Literature DB >> 30318157

Characteristics and mechanisms of cadmium adsorption onto biogenic aragonite shells-derived biosorbent: Batch and column studies.

Huu Tap Van1, Lan Huong Nguyen2, Van Dang Nguyen3, Xuan Hoan Nguyen2, Thanh Hai Nguyen4, Tien Vinh Nguyen5, Saravanamuth Vigneswaran5, Jörg Rinklebe6, Hai Nguyen Tran7.   

Abstract

Calcium carbonate (CaCO3)-enriched biomaterial derived from freshwater mussel shells (FMS) was used as a non-porous biosorbent to explore the characteristics and mechanisms of cadmium adsorption in aqueous solution. The adsorption mechanism was proposed by comparing the FMS properties before and after adsorption alongside various adsorption studies. The FMS biosorbent was characterized using nitrogen adsorption/desorption isotherm, X-ray diffraction, scanning electron microscopy with energy dispersive spectroscopy, Fourier-transform infrared spectroscopy, and point of zero charge. The results of batch experiments indicated that FMS possessed an excellent affinity to Cd(II) ions within solutions pH higher than 4.0. An increase in ionic strength resulted in a significant decrease in the amount of Cd(II) adsorbed onto FMS. Kinetic study demonstrated that the adsorption process quickly reached equilibrium at approximately 60 min. The FMS biosorbent exhibited the Langmuir maximum adsorption capacity as follows: 18.2 mg/g at 10 °C < 26.0 mg/g at 30 °C < 28.6 mg/g at 50 °C. The Cd(II) adsorption process was irreversible, spontaneous (-ΔG°), endothermic (+ΔH°), and more random (+ΔS°). Selective order (mmol/g) of metal cations followed as Pb2+ > Cd2+ > Cu2+ > Cr3+ > Zn2+. For column experiments, the highest Thomas adsorption capacity (7.86 mg/g) was achieved at a flow rate (9 mL/min), initial Cd(II) concentration (10 mg/L), and bed height (5 cm). The Cd(II) removal by FMS was regarded as non-activated chemisorption that occurred very rapidly (even at a low temperature) with a low magnitude of activation energy. Primary adsorption mechanism was surface precipitation. Cadmium precipitated in the primary (Cd,Ca)CO3 form with a calcite-type structure on the FMS surface. A crust of rhombohedral crystals on the substrate was observed by SEM. Freshwater mussel shells have the potential as a renewable adsorbent to remove cadmium from water.
Copyright © 2018 Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  (Cd,Ca)CO(3); Adsorption mechanism; Cadmium; Freshwater mussel shells; Non-activated chemisorption; Surface precipitation

Mesh:

Substances:

Year:  2018        PMID: 30318157     DOI: 10.1016/j.jenvman.2018.09.079

Source DB:  PubMed          Journal:  J Environ Manage        ISSN: 0301-4797            Impact factor:   6.789


  6 in total

1.  Adsorption kinetics and isotherms of binary metal ion aqueous solution using untreated venus shell.

Authors:  Attaso Khamwichit; Wipawee Dechapanya; Wipada Dechapanya
Journal:  Heliyon       Date:  2022-06-02

2.  Synthesis optimisation and characterisation of chitosan-calcite adsorbent from fishery-food waste for phosphorus removal.

Authors:  Sabolc Pap; Caroline Kirk; Barbara Bremner; Maja Turk Sekulic; Stuart W Gibb; Snezana Maletic; Mark A Taggart
Journal:  Environ Sci Pollut Res Int       Date:  2020-01-11       Impact factor: 4.223

3.  Heavy metal removal from aqueous systems using hydroxyapatite nanocrystals derived from clam shells.

Authors:  Dariela Núñez; Jon Ander Serrano; Aritz Mancisidor; Elizabeth Elgueta; Kokkarachedu Varaprasad; Patricio Oyarzún; Rodrigo Cáceres; Walther Ide; Bernabé L Rivas
Journal:  RSC Adv       Date:  2019-07-24       Impact factor: 3.361

4.  Hydrogels derived from galactoglucomannan hemicellulose with inorganic contaminant removal properties.

Authors:  Leonidas Encina; Elizabeth Elgueta; Bernabé L Rivas; Miguel Pereira; Felipe Sanhueza
Journal:  RSC Adv       Date:  2021-11-08       Impact factor: 4.036

5.  Adsorption of Heavy Metals Ions from Mining Metallurgical Tailings Leachate Using a Shell-Based Adsorbent: Characterization, Kinetics and Isotherm Studies.

Authors:  Begoña Fernández Pérez; Julia Ayala Espina; María de Los Ángeles Fernández González
Journal:  Materials (Basel)       Date:  2022-08-02       Impact factor: 3.748

6.  Tight sorption of arsenic, cadmium, mercury, and lead by edible activated carbon and acid-processed montmorillonite clay.

Authors:  Meichen Wang; Gopal Bera; Kusumica Mitra; Terry L Wade; Anthony H Knap; Timothy D Phillips
Journal:  Environ Sci Pollut Res Int       Date:  2020-10-02       Impact factor: 4.223

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.