 1698, 1678; n class="Chemical">1H-NMR (DMSO-d6) δ 11.24 (bs, 1H, NH, exch.); 8.54 (d, 1H, H-2 thienyl, J = 1.2 Hz); 8.48 (s, 1H, H-2); 8.10 (d, 1H, H-6, J = 8.8 Hz); 7.71 (dd, 1H, H-5 thienyl, J = 5.2 Hz, J = 2.8 Hz); 7.59 (d, 1H, H-4 thienyl, J = 4.8 Hz); 7.54 (d, H-9, J = 2.0 Hz); 7.15 (dd, 1H, H-7, J = 8.8 Hz, J = 2.0 Hz); 3.96 (s, 3H, OCH3). ESI-MS calcd for C16H11N3O3S (325,34); found: m/z 325.94[M + H]+. Anal. C16H11N3O3S (C, H, N).

3.3. General Procedure for the Synthesis of

A solution of 3f–h (0.3 mmol) in POCl3 (3 mL) was heated (40–80 °C) and maintained under stirring until the starting material disappeared, as evaluated by TLC (n class="Chemical">toluene/ethyl acetate/methanol 8:2:1.5 v/v/v as eluent). The final solution was evaporated, and the residue was recuperated with ice/water, filtered, and washed with water and ethanol 80%.

3.3.1. 3-(2-Methoxyphenylcarbonyl)-5-chloro-8-methoxypyrazolo[1,5-a]quinazoline (4a)

Pale cream crystals, yield 95%; IR ν cm−1 1674; 1H-NMR (n class="Chemical">DMSO-d6) δ 8.44 (s, 1H, H-2); 8.19 (d, 1H, H-6, J = 9.2 Hz); 7.80 (d, H-9, J = 2.0 Hz); 7.52 (t, 1H, H-4 phenyl, J = 8.4 Hz); 7.36 (d, 2H, H-6 phenyl and H-3 phenyl, J = 6.8 Hz); 7.15 (d, 1H, H-7 J = 8.4 Hz); 7.04 (t, 1H, H-5 phenyl, J = 7.2 Hz); 4.04 (s, 3H, 8-OCH3); 3.64 (s, 3H, OCH3). ESI-MS calcd for C19H14N3O3Cl (367,79); found: m/z 368.39[M + H]+. Anal. C19H14N3O3Cl (C, H, N).

3.3.2. 3-(Thien-2-ylcarbonyl)-5-chloro-8-methoxypyrazolo[1,5-a]quinazoline (4b)

Pale yellow crystals, yield 95%; IR ν cm−1 1648; 1H-NMR (n class="Chemical">DMSO-d6) δ 8.72 (s, 1H, H-2); 8.22 (d, 1H, H-6, J = 9.2 Hz); 8.13 (d, 1H, H-3 thienyl J = 2.8 Hz); 8.06 (d, 1H, H-5 thienyl, J = 4.4 Hz); 7.82 (d, 1H, H-9 J = 2.0 Hz); 7.36 (dd, 1H, H-7, J = 8.8 Hz, J = 2.0 Hz); 7.29 (m, 1H, H-4 thienyl); 4.05 (s, 3H, OCH3). ESI-MS calcd for C16H10N3O2SCl (343,79); found: m/z 344.49[M + H]+. Anal. C16H10N3O2SCl (C, H, N).

3.3.3. 3-(Thien-3-ylcarbonyl)-5-chloro-8-methoxypyrazolo[1,5-a]quinazoline (4c)

Pale yellow crystals, yield 75%; IR ν cm−1 1647; 1H-NMR (n class="Chemical">DMSO-d6) δ 8.66 (s, 1H, H-2); 8.48 (d, 1H, H-2 thienyl, J = 1.2 Hz); 8.23 (d, 1H, H-6, J = 8.8 Hz); 7.85 (d, H-9, J = 2.0 Hz); 7.66 (m, 1H, H-5 thienyl); 7.59 (d, 1H, H-4 thienyl, J = 4.8 Hz); 7.38 (dd, 1H, H-7, J = 8.8 Hz, J = 2.0 Hz); 4.06 (s, 3H, OCH3). ESI-MS calcd for C16H10N3O2SCl (343,79); found: m/z 344.49[M + H]+. Anal. C16H10N3O2SCl (C, H, N).

3.4. General Procedure for the Synthesis of

LiAlH4/n class="Chemical">THF solution (2.8 mmol) was added to a suspension of 3a [25] and 3b–e (1.0 mmol) in anhydrous THF and the mixture refluxed. The reaction was monitored with TLC (toluene/ethyl acetate/methanol 8:2:1.5 v/v/v as eluent) until the starting material disappeared and a mixture of compounds was formed: the 4,5-dihydro and the 4,5-dehydro derivatives. Thus, the reaction was maintained at air to permit the complete oxidation to final pyrazolo[1,5-a]quinazoline derivatives. The careful addition of water, the next extraction with ethyl acetate, and the followed evaporation gave the final desired compounds.

3.4.1. 3-Phenylpyrazolo[1,5-a]quinazoline (5a)

Yellow crystals, yield 75%; 1H-NMR (n class="Chemical">DMSO-d6) δ 9.24 (s, 1H, H-5); 8.84 (d, 1H, H-9, J = 8.0 Hz); 8.67 (s, 1H, H-2); 8.29 (d, 2H, H-2 phenyl and H-6 phenyl, J = 8.0 Hz); 8.24–8.19 (m, 2H, H-6, and H-4 phenyl); 7.86 (t, 1H, H-8, J = 8.0 Hz); 7.73 (t, 2H, H-3 phenyl and H-5 phenyl, J = 8.0 Hz); 7.56 (t, 1H, H-7, J = 8.0 Hz). 13C-NMR (DMSO-d6) δ 155.7, 131.9, 130.8, 129.1, 128.7, 127.5, 97.5. ESI-MS calcd for C16H11N3 (245,10); found: m/z 245.8[M + H]+. Anal. C16H11N3 (C, H, N).

