Literature DB >> 30746766

Electrospun triple-layered PLLA/gelatin. PRGF/PLLA scaffold induces fibroblast migration.

Mehrdad Piran1,2, Mahdi Shiri3, Mahsa Soufi Zomorrod2, Elaheh Esmaeili2,4, Mina Soufi Zomorrod4, Nader Vazifeh Shiran5, Hossein Mahboudi6,7, Hamed Daneshpazhouh8, Naeimeh Dehghani8, Simzar Hosseinzadeh9.   

Abstract

The function of fibroblast cells in wounded areas results in reconstruction of the extra cellular matrix and consequently resolution of granulation tissue. It is suggested that the use of platelet-rich plasma can accelerate the healing process in nonhealing or slow-healing wounds. In this study, a simple and novel method has been used to fabricate an electrospun three-layered scaffold containing plasma rich in growth factor with the aim of increasing the proliferation and migration of fibroblast cells in vitro. First, plasma rich in growth factor was derived from platelet rich plasma, and then a three-layered scaffold was fabricated using PLLA nanofibers as the outer layers and plasma rich in growth factor-containing gelatin fibers as the internal layer. The growth morphology of cells seeded on this scaffold was compared to those seeded on one layered PLLA scaffold. The study of the cell growth rate on different substrates and the migration of cells in response to the drug release of multilayered scaffold was investigated by the cell quantification assay and a modified under agarose assay. Scanning electron microscopy and fluorescence images showed that cells seeded on multilayered scaffold were completely oriented 72 hours after seeding compared to those seeded on PLLA scaffold. The cell quantification assay also indicated significant increase in proliferation rate of cells seeded on three-layered scaffold compared to those seeded on PLLA scaffold and finally, monitoring cell migration proved that cells migrate significantly toward the three-layered scaffold up to 48 to 72 hours and afterwards start to show a diminished migration rate toward this scaffold.
© 2019 Wiley Periodicals, Inc.

Entities:  

Keywords:  electrospinning; fibroblast migration; multilayered scaffolds; platelet rich plasma; skin tissue engineering

Year:  2019        PMID: 30746766     DOI: 10.1002/jcb.28422

Source DB:  PubMed          Journal:  J Cell Biochem        ISSN: 0730-2312            Impact factor:   4.429


  3 in total

1.  3D Printing of PLLA/Biomineral Composite Bone Tissue Engineering Scaffolds.

Authors:  Fangli Gang; Weilong Ye; Chunyang Ma; Wenting Wang; Yi Xiao; Chang Liu; Xiaodan Sun
Journal:  Materials (Basel)       Date:  2022-06-17       Impact factor: 3.748

2.  Evaluation of in vitro fibroblast migration by electrospun triple-layered PU-CA/gelatin.PRGF/PU-CA scaffold using an AAVS1 targeted EGFP reporter cell line.

Authors:  Forough Shams; Hamideh Moravvej; Simzar Hosseinzadeh; Bahram Kazemi; Masoumrh Rajabibazl; Azam Rahimpour
Journal:  Bioimpacts       Date:  2021-08-30

3.  Optimization of Oligomer Chitosan/Polyvinylpyrrolidone Coating for Enhancing Antibacterial, Hemostatic Effects and Biocompatibility of Nanofibrous Wound Dressing.

Authors:  Vinh Khanh Doan; Chien Minh Tran; Trinh Thi-Phuong Ho; Linh Kim-Khanh Nguyen; Yen Ngoc Nguyen; Ngan Tuan Tang; Tin Dai Luong; Nhi Ngoc-Thao Dang; Nam Minh-Phuong Tran; Binh Thanh Vu; Hoai Thi-Thu Nguyen; Quyen Thuc Huynh; Hien Quoc Nguyen; Chien Mau Dang; Thang Bach Phan; Hanh Thi-Kieu Ta; Viet Hung Pham; Thanh Dinh Le; Toi Van Vo; Hiep Thi Nguyen
Journal:  Polymers (Basel)       Date:  2022-08-29       Impact factor: 4.967

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.