Literature DB >> 30357874

Ultrasonic sensor concept to fit a ventricular assist device cannula evaluated using geometrically accurate heart phantoms.

Seraina Anne Dual1, Jan Michael Zimmermann1, Jürg Neuenschwander2, Nicholas Heinrich Cohrs3, Natalia Solowjowa4, Wendelin Jan Stark3, Mirko Meboldt1, Marianne Schmid Daners1.   

Abstract

Future left ventricular assist devices (LVADs) are expected to respond to the physiologic need of patients; however, they still lack reliable pressure or volume sensors for feedback control. In the clinic, echocardiography systems are routinely used to measure left ventricular (LV) volume. Until now, echocardiography in this form was never integrated in LVADs due to its computational complexity. The aim of this study was to demonstrate the applicability of a simplified ultrasonic sensor to fit an LVAD cannula and to show the achievable accuracy in vitro. Our approach requires only two ultrasonic transducers because we estimated the LV volume with the LV end-diastolic diameter commonly used in clinical assessments. In order to optimize the accuracy, we assessed the optimal design parameters considering over 50 orientations of the two ultrasonic transducers. A test bench was equipped with five talcum-infused silicone heart phantoms, in which the intra-ventricular surface replicated papillary muscles and trabeculae carnae. The end-diastolic LV filling volumes of the five heart phantoms ranged from 180 to 480 mL. This reference volume was altered by ±40 mL with a syringe pump. Based on the calibrated measurements acquired by the two ultrasonic transducers, the LV volume was estimated well. However, the accuracies obtained are strongly dependent on the choice of the design parameters. Orientations toward the septum perform better, as they interfere less with the papillary muscles. The optimized design is valid for all hearts. Considering this, the Bland-Altman analysis reports the LV volume accuracy as a bias of ±10% and limits of agreement of 0%-40% in all but the smallest heart. The simplicity of traditional echocardiography systems was reduced by two orders of magnitude in technical complexity, while achieving a comparable accuracy to 2D echocardiography requiring a calibration of absolute volume only. Hence, our approach exploits the established benefits of echocardiography and makes them applicable as an LV volume sensor for LVADs.
© 2018 International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.

Entities:  

Keywords:  3D printing; cardiac phantom; hemodynamic monitoring; implantable; intra-cardiac echocardiography; trabeculae; ultrasound; ventricular assist device; volume sensor

Mesh:

Year:  2018        PMID: 30357874     DOI: 10.1111/aor.13379

Source DB:  PubMed          Journal:  Artif Organs        ISSN: 0160-564X            Impact factor:   3.094


  4 in total

Review 1.  The left ventricular assist device as a patient monitoring system.

Authors:  Francesco Moscato; Christoph Gross; Martin Maw; Thomas Schlöglhofer; Marcus Granegger; Daniel Zimpfer; Heinrich Schima
Journal:  Ann Cardiothorac Surg       Date:  2021-03

2.  3D Printed Heart Models Illustrating Myocardial Perfusion Territories to Augment Echocardiography and Electrocardiography Interpretation.

Authors:  Geoffroy P J C Noël; Weimeng Ding; Peter Steinmetz
Journal:  Med Sci Educ       Date:  2021-01-08

3.  Real-Time Ventricular Volume Measured Using the Intracardiac Electromyogram.

Authors:  Marianne Schmid Daners; Sophie Hall; Simon Sündermann; Nikola Cesarovic; Mareike Kron; Volkmar Falk; Christoph Starck; Mirko Meboldt; Seraina A Dual
Journal:  ASAIO J       Date:  2021-12-01       Impact factor: 3.826

4.  Improved Estimation of Left Ventricular Volume from Electric Field Modeling.

Authors:  Leonie Korn; Stephan Dahlmanns; Steffen Leonhardt; Marian Walter
Journal:  J Electr Bioimpedance       Date:  2021-12-27
  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.