3.4.2. 3-(Thien-2-yl)pyrazolo[1,5-a]quinazoline (5b)

Pale yellow crystals, yield 52%; 1H-NMR (n class="Chemical">DMSO-d6) δ 9.08 (s, 1H, H-5); 8.62 (s, 1H, H-2); 8.37 (d, 1H, H-9, J = 8.0); 8.21 (d, 1H, H-6, J = 8.0); 7.82–7.63 (m, 2H, H-8, and H-5 thienyl); 7.46 (d, 1H, H-3 thienyl J = 4.6 Hz); 7.25 (t, 1H, H-7, J = 8.8 Hz); 7.27 (dd, 1H, H-4 thienyl, J = 4.6 Hz, J = 3.8). 13C-NMR (DMSO-d6) δ 165.5, 154.9, 145.7, 137.7, 135.4 135.1, 135.0, 131.8, 129.1, 120.8, 97.5. ESI-MS calcd for C15H11N3OS (281,33); found: m/z 281.93[M + H]+. Anal. C15H11N3OS (C, H, N).

3.4.3. 3-(Thien-3-yl)pyrazolo[1,5-a]quinazoline (5c)

Yellow crystals, yield 47%; 1H-NMR (n class="Chemical">DMSO-d6) δ 9.16 (s, 1H, H-5); 8.64 (s, 1H, H-2); 8.37 (d, 1H, H-9, J = 8.0); 8.21 (d, 1H, H-6, J = 8.0); 8.04–7.99 (m, 2H, H-8, and H-2 thienyl); 7.84 (d, 1H, H-5 thienyl, J = 4.8 Hz); 7.67 (m, 2H, H-7, and H-4 thienyl). 13C-NMR (DMSO-d6) δ 155.7, 133.4, 132.3, 128.3, 127.7, 127.4, 124.7, 76.8. ESI-MS calcd for C14H9N3S (251,31); found: m/z 252.71[M + H]+. Anal. C14H9N3S (C, H, N).

3.4.4. 3-(Thien-2-yl)-8-methoxypyrazolo[1,5-a]quinazoline (5d)

Pale yellow crystals, yield 75%; 1H-NMR (n class="Chemical">DMSO-d6) δ 9.05 (s, 1H, H-5); 8.59 (s, 1H, H-2); 8.14 (d, 1H, H-6 J = 8.8 Hz); 7.75 (d, 1H, H-9 J = 2.0 Hz); 7.63 (d, 1H, H-5 thienyl, J = 3.8 Hz); 7.46 (d, 1H, H-3 thienyl J = 4.6 Hz); 7.25 (dd, 1H, H-7, J = 8.8 Hz, J = 2.0 Hz); 7.27 (dd, 1H, H-4 thienyl, J = 4.6 Hz, J = 3.8); 4.01 (s, 3H, OCH3). 13C-NMR (DMSO-d6) δ 165.5, 154.9, 145.7, 137.7, 135.4 135.1, 135.0, 131.8, 129.1, 120.8, 117.5, 106.4, 55.8. ESI-MS calcd for C15H11N3OS (281,33); found: m/z 281.93[M + H]+. Anal. C15H11N3OS (C, H, N).

3.4.5. 3-(Thien-3-yl)-8-methoxypyrazolo[1,5-a]quinazoline (5e)

Pale yellow crystals, yield 70%; 1H-NMR (n class="Chemical">DMSO-d6) δ 9.04 (s, 1H, H-5); 8.62 (s, 1H, H-2); 8.13 (d, 1H, H-6, J = 8.8 Hz); 8.03 (d, 1H, H-2 thienyl J = 2.8 Hz); 7.85 (dd, 1H, H-4 thienyl, J = 5.0 Hz, J = 1.2 Hz); 7.75 (d, H-9, J = 2.2 Hz); 7.63 (dd, 1H, H-5 thienyl J = 5.0 Hz, J = 3.0 Hz); 7.24 (dd, 1H, H-7, J = 8.8 Hz, J = 2.2 Hz); 4.01 (s, 3H, OCH3). 13C-NMR (DMSO-d6) δ 165.9, 155.4, 145.5, 136.7, 128.9, 127.6, 125.2, 120.8, 117.5, 106.4, 55.8. ESI-MS calcd for C15H11N3OS (281,33); found: m/z 281.93[M + H]+. Anal. C15H11N3OS (C, H, N).

3.5. General Procedure for the Synthesis of

Triphenylphosphine palladium (0) (Tetrakis, 0.035 mmol), 2.4 mL of Na2CO3 solution 2M, and suitable (hetero)aryln class="Chemical">boronic acid (0.60 mmol) solubilized in 1 mL of absolute ethanol were added to a solution of 3-iodo- or 3-bromo-8-methoxypyrazolo[1,5-a]quinazoline (9a, 9b, see below) (0.2 mmol) in anhydrous THF (6 mL). The suspension was refluxed until the starting material disappeared in TLC; then, it was diluted with ethyl acetate, and water was added. The organic layer was separated and dried over Na2SO4 anhydrous and evaporated to dryness. The final compounds were purified by recrystallization by a suitable solvent. In general, it has been observed that from starting material 9a, the yield of coupling is better than starting from 9b.

