Silver-Catalyzed Regio- and Stereoselective Formal Carbene Insertion into Unstrained C-C σ-Bonds of 1,3-Dicarbonyls.

A regio- and stereoselective silver-catalyzed formal carbene insertion into 1,3-dicarbonyls has been developed, using N-nosylhydrazones as diazo surrogates. Two new C-C bonds are constructed at the carbenic carbon center through the selective cleavage of the C-C(=O) σ-bond of acyclic 1,3-dicarbonyls, enabling the preparation of various synthetically useful polysubstituted γ-diketones, γ-ketoesters, and γ-ketoamides in high yields. The in situ formation of a donor-acceptor cyclopropane, via reaction of the enolate of the 1,3-dicarbonyl with an electrophilic silver carbenoid, is proposed as a key process in the catalytic cycle.

Introduction

Selective one-carbon insertion into C−C σ-bonds is a highly desirable strategy to homologate organic molecules (Candeias et al., 2016). However, this process is, in general, highly challenging, due to the difficulty of cleaving the relatively inert C−C σ-bonds (Murakami et al., 2016, Fumagalli et al., 2017, Souillart and Cramer, 2015, Chen et al., 2014). Aside from reactions in strained systems, very few efficient strategies are available (Chen et al., 2014); among these, the homologation of n class="Chemical">ketones with diazo compounds represents one of the most explored strategies, whereby the diazo compound acts as ambiphilic species in sequential nucleophilic addition/1,2-rearrangement cascades (Candeias et al., 2016, Moebius and Kingsbury, 2009, Hashimoto et al., 2009, Hashimoto et al., 2011, Li et al., 2013) (Figure 1A). Diazo compounds have been widely explored as a source of carbenoids under transition metal catalysis (Xia et al., 2017, Ford et al., 2015, Davies and Manning, 2008, Doyle et al., 1998); in the context of C–C insertions, Wang and co-workers have described the formal insertion of diazo-derived rhodium carbenoids into the cyclic C−C bonds of strained benzocyclobutenols (Xia et al., 2014), whereas Murakami's group reported a related enantioselective insertion using N-tosylhydrazones as carbene precursors (Yada et al., 2014) (Figure 1B). In both reports, strain release provides a crucial thermodynamic driving force (Fumagalli et al., 2017). In sharp contrast, the selective one-carbon insertion of diazo-derived carbenoids into unstrained acyclic C−C σ-bonds is a formidable challenge (Brogan and Zercher, 1996). Very recently, we have also realized a silver-catalyzed formal carbene insertion into acyclic C-C bonds, affording 1,4-dicarbonyl products bearing an all-carbon quaternary center (Liu et al., 2018). However, the process still has certain deficiencies like the need to synthesize and handle potentially toxic and explosive diazo compounds and the fact that the C-C bond cleavage is limited to 1,3-diketones. As part of our continued interest in the silver-catalyzed activation of diazo compounds (Liu et al., 2017a, Liu et al., 2017b, Liu et al., 2018), we here report the silver-catalyzed formal carbene insertion into the unstrained C−C(=O) bonds of 1,3-dicarbonyls (Xi et al., 2014), using N-nosylhydrazones (Xia and Wang, 2017, Xiao et al., 2013, Shao and Zhang, 2012, Barluenga and Valdés, 2011) as diazo surrogates (Figure 1C). This represents the first example of the homologation of acyclic ketones with aryldiazomethanes (Candeias et al., 2016, Xia et al., 2013) and offers a straightforward route to construct synthetically useful polysubstituted 1,4-dicarbonyls, which can be difficult to synthesize by other approaches (DeMartino et al., 2008, Yoo et al., 2010, Liu et al., 2011).

Figure 1

One-Carbon Insertion of Diazo Compounds into C−C σ-Bonds

(A) Lewis acid-promoted nucleophilic addition/1,2-rearrangement.

(B) Rh(I)-catalyzed formal carbene insertion into strained C-C bonds.

(C) This work: Ag(I)-catalyzed formal carbene insertion into unstrained C-C bonds.

One-Carbon Insertion of n class="Chemical">Diazo Compounds into C−C σ-Bonds

(B) Rh(I)-catalyzed formal n class="Chemical">carbene insertion into strained C-C bonds.

Results and Discussion

As shown in Scheme 1, initial efforts to achieve the optimal conditions for this insertion process used the reaction of 4-chlorobenzaldehyde N-nosylhydrazone 1 and n class="Chemical">1,3-diphenylpropane-1,3-dione 2 as the model, AgOTf (10 mol %) and NaH (1.5 equiv) in CH2Cl2 at 40°C (please see Table S1 for details), under which the one-carbon insertion product 3 was obtained in 92% yield. The product structure was unambiguously established by single-crystal X-ray analysis (please see Table S2 for details).

Scheme 1

Optimization of N-Nosylhydrazone 1 Insertion into 1,3-Diketone 2

See also Figures S1 and S2.

