Anand A Mhatre1, Stephanie Lachell2, Jonathan L Pearlman1. 1. Department of Rehabilitation Science and Technology, School of Health and Rehabilitation Sciences, University of Pittsburgh, Pittsburgh, PA, USA. 2. Department of Mechanical Engineering and Materials Science, Swanson School of Engineering, University of Pittsburgh, Pittsburgh, PA, USA.
Abstract
Introduction: Wheelchair casters fail frequently in the field causing multiple user consequences and wheelchair breakdowns. To inform caster design improvement, there exists no validated tools that can collect caster failures. This need motivated the development of a user-reported, caster failure inspection tool (C-FIT). Methods: To develop C-FIT, a multistep design and testing approach was used which included face validity testing, test-retest reliability testing and expert review. Reliability testing was conducted with two independent cohorts of wheelchair professionals who inspected caster failures physically and online through pictures. The tool was revised based on testing outcomes and expert feedback. For preliminary data collection and evaluating usability, C-FIT was piloted at wheelchair service centers in Scotland, Indonesia and Mexico. Results: Caster failure items reported in the literature were screened to develop the initial list of C-FIT items. Face validity testing conducted through surveys with wheelchair experts (n = 6) provided 14 items for C-FIT inclusion. The test-retest reliability was found to be high for 10 items with physical failure inspections (n = 12). For each of these items, 75% or more participants had substantial to almost perfect agreement scores (κ = 0.6-1.0). Lower reliability scores were found with online failure inspections (n = 11). C-FIT received positive usability feedback from study participants and data collectors in the field. Pilot field data (n = 31) included comprehensive details about failures useful for manufacturers, designers and researchers to improve caster designs.Conclusions: The C-FIT tool developed in this study has substantial reliability and can be used for documenting caster failures at wheelchair service centers.Implications for rehabilitationCollecting data on caster failures is an important first step to inform design improvements and caster quality testing methods.The caster failure inspection tool is a reliable tool that can be used during wheelchair repair and servicing to collect caster failures in a standardized way.The failure data can be used by wheelchair manufacturers, designers, technicians and researchers to develop reliable caster designs. Wheelchair providers can select caster designs based on context of use.
Introduction: Wheelchair casters fail frequently in the field causing multiple user consequences and wheelchair breakdowns. To inform caster design improvement, there exists no validated tools that can collect caster failures. This need motivated the development of a user-reported, caster failure inspection tool (C-FIT). Methods: To develop C-FIT, a multistep design and testing approach was used which included face validity testing, test-retest reliability testing and expert review. Reliability testing was conducted with two independent cohorts of wheelchair professionals who inspected caster failures physically and online through pictures. The tool was revised based on testing outcomes and expert feedback. For preliminary data collection and evaluating usability, C-FIT was piloted at wheelchair service centers in Scotland, Indonesia and Mexico. Results:Caster failure items reported in the literature were screened to develop the initial list of C-FIT items. Face validity testing conducted through surveys with wheelchair experts (n = 6) provided 14 items for C-FIT inclusion. The test-retest reliability was found to be high for 10 items with physical failure inspections (n = 12). For each of these items, 75% or more participants had substantial to almost perfect agreement scores (κ = 0.6-1.0). Lower reliability scores were found with online failure inspections (n = 11). C-FIT received positive usability feedback from study participants and data collectors in the field. Pilot field data (n = 31) included comprehensive details about failures useful for manufacturers, designers and researchers to improve caster designs.Conclusions: The C-FIT tool developed in this study has substantial reliability and can be used for documenting caster failures at wheelchair service centers.Implications for rehabilitationCollecting data on caster failures is an important first step to inform design improvements and caster quality testing methods.The caster failure inspection tool is a reliable tool that can be used during wheelchair repair and servicing to collect caster failures in a standardized way.The failure data can be used by wheelchair manufacturers, designers, technicians and researchers to develop reliable caster designs. Wheelchair providers can select caster designs based on context of use.
Entities:
Keywords:
Casters; face validity; psychometrics; test-retest reliability; tool development; wheelchairs