3.5.1. 3-(2-Methoxyphenyl)-8-methoxypyrazolo[1,5-a]quinazoline (5f)

From 9a and 2-methoxyphenylboronic acid. Cream crystals, yield 45% (from 9b yield 20%); TLC:cyclohexane/n class="Chemical">ethyl acetate 2:1 v/v; 1H-NMR (CDCl3) δ 8.82 (s, 1H, H-5); 8.61 (s, 1H, H-2); 8.20 (dd, 1H, H-7, J = 8.2 Hz, J = 2.0 Hz); 7.87 (d, H-9, J = 2.0 Hz); 7.83 (d, 1H, H-6, J = 8.2 Hz); 7.30 (dt, 1H, H-4 phenyl, J = 8.4 Hz, J = 1.6 Hz); 7.13–7.08 (m, 2H, H-5, H-6 phenyl); 7.03 (d, 1H, H-3 phenyl, J = 8.4 Hz); 4.05 (s, 3H, 8-OCH3); 3.92 (s, 3H, OCH3). 13C-NMR (DMSO-d6) δ 165.3, 160.9, 155.0, 145.6, 145.2, 137.7, 133.6, 131.7, 126.6, 123.9, 123.7, 117.5, 114.4, 113.8, 104.6, 96.3, 56.8, 55.8. ESI-MS calcd for C18H15N3O2 (305,33); found: m/z 305.93[M + H]+. Anal. C18H15N3O2 (C, H, N).

This compound was the only one product ren class="Chemical">covered by treatment of 10 with SOCl2 and 2-MeO-PhB(OH)2 in toluene and Na2CO3 sol. 2 M, in the attempt to obtain the 3-(2-methoxyphenylcarbonyl)-8-methoxypyrazolo[1,5-a]quinazoline 6a, yield 15%.

3.5.2. 3-(Fur-3-yl)-8-methoxypyrazolo[1,5-a]quinazoline (5g)

From 9a and 3-furylboronic acid. Pale yellow crystals, yield 43% (from 9b yield 22%); TLC: CHX/n class="Chemical">ethyl acetate 4:1 v/v; 1H-NMR (DMSO-d6) δ 8.97 (s, 1H, H-5); 8.47 (s, 1H, H-2); 8.13 (m, 2H, H-6 and H-4 furyl); 7.27 (m, 2H, H-2 furyl and H-9); 7.21 (dd, 1H, H-7, J = 8.8 Hz, J = 2.2 Hz); 7.10 (s, 1H, H-5 furyl); 3.98 (s, 3H, OCH3). 13C-NMR (DMSO-d6) δ 155.4, 144.1, 138.5, 133.4, 128.9, 120.8, 108.8, 106.4, 76.8, 55.8. ESI-MS calcd for C15H11N3O2 (265,27); found: m/z 265.97[M + H]+. Anal. C15H11N3O2 (C, H, N).

3.5.3. Tert-Butyl 2-(8-methoxypyrazolo[1,5-a]quinazolin-3-yl)-1H-pyrrole-1-carboxylate (5h)

From 9a and N-BOC-pyrrol-2-boronic acid. Oil, yield 37%; (from 9b yield 18%); TLC: n class="Chemical">toluene/ethyl acetate/acetic acid 8:2:1 v/v/v; 1H-NMR (CDCl3) δ 8.77 (s, 1H, H-5); 8.18 (s, 1H, H-2); 8.13 (m, 2H, H-6, and H-9); 7.41 (dd, 1H, H-3 pyrrole, J = 3.2 Hz, J = 1.6 Hz); 7.10 (dd, 1H, H-7, J = 8.8 Hz, J = 2.4 Hz); 6.46 (d, 1H, H-5 pyrrole, J = 2.8 Hz); 4.02 (s, 3H, OCH3); 1.35 (s, 9H, t-Bu). 13C-NMR (DMSO-d6) δ 155.4, 150.2, 133.4, 128.9, 120.8, 119.2, 115.9, 106.4, 99.0, 84.2, 55.8, 28.4. ESI-MS calcd for C20H20N4O3 (364.40); found: m/z 365.0[M + H]+. Anal. C20H20N4O3 (C, H, N).

3.6. 3-(1H-Pyrrol-2-yl)-8-methoxypyrazolo[1,5-a]quinazoline ()

A solution of 5h (0.11 mmol) in 2 mL of anhydrous n class="Chemical">THF was added to 1.5 mL of sodium methoxide solution 0.43 M. The reaction was kept at 40 °C for 4 h; then, it was cooled and diluted with ice/water until a precipitate was formed. Then, it was filtered and recrystallized by ethanol; yield 69%. TLC:CHX/ethyl acetate 4:1 v/v; 1H-NMR (CDCl3) δ 10.32 (bs, 1H, NH, exch.); 8.73 (s, 1H, H-5); 8.30 (s, 1H, H-2); 7.84 (m, 2H, H-6 and H-9); 7.11 (dd, 1H, H-7, J = 8.8 Hz, J = 2.0 Hz); 6.93 (m, 1H, H-3 pyrrole); 6.54 (m, 1H, H-5 pyrrole); 6.30 (m. 1H, H-4 pyrrole); 4.05 (s, 3H, OCH3). 13C-NMR (CDCl3) δ 165.8, 155.4, 146.8, 133.4, 120.8, 120.2, 124.0, 111.5, 106.8, 106.4, 55.8. ESI-MS calcd for C15H12N4O (264.28); found: m/z 264.88[M + H]+. Anal. C15H12N4O (C, H, N).

3.7. General Procedure for the Synthesis of

Ammonium formate 97% (7.83 mmol) and 20 mg of the catalyst n class="Chemical">Pd/C 10% was added to a solution of 4a–c (0.3 mmol) in ethanol abs. (4 mL). The reaction was maintained at reflux temperature for 1 h; then, the filtration of the catalyst and the next evaporation of the solution gave a residue that was recovered by ethanol 80%.

