The biodegradative effect of Tenebrio molitor Linnaeus larvae on vulcanized SBR and tire crumb.

The overall world consumption rate of rubber tends to increase by an average of 2.8% per year in the period between 2017 and 2025. Rubber residues represent a severe problem to both health and environment due to their cross-linked structure that offers a prolonged degradation rate. A good solution to eliminate this problem is recycling and recovery, aiming at the production of new materials. The tire crumb can be recycled by chemical/biological recovery, where the elastomer is devulcanized, or by physical recovery, where the three-dimensional network is transformed into small fragments. In this study, we investigated the bio-degradation effect caused by Mealworms (the larvae of Tenebrio molitor Linnaeus) on vulcanized SBR-rubber and tire crumb as a desulphurization method. The surface modifications of both rubbers were studied by instrumental techniques: FTIR-ATR, TGA, XRD, and SEM. The cross-linking degree of the rubber was determined via circular condensation method. The obtained results show that the Tenebrio molitor could survive after three weeks of direct contact with SBR-rubber and tire crumb as the only alimentation. There was a declining effect of cross-linking degree by increasing the contact time between the rubbers and larvae. The FTIR results indicate surface/chemical modifications of the rubbers and the SEM results show the free sulfur after it was released in the form of sulfur flower-like. Also, the TGA results highlight a difference in the degrading behavior and residues of the treated and non-treated rubbers. Therefore, the reported results were promising, demonstrating the biodegradation effect caused by the Tenebrio molitor mealworms, highlighting an alternative and natural mean of degrading vulcanized rubber residues.