BACKGROUND: Accurate glioma grading plays an important role in patient treatment. PURPOSE: To investigate the influence of varied texture retrieving models on the efficacy of grading glioma with support vector machine (SVM). STUDY TYPE: Retrospective. POPULATION: In all, 117 glioma patients including 25, 29, and 63 grade II, III, and IV gliomas, respectively, based on WHO 2007. FIELD STRENGTH/SEQUENCE: 3.0T MRI/ T1 WI, T2 fluid-attenuated inversion recovery, contrast enhanced T1 , arterial spinal labeling, diffusion-weighted imaging (0, 30, 50, 100, 200, 300, 500, 800, 1000, 1500, 2000, 3000, and 3500 sec/mm2 ), and dynamic contrast-enhanced. ASSESSMENT: Texture attributes from 30 parametric maps were retrieved using four models, including Global, gray-level co-occurrence matrix (GLCM), gray-level run-length matrix (GLRLM), and gray-level size-zone matrix (GLSZM). Attributes derived from varied models were input into radial basis function SVM (RBF-SVM) combined with attribute selection using SVM-recursive feature elimination (SVM-RFE). The SVM model was trained and established with 80% randomly selected data of each category using 10-fold crossvalidation. The model performance was further tested using the remaining 20% data. STATISTICAL TESTS: Ten-fold crossvalidation was used to validate the model performance. RESULTS: Based on 30 parametric maps, 90, 240, 390, or 390 texture attributes were retrieved using the Global, GLCM, GLRLM, or GLSZM model, respectively. SVM-RFE was able to reduce attribute redundancy as well as improve RBF-SVM performance. Training data were oversampled by applying the Synthetic Minority Oversampling Technique (SMOTE) method to overcome the data imbalance problem; test results were able to further demonstrate the classifying performance of the final models. GLSZM using gray-level 64 was the optimal model to retrieve powerful image texture attributes to produce enough classifying power with an accuracy / area under the curve of 0.760/0.867 for the training and 0.875/0.971 for the independent test. Fifteen attributes were selected with SVM-RFE to provide comparable classifying efficacy. DATA CONCLUSION: When using image textures-based SVM classification of gliomas, the GLSZM model in combination with gray-level 64 and attribute selection may be an optimized solution. LEVEL OF EVIDENCE: 2 Technical Efficacy: Stage 2 J. Magn. Reson. Imaging 2019;49:1263-1274.
BACKGROUND: Accurate glioma grading plays an important role in patient treatment. PURPOSE: To investigate the influence of varied texture retrieving models on the efficacy of grading glioma with support vector machine (SVM). STUDY TYPE: Retrospective. POPULATION: In all, 117 gliomapatients including 25, 29, and 63 grade II, III, and IV gliomas, respectively, based on WHO 2007. FIELD STRENGTH/SEQUENCE: 3.0T MRI/ T1 WI, T2 fluid-attenuated inversion recovery, contrast enhanced T1 , arterial spinal labeling, diffusion-weighted imaging (0, 30, 50, 100, 200, 300, 500, 800, 1000, 1500, 2000, 3000, and 3500 sec/mm2 ), and dynamic contrast-enhanced. ASSESSMENT: Texture attributes from 30 parametric maps were retrieved using four models, including Global, gray-level co-occurrence matrix (GLCM), gray-level run-length matrix (GLRLM), and gray-level size-zone matrix (GLSZM). Attributes derived from varied models were input into radial basis function SVM (RBF-SVM) combined with attribute selection using SVM-recursive feature elimination (SVM-RFE). The SVM model was trained and established with 80% randomly selected data of each category using 10-fold crossvalidation. The model performance was further tested using the remaining 20% data. STATISTICAL TESTS: Ten-fold crossvalidation was used to validate the model performance. RESULTS: Based on 30 parametric maps, 90, 240, 390, or 390 texture attributes were retrieved using the Global, GLCM, GLRLM, or GLSZM model, respectively. SVM-RFE was able to reduce attribute redundancy as well as improve RBF-SVM performance. Training data were oversampled by applying the Synthetic Minority Oversampling Technique (SMOTE) method to overcome the data imbalance problem; test results were able to further demonstrate the classifying performance of the final models. GLSZM using gray-level 64 was the optimal model to retrieve powerful image texture attributes to produce enough classifying power with an accuracy / area under the curve of 0.760/0.867 for the training and 0.875/0.971 for the independent test. Fifteen attributes were selected with SVM-RFE to provide comparable classifying efficacy. DATA CONCLUSION: When using image textures-based SVM classification of gliomas, the GLSZM model in combination with gray-level 64 and attribute selection may be an optimized solution. LEVEL OF EVIDENCE: 2 Technical Efficacy: Stage 2 J. Magn. Reson. Imaging 2019;49:1263-1274.
Authors: Tamara Ius; Edoardo Mazzucchi; Barbara Tomasino; Giada Pauletto; Giovanni Sabatino; Giuseppe Maria Della Pepa; Giuseppe La Rocca; Claudio Battistella; Alessandro Olivi; Miran Skrap Journal: Sci Rep Date: 2021-05-11 Impact factor: 4.379