3.7.1. 3-(2-Methoxyphenylcarbonyl)-8-methoxypyrazolo[1,5-a]quinazoline (6a)

Pale cream crystals, yield 68%; IR ν cm−1 1639; 1H-NMR (n class="Chemical">DMSO-d6) δ 9.11 (s, 1H, H-5); 8.45 (s, 1H, H-2); 8.18 (d, 1H, H-6, J = 8.8 Hz); 7.79 (d, H-9, J = 2.0 Hz); 7.50 (t, 1H, H-4 phenyl, J = 8.4 Hz); 7.36–7.31 (m, 2H, H-7, and H-6 phenyl); 7.13 (d, 1H, H-3 phenyl, J = 8.4 Hz); 7.03 (t, 1H, H-5 phenyl, J = 7.6 Hz); 4.03 (s, 3H, 8-OCH3); 3.61 (s, 3H, OCH3). 13C-NMR (DMSO-d6) δ 196.3, 165.3, 160.9, 155.0, 145.6, 145.2, 137.7, 133.6, 131.7, 126.6, 123.9, 123.7, 117.5, 114.4, 113.8, 104.6, 96.3, 56.8, 55.8. ESI-MS calcd for C19H15N3O3 (333,34); found: m/z 333.94[M + H]+. Anal. C19H15N3O3 (C, H, N).

3.7.2. 3-(Thien-2-ylcarbonyl)-8-methoxypyrazolo[1,5-a]quinazoline (6b)

Pale yellow crystals, yield 74%; IR cm−1 1640; 1H-NMR (n class="Chemical">DMSO-d6) δ 9.22 (s, 1H, H-5); 8.70 (s, 1H, H-2); 8.21 (m, 2H, H-6 and H-3 thienyl); 8.03 (d, 1H, H-5 thienyl, J = 4.8 Hz); 7.82 (d, 1H, H-9, J = 2.0 Hz); 7.34 (dd, 1H, H-7, J = 8.8 Hz, J = 2.0 Hz); 7.27 (dd, 1H, H-4 thienyl, J = 4.4 Hz, J = 4.0); 4.03 (s, 3H, OCH3). 13C-NMR (DMSO-d6) δ 179.5, 165.5, 154.9, 145.7, 137.7, 135.4 135.1, 135.0, 131.8, 129.1, 120.8, 117.5, 106.4, 55.8. ESI-MS calcd for C16H11N3O2S (309,34); found: m/z 309.94[M + H]+. Anal. C16H11N3O2S (C, H, N).

3.7.3. 3-(Thien-3-ylcarbonyl)-8-methoxypyrazolo[1,5-a]quinazoline (6c)

Pale yellow crystals, yield 70%; IR ν cm−1 1640; 1H-NMR (n class="Chemical">DMSO-d6) δ 9.22 (s, 1H, H-5); 8.70 (s, 1H, H-2); 8.49 (s, 1H, H-2 thienyl); 8.20 (d, 1H, H-6, J = 8.8 Hz); 7.82 (d, H-9, J = 2.0 Hz); 7.66 (m, 1H, H-5 thienyl); 7.59 (d, 1H, H-4 thienyl, J = 4.8 Hz); 7.34 (dd, 1H, H-7, J = 8.8 Hz, J = 2.0 Hz); 4.04 (s, 3H, OCH3). 13C-NMR (DMSO-d6) δ 192.1, 165.9, 155.4, 145.5, 136.7, 128.9, 127.6, 125.2, 120.8, 117.5, 106.4, 55.8. ESI-MS calcd for C16H11N3O2S (309,34); found: m/z 309.94[M + H]+. Anal. C16H11N3O2S (C, H, N).

3.8. 3-(4-Methoxyphenylcarbonyl)-8-methoxypyrazolo[1,5-a]quinazoline ()

A 100-mL round-bottomed flask was charged with 8-methoxypyrazolo[1,5-a] quinazoline-3-carboxylic acid, 10 [18] (0.3 mmol), and the n class="Chemical">commercially available Eaton’s reagent (7.7%, w/w, of P2O5 in MsOH) (2.5 equiv) was added. The solution was kept at 60 °C for 20 min. After that, anisole (0.35 mmol) was added and maintained for 2 h at 60 °C. The final solution was treated with saturated solution of NaHCO3 to reach pH 8; the obtained precipitate was filtered and purified by recrystallization. Pale cream crystals, yield 66%; IR ν cm−1 1639; 1H-NMR (DMSO-d6) δ 9.13 (s, 1H, H-5); 8.56 (s, 1H, H-2); 8.20 (d, 1H, H-6, J = 8.8 Hz); 7.88 (d, 2H, H-2 and H-6 phenyl, J = 8.0 Hz); 7.82 (d, 1H, H-9, J = 2.0 Hz); 7.33 (dd, 1H, H-7, J = 8.0 Hz, J = 2.2 Hz); 7.04 (d, 2H, H-3 and H-5 phenyl, J = 8.0 Hz); 4.03 (s, 3H, 8-OCH3); 3.84 (s, 3H, OCH3). 13C-NMR (DMSO-d6) δ 187.1, 165.3, 163.2, 154.6, 154.5, 145.9, 144.6, 137.7, 132.3, 131.7, 131.6, 129.2, 120.7, 117.5, 117.2, 114.0, 113.8, 113.6, 112.9, 112.2, 96.4, 56.8, 55.9. ESI-MS calcd for C19H15N3O3 (333,34); found: m/z 333.94[M + H]+. Anal. C19H15N3O3 (C, H, N).

