Literature DB >> 30768911

Retrospective CBCT analysis of airway volume changes after bone-borne vs tooth-borne rapid maxillary expansion.

Golnaz Kavand, Manuel Lagravère, Katherine Kula, Kelton Stewart, Ahmed Ghoneima.   

Abstract

OBJECTIVES: To compare changes in upper airway volume after maxillary expansion with bone- and tooth-borne appliances in adolescents and to evaluate the dentoskeletal effects of each expansion modality.
MATERIALS AND METHODS: This retrospective study included 36 adolescents who had bilateral maxillary crossbite and received bone-borne maxillary expansion (average age: 14.7 years) or tooth-borne maxillary expansion (average age: 14.4 years). Subjects had two cone beam computed tomography images acquired, one before expansion (T1) and a second after a 3-month retention period (T2). Images were oriented, and three-dimensional airway volume and dentoskeletal expansion were measured. Analysis of variance was used to test for differences between the two expansion methods for pretreatment, posttreatment, and prepost changes. Paired t-tests were used to test for significance of prepost changes within each method.
RESULTS: Both groups showed significant increase only in nasal cavity and nasopharynx volume (P < .05), but not oropharynx and maxillary sinus volumes. Intermolar and maxillary width increased significantly in both groups (P < .05); however, the buccal inclination of maxillary molars increased significantly only in the tooth-borne group (P < .05). There was no significant difference between tooth- and bone-borne expansion groups, except for the significantly larger increase in buccal inclination of the maxillary right first molar after tooth-borne expansion.
CONCLUSIONS: In adolescents, both tooth- and bone-borne RME resulted in an increase in nasal cavity and nasopharynx volume, as well as expansion in maxillary intermolar and skeletal widths. However, only tooth-borne expanders caused significant buccal tipping of maxillary molars.

Keywords:  Airway; Bone-borne expansion; Tooth-borne expansion

Mesh:

Year:  2019        PMID: 30768911      PMCID: PMC8117203          DOI: 10.2319/070818-507.1

Source DB:  PubMed          Journal:  Angle Orthod        ISSN: 0003-3219            Impact factor:   2.079


  28 in total

1.  Nasal airway changes in bone-borne and tooth-borne rapid maxillary expansion treatments.

Authors:  Ousama Kabalan; Jillian Gordon; Giseon Heo; Manuel O Lagravère
Journal:  Int Orthod       Date:  2015-02-07

2.  Relationship between rapid maxillary expansion and nasal cavity size and airway resistance: short- and long-term effects.

Authors:  Nanci Lara Oliveira De Felippe; Adriana C Da Silveira; Grace Viana; Budi Kusnoto; Bonnie Smith; Carla A Evans
Journal:  Am J Orthod Dentofacial Orthop       Date:  2008-09       Impact factor: 2.650

3.  Transverse, vertical, and anteroposterior changes from bone-anchored maxillary expansion vs traditional rapid maxillary expansion: a randomized clinical trial.

Authors:  Manuel O Lagravère; Jason Carey; Giseon Heo; Roger W Toogood; Paul W Major
Journal:  Am J Orthod Dentofacial Orthop       Date:  2010-03       Impact factor: 2.650

4.  Miniscrew-assisted nonsurgical palatal expansion before orthognathic surgery for a patient with severe mandibular prognathism.

Authors:  Kee-Joon Lee; Young-Chel Park; Joo-Young Park; Woo-Sang Hwang
Journal:  Am J Orthod Dentofacial Orthop       Date:  2010-06       Impact factor: 2.650

5.  Three-dimensional computed tomography analysis of airway volume changes after rapid maxillary expansion.

Authors:  Tamara Smith; Ahmed Ghoneima; Kelton Stewart; Sean Liu; George Eckert; Stacy Halum; Katherine Kula
Journal:  Am J Orthod Dentofacial Orthop       Date:  2012-05       Impact factor: 2.650

6.  Skeletal and dental changes in the sagittal, vertical, and transverse dimensions after rapid palatal expansion.

Authors:  Chun-Hsi Chung; Blanca Font
Journal:  Am J Orthod Dentofacial Orthop       Date:  2004-11       Impact factor: 2.650

7.  Study of stress distribution and displacement of various craniofacial structures following application of transverse orthopedic forces--a three-dimensional FEM study.

Authors:  Alireza Jafari; K Sadashiva Shetty; Mohan Kumar
Journal:  Angle Orthod       Date:  2003-02       Impact factor: 2.079

8.  Morphologic changes of the nasal cavity induced by rapid maxillary expansion: a study on 3-dimensional computed tomography models.

