Literature DB >> 30529984

Bacterial leakage and bending moments of screw-retained, composite-veneered PEEK implant crowns.

Andreas Wachtel1, Tycho Zimmermann1, Mona Sütel1, Ufuk Adali1, Mohamad Abou-Emara2, Wolf-Dieter Müller1, Sven Mühlemann3, Andreas Dominik Schwitalla4.   

Abstract

Due to its elastic modulus close to bone, the high-performance material PEEK (polyetheretherketone) represents an interesting material for implant-supported dental prostheses. Besides a damping effect of masticatory forces, it might have a sealing effect against bacterial leakage of the implant-abutment interface (IAI). So far, PEEK has only been used for provisional implant crowns. Therefore, the aim of the study was the evaluation of the bacterial tightness of screw-retained PEEK crowns on titanium implants with conical IAI during masticatory simulation and subsequent bending moment testing. Ten screw-retained implant crowns in the shape of an upper central incisor consisting of a PEEK crown framework veneered with composite were connected to NobelActive RP titanium implants (4.3 × 11.5 mm, Nobel Biocare AB, Göteborg, Sweden) with a tightening torque of 15 Ncm. Prior to tightening, the interior of the implant was inoculated with a bacterial suspension of Enterococcus faecium. The specimens were overmolded with indicating agar (Kanamycin-Aesculin-Azid-Agar (KAAA), Oxoid Limited, Basingstoke United Kingdom), that turns black in contact with E. faecium. The specimens were subjected to a cyclic masticatory simulation whereby a force of 50 N cm was applied at an angle of 30° to the implant axis for 1.2 million cycles. Afterwards, the specimens were subjected to a static loading test according to ISO 14801:2007 to determine the bending moment. During masticatory simulation neither a loosening of the implant screws nor any damage to the veneer or the PEEK framework occurred. Furthermore, no bacterial leakage could be observed in any of the specimens. The average maximum bending moment was measured at 352.13 ± 48.96 N cm. Regarding masticatory forces, PEEK implant crowns seem to be applicable as definitive implant-supported restorations. Furthermore, the bacterial tightness of the IAI of screw-retained one-piece PEEK implant crowns is advantageous compared to superstructures of conventional materials. Further studies are necessary to substantiate the clinical significance of these findings.
Copyright © 2018 Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Bacterial leakage; Conical implant-abutment connection; Dental implant; Implant crown; Morse taper; PEEK

Year:  2018        PMID: 30529984     DOI: 10.1016/j.jmbbm.2018.11.027

Source DB:  PubMed          Journal:  J Mech Behav Biomed Mater        ISSN: 1878-0180


  4 in total

Review 1.  Review on Development and Dental Applications of Polyetheretherketone-Based Biomaterials and Restorations.

Authors:  Ludan Qin; Shuo Yao; Jiaxin Zhao; Chuanjian Zhou; Thomas W Oates; Michael D Weir; Junling Wu; Hockin H K Xu
Journal:  Materials (Basel)       Date:  2021-01-15       Impact factor: 3.623

2.  PEEK Biomaterial in Long-Term Provisional Implant Restorations: A Review.

Authors:  Suphachai Suphangul; Dinesh Rokaya; Chatruethai Kanchanasobhana; Pimduen Rungsiyakull; Pisaisit Chaijareenont
Journal:  J Funct Biomater       Date:  2022-03-22

Review 3.  The use of PEEK in digital prosthodontics: A narrative review.

Authors:  Ioannis Papathanasiou; Phophi Kamposiora; George Papavasiliou; Marco Ferrari
Journal:  BMC Oral Health       Date:  2020-08-02       Impact factor: 2.757

4.  Clinical evaluation of performance of single unit polyetheretherketone crown restoration-a pilot study.

Authors:  Kavishma Sulaya; Satyabodh S Guttal
Journal:  J Indian Prosthodont Soc       Date:  2020-01-27
  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.