3.9. General Procedure for The Synthesis of

The starting material 8-methoxypyrazolo[1,5-a]quinazoline-3-carboxylic acid, 10 [18] (0.3 mmol), was suspended in n class="Chemical">CH2Cl2, 0.15 mL of trichloroacetonitrile, and 1.45 mmol of PPh3. The mixture was maintained at room temperature for 2 h, monitoring the reaction by TLC; when the corresponding 3-carbonylchloride was formed, SnCl4 anhydrous (0.9 mL) and the suitable heteroaryl were added. After 2 h, the reaction was quenched by the addition of HCl 6M, and the final solution was extracted with ethyl acetate. The organic layer was washed with NaOH 10% solution, dried, and evaporated, obtaining the final compound that was purified by recrystallization.

3.9.1. 3-(Fur-2-ylcarbonyl)-8-methoxypyrazolo[1,5-a]quinazoline (6e)

From 10 and furane. Pale yellow crystals, yield 20%; TLC: n class="Chemical">toluene/ethyl acetate/acetic acid 8:2:2 v/v/v; IR ν cm−1 1630; 1H-NMR (DMSO-d6) δ 9.25 (s, 1H, H-5); 8.80 (s, 1H, H-2); 8.24 (d, 1H, H-6, J = 8.8 Hz); 8.06 (s, 1H, H-5 furyl); 7.83 (d, 1H, H-9 J = 2.0 Hz); 7.66 (d, 1H, H-3 furyl, J = 3.6 Hz); 7.35 (dd, 1H, H-7, J = 8.8 Hz, J = 2.0 Hz); 6.77 (s, 1H, H-4 furyl); 4.04 (s, 3H, OCH3). 13C-NMR (DMSO-d6) δ 174.5, 154.2, 145.7, 138.0, 130.3, 118.7, 117.7, 113.9, 112.3, 111.8, 96.2, 56.4. ESI-MS calcd for C16H11N3O3 (293.28); found: m/z 293.88[M + H]+. Anal. C16H11N3O3 (C, H, N).

3.9.2. 3-(1H-pyrrol-2-ylcarbonyl)-8-methoxypyrazolo[1,5-a]quinazoline (6f)

From 10 and pyrrole. Cream crystals, yield 25%; TLC: toluene/n class="Chemical">ethyl acetate/acetic acid 8:2:2 v/v/v; 1H-NMR (CDCl3) δ 12.31 (bs, 1H, NH, exch.); 9.10 (s, 1H, H-5); 8.81 (s, 1H, H-2); 7.96 (d, 1H, H-6, J = 8.8 Hz); 7.90 (d, 1H, H-9, J = 2.0 Hz); 7.37 (m, 1H, H-3 pyrrole); 7.22 (dd, 1H, H-7, J = 8.8 Hz, J = 2.0 Hz); 7.16 (m, 1H, H-5 pyrrole); 6.39 (m. 1H, H-4 pyrrole); 4.08 (s, 3H, OCH3). 13C-NMR (CDCl3) δ 175.0, 165.8, 152.7, 146.8, 138.5, 130.5, 124.0, 117.8, 117.7, 113.9, 113.2, 110.9, 96.1, 56.4. ESI-MS calcd for C16H12N4O2 (292.29); found: m/z 292.99[M + H]+. Anal. C16H12N4O2 (C, H, N).

3.9.3. 3-(1-Methyl-1H-pyrrol-2-ylcarbonyl)-8-methoxypyrazolo[1,5-a]quinazoline (6g)

This product was obtained following the Friedel–Craft reaction from 10 and n class="Chemical">1-methyl-1H-pyrrole, yield 10%; or by the alkylation of 6f following the classical alkylation method: 0.15 mmol of 6f in 3 mL of anhydrous DMF, 0.15 mmol of NaH, and 0.02 mL of MeI. The reaction was kept at 35 °C for 1 h, and the precipitate that was obtained by the addition of water was filtered and recrystallized by ethanol/water; yield 87%. TLC: toluene/ethyl acetate/acetic acid 8:2:2 v/v/v; 1H-NMR (CDCl3) δ 9.10 (s, 1H, H-5); 8.51 (s, 1H, H-2); 7.91 (d, 1H, H-6, J = 8.8 Hz); 7.88 (d, 1H, H-9, J = 2.4 Hz); 7.18 (dd, 1H, H-7, J = 8.8 Hz, J = 2.4 Hz); 7.01 (dd, 1H, H-3 pyrrole, J = 4.0 Hz, J = 1.3 Hz); 7.16 (m, 1H, H-5 pyrrole); 6.39 (dd. 1H, H-4 pyrrole, J = 4.0 Hz, J = 2.8 Hz); 4.08 (s, 3H, NCH3); 4.06 (s, 3H, OCH3). 13C-NMR (CDCl3) δ 179.2, 165.9, 155.4, 145.5, 130.0, 128.9, 120.8, 117.3, 107.5, 106.4, 55.8, 37.8; ESI-MS calcd for C17H14N4O2 (306.32); found: m/z 307.02[M + H]+. Anal. C17H14N4O2 (C, H, N).

