Erratum: Zalameda, J. et al. Detection and Characterization of Damage in Quasi-Static Loaded Composite Structures using Passive Thermography. Sensors 2018, 18, 3562.

The authors wish to correct Table 3 in their paper published in Sensors [...].

The authors wish to correct Table 3 in their paper published in Sensors [1], doi:10.3390/s18103562, https://www.mdpi.com/1424-8220/18/10/3562. The following corrected table should be used with incorrect references removed from original. The corrected table does not change the scientific results. The correct references are used in the original manuscript. The manuscript will be updated and the original will remain online on the article web page, with a reference to this Erratum.

Table 3

Model values.

Model Variable	Value
l (thickness of flange + skin)	0.46 cm
Instantaneous Heat Flux	1.0 Watt/cm2
Flaw Position	4.3 to 6.3 cm
L (Slab Width)	10.2 cm
α_z (through thickness thermal diffusivity)	0.0042 cm2/s
α_x (lateral thermal diffusivity)	0.021 cm2/s
K (thermal conductivity)	0.0045 W/cm/K
N (Discrete positions in x)	160