Literature DB >> 30799473

Effect of Thickness of Ceramic Veneers on Color Stability and Bond Strength of Resin Luting Cements Containing Alternative Photoinitiators.

Mauricio Castellanos, Alex Jose Delgado, Mario Alexandre Coelho Sinhoreti, Dayane Carvalho Ramos Salles de Oliveira, Nader Abdulhameed, Saulo Geraldeli, Jean-François Roulet.   

Abstract

PURPOSE: To evaluate the light transmittance of ceramic veneers of different thicknesses and verify their influence on the degree of conversion, color stability, and dentin bond strength of light-curing resin cements containing different photoinitiator systems.
MATERIALS AND METHODS: Experimental resin cements were fabricated containing camphorquinone and amine (CQ-amine), TPO, Ivocerin (IVO), or TPO and Ivocerin (TPO-IVO). All photoinitiators were characterized by UV-Vis spectrophotometry. Disk-shaped lithium disilicate ceramic specimens that were 0.4, 0.7, and 1.5 mm in thickness were prepared using IPS e.max Press (Ivoclar Vivadent, shade LT/A2). Light transmittance through each specimen was measured using spectrophotometry. Specimens of each cement (n = 10) were made in a custom-designed mold and were light cured through each glass-ceramic disk using a multiwave LED (Bluephase G2, Ivoclar Vivadent). CS was evaluated using spectrophotometry before and after artificial aging with UV light. DC was evaluated using FTIR-spectroscopy. Dentin µSBS was evaluated using 0.75-mm-thick specimens that were light cured under the same protocol (n = 10). All data were submitted to two-way ANOVA and Tukey's test (α = 0.05; β = 0.2).
RESULTS: CQ-amine cements showed the highest color changes (p < 0.05) due to increased yellowing when compared to the amine-free cements (p < 0.05). However, all cements showed a significant color change after aging when cured through ceramics up to 1.5 mm thick (p < 0.05). The TPO-IVO cement showed the highest DC and the IVO cement showed a similar DC when compared to the CQ-amine cement. The TPO cement presented the lowest DC (p = 0.0377). No differences in mean dentin µSBS were found among the cements, except for the TPO cement, which presented a lower mean dentin µSBS (p = 0.0277).
CONCLUSION: Amine-free cements containing Ivocerin and TPO seem to be a better alternative to CQ-amine cements, while not reducing either DC or dentin µSBS of amine-free cements. However, CQ-amine and amine-free cements still seem to change color over time.

Entities:  

Keywords:  ceramics; dental cements; dental photoinitiators

Mesh:

Substances:

Year:  2019        PMID: 30799473     DOI: 10.3290/j.jad.a41997

Source DB:  PubMed          Journal:  J Adhes Dent        ISSN: 1461-5185            Impact factor:   2.359


  2 in total

1.  Impact of Bleaching before or after Veneer Preparation on Color Masking Ability of Laminate Veneers: An In Vitro Study.

Authors:  Gollshang Ahmad Mhammed Dalloo; Bestoon Mohammed Faraj; Abdulsalam Rasheed Al-Zahawi
Journal:  Biomed Res Int       Date:  2021-04-27       Impact factor: 3.411

Review 2.  Selected Spectroscopic Techniques for Surface Analysis of Dental Materials: A Narrative Review.

Authors:  Katarzyna Kaczmarek; Andrzej Leniart; Barbara Lapinska; Slawomira Skrzypek; Monika Lukomska-Szymanska
Journal:  Materials (Basel)       Date:  2021-05-17       Impact factor: 3.623

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.