3.10. 8-Methoxypyrazolo[1,5-a]quinazolin-5(4H)-one ()

The decarboxylation of the ethyl 8-methoxy-5-oxo-4,5-dihydropyrazolo[1,5-a]quinazoline 3-carboxylate [18] (1.0 mmol) was obtained in n class="Chemical">H3PO4 at fusion condition. After that starting material disappeared in TLC (toluene/ethyl acetate/methanol 8:2:1.5 v/v/v as eluent), the treatment with ice/water gave a precipitate that was isolated and purified by recrystallization with ethanol. Cream crystals, yield 80%; IR ν cm−1 3137, 1697; 1H-NMR (DMSO-d6) δ 12.05 (bs, 1H, NH, exch.); 8.02 (d, 1H, H-6, J = 8.8 Hz); 7.76 (d, 1H, H-2, J = 2.0 Hz); 7.47 (d, H-9, J = 2.4 Hz); 7.02 (dd, 1H, H-7, J = 8.8 Hz, J = 2.4 Hz); 5.87 (d, 1H, H-3, J = 2.0 Hz); 3.92 (s, 3H, OCH3). ESI-MS calcd for C11H9N3O2 (215.21); found: m/z 215.91[M + H]+. Anal. C11H9N3O2 (C, H, N).

3.11. 8-Methoxypyrazolo[1,5-a]quinazoline ()

From 7, following the same procedure described for the synthesis of 5a–e. White crystals by n class="Chemical">ethanol; yield 85%. 1H-NMR (DMSO-d6): δ 8.95 (s, 1H, H-5); 8.16 (d, 1H, H-2, J = 2.2 Hz), 8.11 (d, 1H, H-6, J = 8.8 Hz); 7.75 (d, 1H, H-9, J = 2.4 Hz); 7.22 (dd, 1H, H-7, J = 8.8 Hz, J = 2.4 Hz); 6.77 (d, 1H, H-3, J = 2.2 Hz); 3.99 (s, 3H, OCH3). ESI-MS calcd for C11H9N3O (199,21); found: m/z 199.81[M + H]+. Anal. C11H9N3O (C, H, N).

3.12. General procedure for the synthesis of

A solution of starting material 8 (0.35 mmol) in dichloromethane (5 mL) was supplemented with an excess of n class="Chemical">bromine (0.8 mL) to obtain compound 9a or N-iodosucinimide (NIS, 1:2) for final product 9b. The final solution was evaporated to dryness, and the residue was recovered with 10% NaOH solution, filtered, and washed with water. The raw compound was recrystallized by a suitable solvent.

3.12.1. 3-Bromo-8-methoxypyrazolo[1,5-a]quinazoline (9a)

From 5e and bromine; yield 85%; n class="Chemical">1H-NMR (DMSO-d6): δ 9.03 (s, 1H, H-5); 8.33 (1, 1H, H-2), 8.16 (d, 1H, H-6, J = 8.8 Hz); 7.73 (d, 1H, H-9, J = 2.4 Hz); 7.26 (dd, 1H, H-7, J = 8.8 Hz, J = 2.4 Hz); 4.00 (s, 3H, OCH3). 13C-NMR (DMSO-d6) δ 155.4, 133.6, 128.9, 120.8, 106.4, 91.9, 55.8. ESI-MS calcd for C11H8N3OBr (278.10) found: m/z 278.7 [M + H]+. Anal. C11H8N3OBr (C, H, N). Anal C, H, N.

3.12.2. 3-Iodo-8-methoxypyrazolo[1,5-a]quinazoline (9b)

From 5e and NIS; white crystals; yield 85%. n class="Chemical">1H-NMR (DMSO-d6): δ 9.09 (s, 1H, H-5); 8.27 (s, 1H, H-2), 8.15 (d, 1H, H-6, J = 8.8 Hz); 7.73 (d, 1H, H-9, J = 2.2 Hz); 7.25 (dd, 1H, H-7, J = 8.8 Hz, J = 2.2 Hz); 4.00 (s, 3H, OCH3). 13C-NMR (DMSO-d6) δ 155.4, 138.1, 128.9, 120.8, 117.3, 106.4, 56.3, 55.8. ESI-MS calcd for C11H8N3OI (325.11); found: m/z 325.71[M + H]+. Anal. C11H8N3OI (C, H, N).

3.13. General procedure for the synthesis of

NaBH3CN (0.5 mmol) was added to a solution of starting material, 6a,b,d–g (0.15 mmol), in glacial n class="Chemical">acetic acid (5 mL); the mixture was maintained at 50 °C for 1 h, and the reaction was monitored by TLC (toluene/ethyl acetate/methanol 8:2:1.5 v/v/v as eluent). When the starting material disappeared, the mixture was cooled and water was added; the precipitate was collected by filtration and purified by recrystallization.

3.13.1. 3-(2-Methoxyphenylcarbonyl)-8-methoxy-4,5-dihydropyrazolo[1,5-a]quinazoline (11a)

From 6a, pale cream crystals, yield 68%; IR ν cm−1 3404, 1639; 1H-NMR (n class="Chemical">DMSO-d6) δ 7.82 (bs, 1H, NH, exch.); 7.44 (t, 1H, H-4 phenyl, J = 8.4 Hz); 7.32 (s, 1H, H-2); 7.27 (d, 1H, H-6 phenyl, J = 7.6 Hz); 7.20 (d, 1H, H-6, J = 8.4 Hz); 7.12 (d, 1H, H-3 phenyl, J = 8.4 Hz); 7.05 (d, H-9, J = 2.0 Hz); 7.04 (t, 1H, H-5 phenyl, J = 7.6 Hz); 6.74 (dd, 1H, H-7, J = 8.4 Hz, J = 2.0 Hz); 4.52 (s, 2H, CH2); 3.75 (s, 3H, 8-OCH3); 3.74 (s, 3H, OCH3). 13C-NMR (DMSO-d6) δ 196.3, 160.1, 149.6, 141.7, 134.7, 133.6, 130.9, 127.3, 126.6, 123.9, 117.4, 114.4, 112.2, 111.7, 104.6, 99.6, 55.6, 42.4. ESI-MS calcd for C19H17N3O3 (335,36); found: m/z 335.96[M + H]+. Anal. C19H17N3O3 (C, H, N).

