Literature DB >> 30509588

E-waste in the international context - A review of trade flows, regulations, hazards, waste management strategies and technologies for value recovery.

I M S K Ilankoon1, Yousef Ghorbani2, Meng Nan Chong3, Gamini Herath4, Thandazile Moyo5, Jochen Petersen5.   

Abstract

E-waste, or waste generated from electrical and electronic equipment, is considered as one of the fastest-growing waste categories, growing at a rate of 3-5% per year in the world. In 2016, 44.7 million tonnes of e-waste were generated in the world, which is equivalent to 6.1 kg for each person. E-waste is classified as a hazardous waste, but unlike other categories, e-waste also has significant potential for value recovery. As a result it is traded significantly between the developed and developing world, both as waste for disposal and as a resource for metal recovery. Only 20% of global e-waste in 2016 was properly recycled or disposed of, with the fate of the remaining 80% undocumented - likely to be dumped, traded or recycled under inferior conditions. This review paper provides an overview of the global e-waste resource and identifies the major challenges in the sector in terms of generation, global trade and waste management strategies. It lists the specific hazards associated with this type of waste that need to be taken into account in its management and includes a detailed overview of technologies employed or proposed for the recovery of value from e-waste. On the basis of this overview the paper identifies future directions for effective e-waste processing towards sustainable waste/resource management. It becomes clear that there is a strong divide between developed and developing countries with regard to this sector. While value recovery is practiced in centralised facilities employing advanced technologies in a highly regulated industrial environment in the developed world, in the developing world such recovery is practiced in a largely unregulated artisanal industry employing simplistic, labour intensive and environmentally hazardous approaches. Thus value is generated safely in the hi-tech environment of the developed world, whereas environmental burdens associated with exported waste and residual waste from simplistic processing remain largely in developing countries. It is argued that given the breadth of available technologies, a more systematic evaluation of the entire e-waste value chain needs to be conducted with a view to establishing integrated management of this resource (in terms of well-regulated value recovery and final residue disposal) at the appropriately local rather than global scale.
Copyright © 2018 Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  E-waste recycling; Environmental pollution; Hydrometallurgy; Pyrometallurgy; Trans-boundary movement of e-waste; Waste management

Mesh:

Substances:

Year:  2018        PMID: 30509588     DOI: 10.1016/j.wasman.2018.10.018

Source DB:  PubMed          Journal:  Waste Manag        ISSN: 0956-053X            Impact factor:   7.145


  14 in total

1.  Past and emerging topics related to electronic waste management: top countries, trends, and perspectives.

Authors:  Daniel Fernandes Andrade; João Paulo Romanelli; Edenir Rodrigues Pereira-Filho
Journal:  Environ Sci Pollut Res Int       Date:  2019-04-18       Impact factor: 4.223

Review 2.  Levels and distribution of polybrominated diphenyl ethers in humans and environmental compartments: a comprehensive review of the last five years of research.

Authors:  Darija Klinčić; Marija Dvoršćak; Karla Jagić; Gordana Mendaš; Snježana Herceg Romanić
Journal:  Environ Sci Pollut Res Int       Date:  2020-01-13       Impact factor: 4.223

3.  Managing e-waste from a closed-loop lifecycle perspective: China's challenges and fund policy redesign.

Authors:  Tingting Tian; Guangfu Liu; Hussein Yasemi; Yang Liu
Journal:  Environ Sci Pollut Res Int       Date:  2022-02-19       Impact factor: 5.190

4.  Intermediary organisations in collaborative environmental governance: evidence of the EU-funded LIFE sub-programme for the environment (LIFE-ENV).

Authors:  Elena Pisani; Elena Andriollo; Mauro Masiero; Laura Secco
Journal:  Heliyon       Date:  2020-07-16

5.  WEEE Treatment in Developing Countries: Environmental Pollution and Health Consequences-An Overview.

Authors:  Mentore Vaccari; Giovanni Vinti; Alessandra Cesaro; Vincenzo Belgiorno; Stefan Salhofer; Maria Isabel Dias; Aleksander Jandric
Journal:  Int J Environ Res Public Health       Date:  2019-05-07       Impact factor: 3.390

Review 6.  Circular Materials and Circular Design-Review on Challenges Towards Sustainable Manufacturing and Recycling.

Authors:  Ludovic F Dumée
Journal:  Circ Econ Sustain       Date:  2021-06-26

7.  Development of a course based on BEAM robots to enhance STEM learning in electrical, electronic, and mechanical domains.

Authors:  Carlos Boya-Lara; Doris Saavedra; Aaron Fehrenbach; Angel Marquez-Araque
Journal:  Int J Educ Technol High Educ       Date:  2022-02-03

Review 8.  Reverse logistics research of municipal hazardous waste: a literature review.

Authors:  Chunlin Xin; Jie Wang; Ziping Wang; Chia-Huei Wu; Muhammad Nawaz; Sang-Bing Tsai
Journal:  Environ Dev Sustain       Date:  2021-06-03       Impact factor: 3.219

Review 9.  Blood Pressure Sensors: Materials, Fabrication Methods, Performance Evaluations and Future Perspectives.

Authors:  Ahmed Al-Qatatsheh; Yosry Morsi; Ali Zavabeti; Ali Zolfagharian; Nisa Salim; Abbas Z Kouzani; Bobak Mosadegh; Saleh Gharaie
Journal:  Sensors (Basel)       Date:  2020-08-11       Impact factor: 3.576

10.  Ecotoxicity of Plastics from Informal Waste Electric and Electronic Treatment and Recycling.

Authors:  Maria Angela Butturi; Simona Marinelli; Rita Gamberini; Bianca Rimini
Journal:  Toxics       Date:  2020-11-08
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.