Literature DB >> 30411756

New applications of the mathematical model of a permeation passive sampler: prediction of the effective uptake rate and storage stability.

Faten Salim1, Tadeusz Górecki, Marios Ioannidis.   

Abstract

As the applications of passive sampling in environmental analysis are increasing, it is crucial to ensure that the methods applied in the measurement of pollutant concentrations provide sufficient accuracy in compliance with existing regulations. Additionally, as with any sampling method in an analytical process, sample integrity is essential for accurate determination of contaminants and their concentrations. In a recent study, a mathematical model was developed to describe the sampling process in permeation passive samplers. The model was able to predict the significance of potential uptake rate changes during sampling. The model also predicted the distribution of the sampled analyte within the different compartments of the sampler. In the present work, the model was extended to include two practical applications. In the first part, a novel method allowing prediction of the effective uptake rate of the sampler is presented. The method accounts for changes in the uptake rate during the exposure time caused by resistance to mass transfer in the sorbent bed, allowing accurate calculation of the time weighted average concentrations. The method was proven to be successful through experimental verification that involved sampling toluene and trichloroethylene using the Waterloo Membrane Sampler (WMS). In the second part, the post-sampling storage period of analytes in the WMS was evaluated. It was found both theoretically and experimentally that analyzing the sorbent only is sufficient to quantify the analytes collected, as the amount retained in the remaining compartments of the sampler (PDMS membrane, air inside the sampler and the storage vial) is negligible after sampling. The amounts of analytes collected by the sorbent were stable over up to three-weeks of storage at room temperature. These findings establish confidence in the use of the WMS for sampling Volatile Organic Compounds (VOCs).

Entities:  

Mesh:

Substances:

Year:  2019        PMID: 30411756     DOI: 10.1039/c8em00397a

Source DB:  PubMed          Journal:  Environ Sci Process Impacts        ISSN: 2050-7887            Impact factor:   4.238


  1 in total

1.  Superior Monitoring of Chemical Exposure Using Nanoconfinement Technology.

Authors:  Allen Apblett; Nicholas Materer; Evgueni Kadossov; Shoaib Shaikh
Journal:  Mil Med       Date:  2021-01-25       Impact factor: 1.437

  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.