Literature DB >> 30350007

Transcending Dimensions: a Comparative Analysis of Cloaca Imaging in Advancing the Surgeon's Understanding of Complex Anatomy.

Alessandra C Gasior1, Carlos Reck2, Victoria Lane2, Richard J Wood2, Jeremy Patterson3, Robert Strouse3, Simon Lin3, Jennifer Cooper3, D Gregory Bates2, Marc A Levitt2.   

Abstract

Surgeons have a steep learning capacity to understand 2-D images provided by conventional cloacagrams. Imaging advances now allow for 3-D reconstruction and 3-D models; but no evaluation of the value of these techniques exists in the literature. Therefore, we sought to determine if advances in 3-D imaging would benefit surgeons, lead to accelerated learning, and improve understanding for operative planning of a cloaca reconstruction. Questionnaires were used to assess the understanding of 2-D and 3-D images by pediatric surgical faculty and trainees. For the same case of a cloacal malformation, a 2D contrast study cloacagram, a 3D model rotatable CT scan reconstruction, a software enhanced 3D video animation (which allowed the observer to manipulate the structure in any orientation), and a printed physical 3D cloaca model that could be held in the observer's hand were employed. Logistic mixed effect models assessed whether the proportion of questions about the case that were answered correctly differed by imaging modality, and whether the proportion answered correctly differed between trainee and attending surgeons for any particular modality. Twenty-nine pediatric surgery trainees (27 pediatric general surgery and 2 pediatric urology surgery trainees) and 30 pediatric surgery and urology faculty participated. For trainees, the percentage of questions answered correctly was: 2-D 10.5%, 3-D PACS 46.7%, 3-D Enhanced 67.1%, and 3-D Printed 73.8%. For faculty, the total percentage of questions answered correctly was: 2-D 22.2%, 3-D PACS 54.8%, 3D Enhanced 66.2%, and 3-D printed 74.0%. The differences in rates of correctness across all four modalities were significant in both fellows and attendings (p < 0.001), with performance being lowest for the 2-D modality, and with increasing percentage of correct answers with each subsequent modality. The difference between trainees and attendings in correctness rate was significant only for the 2-D modality, with attendings answering correctly more often. The 2-D cloacagram, as the least complex model, was the most difficult to interpret. The more complex the modality, the more correct were the responses obtained from both groups. Trainees and attendings had similar levels of correct answers and understanding of the cloacagram for the more advanced modalities. Mental visualization skills of anatomy and complex 3-D spatial arrangements traditionally have taken years of experience to master. Now with novel surgical education resources of a 3-D cloacagram, a more quickly advancing skill is possible.

Entities:  

Keywords:  3D printing; Anorectal malformation; Cloaca; Surgical education

Mesh:

Year:  2019        PMID: 30350007      PMCID: PMC6737109          DOI: 10.1007/s10278-018-0139-y

Source DB:  PubMed          Journal:  J Digit Imaging        ISSN: 0897-1889            Impact factor:   4.056


  11 in total

1.  The cloacal malformation: radiologic findings and imaging recommendations.

Authors:  D Jaramillo; R L Lebowitz; W H Hendren
Journal:  Radiology       Date:  1990-11       Impact factor: 11.105

2.  Pitfalls in the management of newborn cloacas.

Authors:  Marc A Levitt; Alberto Peña
Journal:  Pediatr Surg Int       Date:  2005-02-22       Impact factor: 1.827

3.  Medical Applications for 3D Printing: Current and Projected Uses.

Authors:  C Lee Ventola
Journal:  P T       Date:  2014-10

4.  Three-dimensional aortic aneurysm model and endovascular repair: an educational tool for surgical trainees.

Authors:  Chumpon Wilasrusmee; Jesada Suvikrom; Jackrit Suthakorn; Panuwat Lertsithichai; Kriskrai Sitthiseriprapip; Napaphat Proprom; Dilip S Kittur
Journal:  Int J Angiol       Date:  2008

5.  Prenatal diagnosis of cloacal anomalies.

Authors:  S Warne; L S Chitty; D T Wilcox
Journal:  BJU Int       Date:  2002-01       Impact factor: 5.588

Review 6.  Three dimensional printing: A review on the utility within medicine and otolaryngology.

Authors:  Rachel Kaye; Todd Goldstein; David Zeltsman; Daniel A Grande; Lee P Smith
Journal:  Int J Pediatr Otorhinolaryngol       Date:  2016-08-12       Impact factor: 1.675

7.  Transfemoral transcatheter aortic valve implantation in the presence of a mechanical mitral valve prosthesis using a dedicated TAVI guidewire: utility of a patient-specific three-dimensional heart model.

Authors:  Takanari Fujita; Naritatsu Saito; Kenji Minakata; Masao Imai; Kazuhiro Yamazaki; Takeshi Kimura
Journal:  Cardiovasc Interv Ther       Date:  2016-08-27

8.  Development of an Innovative 3D Printed Rigid Bronchoscopy Training Model.

Authors:  Jehad Al-Ramahi; Huiping Luo; Rui Fang; Adriana Chou; Jack Jiang; Tony Kille
Journal:  Ann Otol Rhinol Laryngol       Date:  2016-09-07       Impact factor: 1.547

9.  Understanding complex systems: lessons from Auzoux's and von Hagens's anatomical models.

Authors:  Antonio G Valdecasas; Ana M Correas; Carmen R Guerrero; Jesús Juez
Journal:  J Biosci       Date:  2009-12       Impact factor: 1.826

10.  3D-Printing in Congenital Cardiology: From Flatland to Spaceland.

Authors:  Sébastien Deferm; Bart Meyns; Dirk Vlasselaers; Werner Budts
Journal:  J Clin Imaging Sci       Date:  2016-03-30
View more
  2 in total

1.  Role of 3D printing technology in paediatric teaching and training: a systematic review.

Authors:  Ashar Asif; Elgin Lee; Massimo Caputo; Giovanni Biglino; Andrew Ian Underwood Shearn
Journal:  BMJ Paediatr Open       Date:  2021-12

Review 2.  Fluorescence-Guided Surgery and Novel Innovative Technologies for Improved Visualization in Pediatric Urology.

Authors:  Irene Paraboschi; Guglielmo Mantica; Dario Guido Minoli; Erika Adalgisa De Marco; Michele Gnech; Carolina Bebi; Gianantonio Manzoni; Alfredo Berrettini
Journal:  Int J Environ Res Public Health       Date:  2022-09-06       Impact factor: 4.614

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.