3.13.2. 3-(Thien-2-ylcarbonyl)-8-methoxy-4,5-dihydropyrazolo[1,5-a]quinazoline (11b)

From 6b, pale yellow crystals, yield 74%; IR ν cm−1 3430, 1640; 1H-NMR (n class="Chemical">DMSO-d6) δ 8.19 (s, 1H, H-2); 7.96 (d, 1H, H-3 thienyl, J = 3.2 Hz); 7.91 (d, 1H, H-5 thienyl, J = 4.4 Hz); 7.84 (bs, 1H, NH, exch.); 7.23 (m 2H, H-6 and H-4 thienyl); 7.10 (d, 1H, H-9 J = 2.0 Hz); 6.76 (d, 1H, H-7, J = 8.4); 4.53 (s, 2H, CH2); 3.77 (s, 3H, OCH3). 13C-NMR (DMSO-d6) δ 177.9, 159.7, 150.4, 144.5, 141.3, 134.2, 132.0, 131.3, 129.6, 128.2, 112.6, 111.9, 103.3, 99.8, 55.9, 42.2.. ESI-MS calcd for C16H13N3O2S (311,36); found: m/z 312.06[M + H]+. Anal. C16H13N3O2S (C, H, N).

3.13.3. 3-(4-Methoxyphenylcarbonyl)-8-methoxy-4,5-dihydropyrazolo[1,5-a]quinazoline (11d)

From 6d, pale cream crystals, yield 50%; IR ν cm−1 3317, 1633; 1H-NMR (n class="Chemical">DMSO-d6) δ 7.82 (m, 2H, H-2 and NH exch.); 7.77 (d, 2H, H-2, and H-6 phenyl, J = 8.0 Hz); 7.21 (d, 1H, H-6, J = 8.4 Hz); 7.10 (s, 1H, H-9); 7.04 (d, 2H, H-3, and H-5 phenyl, J = 8.0 Hz); 6.75 (d, 1H, H-7, J = 6.8 Hz); 4.53 (s, 2H, CH2); 3.82 (s, 3H, 8-OCH3); 3.76 (s, 3H, OCH3). 13C-NMR (DMSO-d6) δ 187.1, 165.3, 163.2, 154.5, 145.9, 142.6, 137.7, 130.5, 128.4, 117.3, 114.3, 113.8, 111.7, 99.67, 56.8, 55.9, 42.0. ESI-MS calcd for C19H17N3O3 (335,36); found: m/z 334.76[M + H]+. Anal. C19H17N3O3 (C, H, N).

3.13.4. 3-(Fur-2-ylcarbonyl)-8-methoxy-4,5-dihydropyrazolo[1,5-a]quinazoline (11e)

From 6e, pale yellow crystals, yield 80%; IR ν cm−1 3325, 1680; 1H-NMR (n class="Chemical">CDCl3) δ 8.25 (s, 1H, H-2); 7.63 (s, 1H, H-5 furyl); 7.27 (m, 2H, H-9 and H-3 furyl); 7.17 (bs, 1H, NH exch.); 7.02 (d, 1H, H-6, J = 8.4 Hz); 6.70 (dd, 1H, H-7, J = 8.8 Hz, J = 2.0 Hz); 6.57 (m, 1H, H-4 furyl); 4.67 (s, 2H, CH2); 3.85 (s, 3H, OCH3). 13C-NMR (CDCl3) δ 142.0, 130.4, 127.4, 117.8, 116.0, 112.2, 112.1, 99.7, 55.6, 42.4. ESI-MS calcd for C16H13N3O3 (295.29); found: m/z 295.99[M + H]+. Anal. C16H13N3O3 (C, H, N).

3.13.5. 3-(1H-pyrrol-2-ylcarbonyl)-8-methoxy-4,5-dihydropyrazolo[1,5-a]quinazoline (11f)

From 6f; yield 25%; IR ν cm−1 3354, 1682; 1H-NMR (n class="Chemical">CDCl3) δ 9.54 (bs, 1H, NH pyrrole, exch.); 8.01 (s, 1H, H-2); 7.29 (d, 1H, H-9, J = 2.0 Hz); 7.03 (m, 4H, H-6, NH exch., H-3 and H-5 pyrrole); 6.70 (dd, 1H, H-7, J = 8.8 Hz, J = 2.0 Hz); 6.36 (m. 1H, H-4 pyrrole); 4.65 (s, 2H, CH2); 3.86 (s, 3H, OCH3). 13C-NMR (CDCl3) δ 178.8, 160.1, 149.6 141.7, 134.7, 130.9, 129.6, 127.3, 117.4, 112.2, 111.7, 108.0, 104.6, 99.6, 55.6, 42.4. ESI-MS calcd for C16H14N4O2 (294.31); found: m/z 293.61[M + H]+. Anal. C16H14N4O2 (C, H, N).

3.13.6. 3-(1-Methyl-1H-pyrrol-2-ylcarbonyl)-8-methoxypyrazolo[1,5-a]quinazoline (11g)

From 6g; yield 70%. 1H-NMR (n class="Chemical">CDCl3) δ 7.85 (s, 1H, H-2); 7.27 (d, 1H, H-9, J = 2.4 Hz); 7.00 (m, 2H, H-6 and NH exch.); 6.91 (m, 1H, H-3 pyrrole); 7.16 (m, 1H, H-5 pyrrole); 6.69 (d, 1H, H-7, J = 8.8); 6.17 (m. 1H, H-4 pyrrole); 4.62 (s, 2H, CH2); 3.93 (s, 3H, NCH3); 3.85 (s, 3H, OCH3). 13C-NMR (CDCl3) δ 178.8, 160.1, 149.6, 141.7, 134.7, 130.9, 129.5, 127,3, 117.3, 112.2, 111.7, 108.0, 104.6, 99.6, 55.6, 42.4, 36.8; ESI-MS calcd for C17H16N4O2 (308.33); found: m/z 308.93[M + H]+. Anal. C17H16N4O2 (C, H, N).

