Literature DB >> 30622065

In-vehicle airborne fine and ultra-fine particulate matter exposure: The impact of leading vehicle emissions.

Davide Campagnolo1, Andrea Cattaneo2, Leonardo Corbella2, Francesca Borghi2, Luca Del Buono2, Sabrina Rovelli2, Andrea Spinazzé2, Domenico M Cavallo2.   

Abstract

Airborne particulate matter (PM) concentrations inside vehicle cabins are often extremely high compared to background levels. The present study was motivated by the fact that in the last few decades, the implementation of new emission standards has led to the reduction of vehicle particle emissions. This study addresses for the first time the relationship between leading vehicle (LV) emissions and in-cabin PM exposure levels in the immediately following vehicle (henceforth called the study vehicle - SV), with particular emphasis on the role of the LV's emission reduction technologies (e.g., diesel particulate filter-DPF) as an effective risk management measure. The study was performed using an instrumented study vehicle (always to be considered as the following vehicle) on a 26-km fixed route where 10 repeated tests were conducted during 60-minute trips. On-line monitoring of the fine 0.3-1 μm and 1-2.5 μm (PM0.3-1 and PM1-2.5) and ultra-fine particle (UFP) concentrations was performed inside the SV's car cabin with fixed ventilation settings (i.e., windows closed, air conditioning off, and recirculation fan off). Simultaneously, the license plate numbers of the LVs along the route were recorded to retrieve information pertaining to their fuel type and Euro emission standard category. The results clearly showed that the in-cabin PM levels were significantly affected by the LV's Euro emission standard. Regarding petrol-fuelled LVs, the median in-cabin particle exposure levels were statistically lower (e.g., -34% for PM0.3-1) when following vehicles with stricter emission standards (in particular, Euro 6) than when following a low-emission standard vehicle (i.e., Euro 0-2). Concerning diesel-fuelled LVs, a strong and significant decrease in the in-cabin median exposure levels (up to -62%, -44%, and -48% for UFPs, PM0.3-1, and PM1-2.5, respectively) was observed for recent-emission standards LVs (i.e., Euro 5-6) with respect to older-emission standard LVs (i.e., Euro 0-4). A specific analysis revealed that the in-cabin median exposure concentrations of PM were highly and significantly reduced by DPF-equipped LVs. For UFPs, this resulted in a 47% reduction compared to diesel-fuelled (non-DPF) LVs. For PM0.3-1, an approximate 80% reduction was observed compared to both petrol-fuelled and diesel-fuelled (non-DPF) LVs. For PM1-2.5, an approximate 38% reduction was observed compared to petrol-fuelled LVs and a 46% reduction compared to non-DPF LVs.
Copyright © 2019. Published by Elsevier Ltd.

Entities:  

Keywords:  Diesel particulate filter; Emission standard levels; In-vehicle air quality; Individual exposure; Particle concentrations; Vehicle exhaust emissions

Mesh:

Substances:

Year:  2019        PMID: 30622065     DOI: 10.1016/j.envint.2018.12.020

Source DB:  PubMed          Journal:  Environ Int        ISSN: 0160-4120            Impact factor:   9.621


  3 in total

Review 1.  Indoor Air Pollution in Cars: An Update on Novel Insights.

Authors:  Nicole Zulauf; Janis Dröge; Doris Klingelhöfer; Markus Braun; Gerhard M Oremek; David A Groneberg
Journal:  Int J Environ Res Public Health       Date:  2019-07-09       Impact factor: 3.390

2.  Estimation of the Inhaled Dose of Airborne Pollutants during Commuting: Case Study and Application for the General Population.

Authors:  Francesca Borghi; Giacomo Fanti; Andrea Cattaneo; Davide Campagnolo; Sabrina Rovelli; Marta Keller; Andrea Spinazzè; Domenico Maria Cavallo
Journal:  Int J Environ Res Public Health       Date:  2020-08-20       Impact factor: 3.390

3.  TAPaC-tobacco-associated particulate matter emissions inside a car cabin: establishment of a new measuring platform.

Authors:  Lukas Pitten; Dörthe Brüggmann; Janis Dröge; Markus Braun; David A Groneberg
Journal:  J Occup Med Toxicol       Date:  2022-08-24       Impact factor: 2.862

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.