Literature DB >> 30735614

Direct Hot-Injection Synthesis of Lead Halide Perovskite Nanocubes in Acrylic Monomers for Ultrastable and Bright Nanocrystal-Polymer Composite Films.

Jianyu Tong1, Jiajing Wu1, Wei Shen1, Yukang Zhang1, Yao Liu1, Tao Zhang1, Shuming Nie1,2, Zhengtao Deng1.   

Abstract

In recent years, lead halide perovskite nanocrystals (NCs) have attracted significant attention in both fundamental research and commercial applications because of their excellent optical and optoelectrical properties. However, the protective ligands on the surface of the perovskite NCs could be easily removed after the tedious process of centrifugation, separation, and dispersion, which greatly hampers their stability against light, heat, moisture, and oxygen and limits their practical applications. Here, we report a new post-processing free strategy (i.e., without centrifugation, separation, and dispersion process) of using an ultraviolet (UV)-polymerizable acrylic monomer of lauryl methacrylate as the solvent to synthesize CsPbBr3 NCs, and then adding polyester polyurethane acrylate oligomer, monomer (IBOA), and initiator for direct UV polymerization to fabricate NC-polymer composite films. These films exhibited an improved photoluminescence quantum yield (85-90%) than classic NC films (40-50%), which were processed using octadecene (ODE) as the solvent for NC synthesis and postprocessed for UV polymerization. Significantly, the as-fabricated films by post-processing free strategy exhibited excellent photostability against strong Xe lamp illumination; while the other films using classic methods were quickly photodegraded. Meanwhile, these NC-polymer composite films showed good stability against moisture and heating when aging in water at 50 °C for over 200 h. These films, along with K2SiF6:Mn4+ (KSF) phosphor emitters, were used as downconverters for blue light-emitting diodes in liquid-crystal displays with a wide color gamut of 115% in the International Commission on Illumination (CIE) 1931 color space. This work provides a facile and effective strategy for the preparation of ultrastable and bright color-conversion NC films for the development of the next-generation wide color gamut displays.

Entities:  

Keywords:  colloidal nanocrystals; color-conversion optical films; display backlight; lead halide perovskite; photostability

Year:  2019        PMID: 30735614     DOI: 10.1021/acsami.8b20681

Source DB:  PubMed          Journal:  ACS Appl Mater Interfaces        ISSN: 1944-8244            Impact factor:   9.229


  7 in total

1.  Water Triggered Synthesis of Highly Stable and Biocompatible 1D Nanowire, 2D Nanoplatelet, and 3D Nanocube CsPbBr3 Perovskites for Multicolor Two-Photon Cell Imaging.

Authors:  Avijit Pramanik; Shamily Patibandla; Ye Gao; Kaelin Gates; Paresh Chandra Ray
Journal:  JACS Au       Date:  2020-12-09

2.  Wavelength-Tunable and Water-Stable Cesium-Lead-Based All-Bromide Nanocrystal-Polymer Composite Films Using Ultraviolet-Curable Prepolymer as an Anti-Solvent.

Authors:  Wook Hyun Kim; Jungyoun Bae; Kang-Pil Kim; Sungho Woo
Journal:  Polymers (Basel)       Date:  2022-01-19       Impact factor: 4.329

3.  Gel permeation chromatography process for highly oriented Cs3Cu2I5 nanocrystal film.

Authors:  Yu-Hong Cheng; Rikuo Suzuki; Narumi Shinotsuka; Hinako Ebe; Naoaki Oshita; Ryohei Yamakado; Takayuki Chiba; Akito Masuhara; Junji Kido
Journal:  Sci Rep       Date:  2022-03-17       Impact factor: 4.379

4.  Influence of the rate of radiation energy on the charge-carrier kinetics application of all-inorganic CsPbBr3 perovskite nanocrystals.

Authors:  Virendra Kumar; Vandana Nagal; Rahul Kumar; Shubhda Srivastava; Bipin Kumar Gupta; Mahesh Kumar; Aurangzeb Khurram Hafiz; Kedar Singh
Journal:  RSC Adv       Date:  2020-09-24       Impact factor: 4.036

5.  Improving the thermal resistance of fluorescent CsPb(Br,I)3 perovskite quantum dots by surface modification with perfluorodecanoic acid.

Authors:  Yoshiki Iso; Momoko Eri; Risako Hiroyoshi; Kensho Kano; Tetsuhiko Isobe
Journal:  R Soc Open Sci       Date:  2022-08-24       Impact factor: 3.653

6.  Synthesis of two-dimensional phenylethylamine tin-lead halide perovskites with bandgap bending behavior.

Authors:  Shiqi Sui; Jian Zhou; Aifei Wang; Guangcai Hu; Wen Meng; Chuying Wang; Yao Liu; Jiajing Wu; Zhengtao Deng
Journal:  Nanoscale Adv       Date:  2021-05-04

7.  Aromatic nonpolar organogels for efficient and stable perovskite green emitters.

Authors:  Jae-Man Park; Jinwoo Park; Young-Hoon Kim; Huanyu Zhou; Younghoon Lee; Seung Hyeon Jo; Jinwoo Ma; Tae-Woo Lee; Jeong-Yun Sun
Journal:  Nat Commun       Date:  2020-09-15       Impact factor: 14.919

  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.