3.14. Radioligand Binding Assay

[3H]Ro15-1788 (specific activity 78.8 Ci/mmol) was obtained from Perkin Elmer. All of the other chemicals, which were of reagent grade, were obtained from n class="Chemical">commercial suppliers. Bovine cerebral cortex membranes were prepared as previously described [28,29]. The membrane preparations were diluted with 50 mM of tris-citrate buffer pH 7.4, and used in the binding assay. Protein concentration was assayed using the method of Lowry et al. [30]. [3H]Ro 15-1788 binding studies were performed as previously reported [21]. At least six different concentrations of each compound were used. The data of n = 5 experiments carried out in triplicate were analyzed by means of an iterative curve-fitting procedure (program Prism, GraphPad, San Diego, CA), which provided IC50, Ki, and SEM values for tested compounds, the Ki values being calculated from the Cheng and Prusoff equation [31].

3.15. General Methods for Electrophysiological Assays

3.15.1. Expression of Human Receptor Subunits

A mixture of pCDM8-based vectors for the α1, β2, or γ2L subunits of n class="Species">human GABAA receptors (total of 1.5 ng of DNA, comprising equal amounts of α, β, and γ subunit vectors), or equal amounts of α and β receptors for the expression of α1β2 receptors, were injected into the animal pole of X. laevis oocytes as described [32] with the use of a microdispenser (Drummond Scientific, Broomwall, PA). The injected oocytes were maintained at 13 °C in sterile modified Barth’s solution [MBS: 88 mM NaCl, 1 mM KCl, 10 mM HEPES-NaOH (pH 7.5), 0.82 mM MgSO4, 2.4 mM NaHCO3, 0.91 mM CaCl2, 0.33 mM Ca(NO3)2] supplemented with streptomycin (10 mg/L), penicillin (10,000 U/L), gentamicin (50 mg/L), theophylline (90 mg/L), and pyruvate (220 mg/L).

3.15.2. Electrophysiology

Electrophysiological measurements were performed in oocytes 2 to 4 days after DNA injection. Oocytes were placed in a rectangular chamber (volume ~100 µL) and perfused at a rate of 1.7 mL/min with n class="Disease">MBS at room temperature with the use of a roller pump (Cole-Parmer, Chicago, IL) and 18-gauge polyethylene tubing (Clay Adams, Parsippany, NJ, USA). Oocytes were impaled at the animal pole with two glass electrodes (0.5 to 10 MΩ) filled with 3 M of KCl, and were clamped at −70 mV with the use of an oocyte clamp (model OC725C; Warner Instruments, Hamden, CT). Currents were measured and analyzed with the pClamp 9.2 software (Molecular Devices, Union City, CA, USA). GABA (Sigma, St. Louis, MO, USA) was dissolved in MBS and applied to the oocytes for 30 s. Oocytes were perfused with test drugs for 30 s either in the absence of the agonists or in its presence at the EC5–10 (the concentration of agonist that induces a peak current equal to 5–10% of the maximal current elicited by the maximal concentration of the agonist). Compounds were first dissolved in DMSO at a concentration of 10 mM, and then diluted in MBS to the final concentrations. In each experiment, control responses were determined before and 10/15 min after application of the drug.

3.15.3. Statistics

Statistical analysis was performed on normalized data using the Kruskal–Wallis test followed by Dunn’s post hoc test or the Mann–Whitney test using GraphPad Prism 7 (Graph Pad Software, Inc., San Diego, CA, USA).

4. Conclusions

In this paper, new 8-methoxypyrazolo[1,5-a]quinazolines bearing at position 3 of the (hetero)aryl group (type 5 n class="Chemical">compounds) or (hetero)aroyl moiety (type 6 compounds) and their corresponding 4,5-dihydroderivatives (type 11 compounds) were synthesized and evaluated for their ability to modulate the recombinant α1β2γ2L GABAA receptors. Compounds that showed a certain modulation of chlorine current are 3-(hetero)aroylpyrazolo[1,5-a]quinazolines, and 6a and 6b were the most representative compounds. These products modulate the GABAAR in an opposite manner, suggesting that 6b acts as partial agonist and 6a acts as an inverse partial agonist.

Among the 3-(hetero)aroyl derivatives with the n class="Chemical">4,5-dihydropyrazolo[1,5-a]quinazoline scaffold, the most interesting compound was 11d, for which an effect on the chlorine current is measurable at ≥0.01 μM. This compound will be the object of further studies.

Finally, we found the profile of the null modulator 6g interesting, since it not only acts as an antagonist blocking the potentiation of the n class="Chemical">GABAergic function induced by diazepam (so interacting at the high-affinity benzodiazepine site located in the extracellular domain at the α+/β− [2]), but it also works as a positive allosteric modulator at the low-affinity site located in the extracellular domain at the α+/β− interface. These results suggest that this compound could act to both the high-affinity and the low-affinity benzodiazepine site, so we can hypothesize that it will display a much broader action than the classic high-affinity benzodiazepine site ligands.

Moreover, since 6g is the first compound acting via the α+/β− interface of n class="Gene">GABAA receptors with the PQ scaffold, it may represent an interesting lead for the discovery of a new class of ligand, which would be useful for the study of this recently discovered low-affinity benzodiazepine site.