Literature DB >> 30844954

Is the Cranial and Posterior Screw of the "Inverted Triangle" Configuration for Femoral Neck Fractures Safe?

Jacob C Hoffmann1, James Kellam1, Manickam Kumaravel2, Kurt Clark3, Milton L Chip Routt1, Joshua L Gary1.   

Abstract

OBJECTIVES: To determine the frequency where a posterior and cranial screw in a femoral neck that appeared contained on fluoroscopy violates the cortex.
METHODS: Ten specimens including the hemipelvis with the proximal femur were obtained from unidentified embalmed specimens that were to be cremated after an institutional review board waiver was granted. Under fluoroscopy, the posterior and cranial screw of the inverted triangle configuration for the femoral neck was placed using standard technique with a cannulated 6.5-mm screw. Anterior-posterior and lateral images of the final screw placement were blinded to 2 orthopaedic traumatologists and 1 musculoskeletal radiologist who were asked to determine whether the screw radiographically breached the posterior and cranial cortex. Cadavers were stripped of soft tissues and inspected for screw perforation. Screws were grouped as contained, thread extrusion, or core extrusion.
RESULTS: Reviewers classified all 10 screws as radiographically contained within the femoral neck. Cadavers were inspected and found to show: 4 of 10 with core extrusion, 3 of 10 with thread extrusion, and 3 of 10 screws contained within the femoral neck.
CONCLUSIONS: Seventy percent of screws that were judged to be radiographically contained had cortical breach near the area where the lateral epiphyseal vessels enter the femoral neck. We urge caution against placement of posterior-cranial implants with fluoroscopy alone even if they appear radiographically contained.

Entities:  

Mesh:

Year:  2019        PMID: 30844954     DOI: 10.1097/BOT.0000000000001461

Source DB:  PubMed          Journal:  J Orthop Trauma        ISSN: 0890-5339            Impact factor:   2.512


  7 in total

1.  Risk of bony violation with standard triple screw configurations for fixation of femoral neck fractures: A preliminary computed tomography based analysis.

Authors:  Vivek Trikha; Arvind Kumar; Samarth Mittal; Jigyasa Passey; Dushyant Chouhan; Siddharth Dubey
Journal:  J Clin Orthop Trauma       Date:  2020-05-05

2.  The oblique triangle configuration of three parallel screws for femoral neck fracture fixation using computer-aided design modules.

Authors:  Ru Yi Zhang; Jian Tao Li; Jing Xin Zhao; Zhe Zhao; Li Cheng Zhang; Cai Yun; Xiu Yun Su; Pei Fu Tang
Journal:  Sci Rep       Date:  2022-01-10       Impact factor: 4.379

3.  Avoiding the blood supply to the femoral head during cannulated screw fixation: A comparison of two techniques.

Authors:  Brett J Pettett; Nathan C Winek; Patrick J Schimoler; Alexander Kharlamov; Mark Carl Miller; Edward R Westrick
Journal:  OTA Int       Date:  2021-07-13

4.  Two Cannulated Screws Provide Sufficient Biomechanical Strength for Prophylactic Fixation in Adult Patients With an Aggressive Benign Femoral Neck Lesion.

Authors:  Guangtao Fu; Guoqing Zhong; Zehong Yang; Shi Cheng; Limin Ma; Yu Zhang
Journal:  Front Bioeng Biotechnol       Date:  2022-07-07

5.  The application of the 150° oblique tangential fluoroscopic view to detect the posterosuperior femoral neck screw in-out-in intraoperatively.

Authors:  Jian Zhang; Xin Tang
Journal:  Sci Rep       Date:  2022-07-27       Impact factor: 4.996

6.  A Novel 3D-Printed Device for Precise Percutaneous Placement of Cannulated Compression Screws in Human Femoral Neck Fractures.

Authors:  Cheng Long; Jin-Hai Liu; Xiang-Ping Chai; Xiang-Feng Liu; Zhi-Xi Duan
Journal:  Biomed Res Int       Date:  2021-06-10       Impact factor: 3.411

7.  Three-dimensional morphological analysis of the femoral neck torsion angle-an anatomical study.

Authors:  Ru-Yi Zhang; Xiu-Yun Su; Jing-Xin Zhao; Jian-Tao Li; Li-Cheng Zhang; Pei-Fu Tang
Journal:  J Orthop Surg Res       Date:  2020-05-27       Impact factor: 2.359

  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.