Sorption behaviors of phenanthrene, nitrobenzene, and naphthalene on mesoplastics and microplastics.

The occurrence of plastic particles in aquatic environment has led to enormous concern in the past few years. The sorption behaviors of harmful organic compounds by plastic particles can increase their concentrations by several orders of magnitude influencing their global transport in the marine environment. Five types of mesoplastics (5-20 mm) and five types of microplastics (< 5 mm) were selected to investigate the sorption behaviors of three typical organic compounds (phenanthrene, nitrobenzene, and naphthalene). For phenanthrene, most microplastics have stronger sorption ability than that of mesoplastics due to the higher specific surface area (SSA). However, the sorption ability of nitrobenzene on low-density polyethylene (LDPE) mesoplastics was higher than that on LDPE microplastics, and the sorption ability of naphthalene on polyvinyl chloride (PVC) mesoplastics was higher than that on PVC microplastics, which were attributed to the presence of functional groups on the surface of mesoplastics, induced by adding slip agents, lubricant, plasticizer, stabilizer, etc. during film production. Talcum-filled polypropylene (PP) microplastics had strongest sorption ability to nitrobenzene and naphthalene due to the presence of talcum and high SSA. For unmodified microplastics, the sorption abilities of phenanthrene, nitrobenzene, and naphthalene were all followed the order of high-density polyethylene (HDPE) > polystyrene (PS) > LDPE > PVC after SSA normalization. Thus, SSA and the functional groups on the surface of plastic particles should be considered when the sorption behaviors of harmful organic compounds on plastic particles are studied.