Literature DB >> 30784863

Studies on the chemical compatibility of soil-bentonite cut-off walls for landfills.

Haoqing Xu1, Shi Shu2, Shengwei Wang3, Aizhao Zhou4, Pengming Jiang5, Wei Zhu6, Xihui Fan7, Liang Chen8.   

Abstract

Leachate contains composite contaminants, and the chemical compatibility of soil-bentonite cut-off walls is unclear. To better understand the issue, Fujian standard sand is used to represent a sandy soil stratum. Two clays were used as additive to examine the chemical compatibility of the soil-bentonite model backfills under the condition of composite contaminants. The results indicate that there is a representative cation when the backfills are permeated with NaCl, CaCl2, and ZnCl2 solutions and an NaCl-CaCl2-ZnCl2 mixed solution of the same ionic strength. Ca2+ has the highest maximum ionic strength among all cations from leachates. Moreover, the change in hydraulic conductivity, bound water content and effective porosity of sand-bentonite with the Ca2+ concentration or chemical oxygen demand (COD) exhibit a concentration threshold; i.e., when the concentration is smaller than the threshold, the hydraulic conductivity and effective porosity significantly increase, whereas the bound water content rapidly decreases; when the concentration is higher than the threshold, the hydraulic conductivity, bound water content and effective porosity tend to stabilize. In addition, under the condition of composite contaminants, the threshold is observed, while the hydraulic conductivity, bound water content and effective porosity vary with the COD. Thus, both the type and concentration of chemicals can change the effective porosity and affect hydraulic conductivity. Furthermore, there is a power function relationship between permeability and the effective pore.
Copyright © 2019 Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Bound water; Chemical compatibility; Effective pore; Permeability; Soil-bentonite backfills

Mesh:

Substances:

Year:  2019        PMID: 30784863     DOI: 10.1016/j.jenvman.2019.02.051

Source DB:  PubMed          Journal:  J Environ Manage        ISSN: 0301-4797            Impact factor:   6.789


  1 in total

1.  The effects of potentially toxic metals (copper and zinc) on selected physical and physico-chemical properties of bentonites.

Authors:  Edyta Nartowska
Journal:  Heliyon       Date:  2019-10-04
  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.