Authors:  Adam Haralambidis; Arzu Ari-Demirkaya; Ahu Acar; Nazan Küçükkeleş; Mustafa Ateş; Selin Ozkaya
Journal:  Am J Orthod Dentofacial Orthop       Date:  2009-12       Impact factor: 2.650

9.  Effects on nasal airflow and resistance using two different RME appliances: a randomized controlled trial.

Authors:  Farhan Bazargani; Anders Magnuson; Björn Ludwig
Journal:  Eur J Orthod       Date:  2018-05-25       Impact factor: 3.075

10.  Three-dimensional evaluation of upper airway following rapid maxillary expansion: a CBCT study.

Authors:  Hakan El; Juan Martin Palomo
Journal:  Angle Orthod       Date:  2013-07-18       Impact factor: 2.079

View more
  14 in total

1.  Comparison of dimensions and volume of upper airway before and after mini-implant assisted rapid maxillary expansion.

Authors:  Qiming Li; Hongyi Tang; Xueye Liu; Qing Luo; Zhe Jiang; Domingo Martin; Jing Guo
Journal:  Angle Orthod       Date:  2020-05-01       Impact factor: 2.079

2.  Transverse dentoalveolar response of mandibular arch after rapid maxillary expansion (RME) with tooth-borne and bone-borne appliances.

Authors:  Antonino Lo Giudice; Vincenzo Ronsivalle; Manuel Lagravere; Rosalia Leonardi; Stefano Martina; Gaetano Isola
Journal:  Angle Orthod       Date:  2020-09-01       Impact factor: 2.079

3.  Evaluation of mandibular changes after rapid maxillary expansion: a CBCT study in youngsters with unilateral posterior crossbite using a surface-to-surface matching technique.

Authors:  Rosalia Maria Leonardi; Khaled Aboulazm; Antonino Lo Giudice; Vincenzo Ronsivalle; Vincenzo D'Antò; Manuel Lagravère; Gaetano Isola
Journal:  Clin Oral Investig       Date:  2020-08-02       Impact factor: 3.573

4.  Evaluation of pulp cavity/chamber changes after tooth-borne and bone-borne rapid maxillary expansions: a CBCT study using surface-based superimposition and deviation analysis.

Authors:  Antonino Lo Giudice; Rosalia Leonardi; Vincenzo Ronsivalle; Silvia Allegrini; Manuel Lagravère; Giuseppe Marzo; Gaetano Isola
Journal:  Clin Oral Investig       Date:  2020-08-29       Impact factor: 3.573

5.  Short-Term and Long-Term Changes of Nasal Soft Tissue after Rapid Maxillary Expansion (RME) with Tooth-Borne and Bone-Borne Devices. A CBCT Retrospective Study.

Authors:  Pietro Venezia; Ludovica Nucci; Serena Moschitto; Alessia Malgioglio; Gaetano Isola; Vincenzo Ronsivalle; Valeria Venticinque; Rosalia Leonardi; Manuel O Lagraverè; Antonino Lo Giudice
Journal:  Diagnostics (Basel)       Date:  2022-03-31

6.  One Step before 3D Printing-Evaluation of Imaging Software Accuracy for 3-Dimensional Analysis of the Mandible: A Comparative Study Using a Surface-to-Surface Matching Technique.

Authors:  Antonino Lo Giudice; Vincenzo Ronsivalle; Cristina Grippaudo; Alessandra Lucchese; Simone Muraglie; Manuel O Lagravère; Gaetano Isola
Journal:  Materials (Basel)       Date:  2020-06-21       Impact factor: 3.623

7.  [Progress of diagnosis and treatment of upper respiratory obstruction in patients with Treacher Collins syndrome].

Authors:  Yanxian Lin; Xiaoyang Ma; Li Teng
Journal:  Zhongguo Xiu Fu Chong Jian Wai Ke Za Zhi       Date:  2019-12-15

8.  Effects of rapid maxillary expansion or alternating rapid maxillary expansion and constriction on nasal mucociliary clearance : A randomized clinical trial.

Authors:  Zeynep Çoban Büyükbayraktar; Cenk Doruk; Mansur Doğan; Gökcan Ertaş
Journal:  J Orofac Orthop       Date:  2021-06-30       Impact factor: 1.938

9.  Description of a Digital Work-Flow for CBCT-Guided Construction of Micro-Implant Supported Maxillary Skeletal Expander.

Authors:  Antonino Lo Giudice; Vincenzo Quinzi; Vincenzo Ronsivalle; Stefano Martina; Orazio Bennici; Gaetano Isola
Journal:  Materials (Basel)       Date:  2020-04-12       Impact factor: 3.623

10.  CBCT and CAD-CAM technology to design a minimally invasive maxillary expander.

Authors:  Diego Sánchez-Riofrío; María J Viñas; Josep M Ustrell-Torrent
Journal:  BMC Oral Health       Date:  2020-11-04       Impact factor: 2.757

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.