Optimization of N-Nosylhydrazone 1 Insertion into n class="Chemical">1,3-Diketone 2

With these conditions in hand, the reaction scope was investigated, first focusing on the N-nosylhydrazone substrate (Figure 2A). Pleasingly, a wide variety of n class="Chemical">aldehyde- and ketone-derived N-nosylhydrazones proved to be suitable substrates. Benzaldehydes substituted with halogens, and a range of other electron-withdrawing (CO2Me and CF3), electron-neutral, and electron-donating groups (Me, OMe, and OBn) at the para, meta, or ortho positions of the phenyl ring were all well-tolerated, affording the desired 1,4-dicarbonyls 4–14 in 58%–86% yield. Notably, a potentially reactive benzylic C–H bond in substrate remained intact (Soldi et al., 2014), giving the desired C−C insertion product 14 in 81% yield. More complex aldehyde-derived N-nosylhydrazones were also compatible, such as disubstituted arenes, naphthyl, 3-thienyl, 3-furyl, and even cinnamyl groups, leading to the corresponding products 15–19 in good yields. To our delight, ketone-derived N-nosylhydrazones also underwent successful C–C insertion to give 1,4-dicarbonyls containing an all-carbon α-quaternary stereocenter (Quasdorf and Overman, 2014, Zeng et al., 2016, Feng et al., 2017), requiring only a slight increase of the reaction temperature to 50°C. The scope of these substrates was again broad, with both electron-rich and electron-poor aryl, naphthyl, and heteroaryl methyl ketone-based hydrazones all undergoing smooth reaction with 2 to give 1,4-diketones (20–27) in 52%–86% yield. N-nosylhydrazones bearing a trifluoromethyl group and a 2-methoxyethyl group were also compatible with the reaction conditions, giving α-functionalized 1,4-dicarbonyls 25 and 26 in 86% and 65% yield, respectively. Even the sterically hindered diphenyl N-nosylhydrazone delivered the desired product 27 in excellent yield (85%). Collectively, these results demonstrate the breadth of N-nosylhydrazones that can be employed in this insertion chemistry.

Figure 2

Substrate Scope Investigation

(A) C-C insertion reaction of N-nosylhydrazones.

(B) C-C insertion reaction of 1,3-dicarbonyls.

(C) Diastereoselective insertion into α-substituted 1,3-dicarbonyls.

Reaction conditions: N-nosylhydrazones (0.3 mmol), NaH (0.45 mmol), and CH2Cl2 (6.0 mL) were stirred at room temperature for 1 hr, then 1,3-dicarbonyls (0.45 mmol) and AgOTf (0.03 mmol) were added, after which the mixture was stirred at 40°C for 18 hr; yields are isolated yields. The reaction was performed at 50°C for compounds 20–27. PCP, p-chlorophenyl for compounds 28–46. See also Figures S3–S111.

Reaction conditions: N-nosylhydrazones (0.3 mmol), n class="Chemical">NaH (0.45 mmol), and CH2Cl2 (6.0 mL) were stirred at room temperature for 1 hr, then 1,3-dicarbonyls (0.45 mmol) and AgOTf (0.03 mmol) were added, after which the mixture was stirred at 40°C for 18 hr; yields are isolated yields. The reaction was performed at 50°C for compounds 20–27. PCP, p-chlorophenyl for compounds 28–46. See also Figures S3–S111.

Next, a variety of 1,3-dicarbonyl compounds, including β-din class="Chemical">ketones, β-ketoesters, and β-ketoamides, were examined in reactions with 4-chlorophenyl N-nosylhydrazone 1 (Figure 2B). Various symmetrical β-diketones with different substituted aryl/alkyl groups were all excellent substrates, affording the corresponding insertion products 28–32 in excellent yields (77%–90%). In the case of unsymmetrical phenyl methyl 1,3-diketone, a 2:1 mixture of products 33 and 33′ was obtained in 90% combined yield. This regioselectivity was dramatically enhanced on turning our attention to β-ketoesters: both electron-rich and electron-poor aryl, 2-naphthyl, and 3-thienyl β-ketoesters all smoothly reacted with N-nosylhydrazone 1 to deliver the corresponding γ-ketoesters (34–42) in 62%–92% yield as single regioisomers. The catalytic protocol could also be extended to β-ketoamides, affording γ-ketoamides (43–46) in moderate to good yields (58–82%), with these one-carbon insertions once again proceeding in a regioselective manner, i.e., into the C(=O)−C bond.

Inspired by the above results, we sought to challenge the scope of the chemistry by using various α-substituted 1,3-diketones (Figure 2C), which have the potential to install two adjacent stereocentres in the product n class="Chemical">1,4-dicarbonyls. In the event, 1,3-diketones featuring α-methyl, n-butyl, and benzyl groups all participated efficiently in the C−C insertion reaction with a variety of N-nosylhydrazones, giving 2,3-disubstituted 1,4-diketones 47–53 in moderate to high yields (44%–78%) and, to our delight, with good to excellent diastereoselectivity (4:1–13:1 dr) (Dittrich et al., 2016). Such 2,3-disubstituted 1,4-diketones are widespread in biologically active natural products (DeMartino et al., 2008, Yoo et al., 2010) but are not easily accessed in a stereoselective manner by other methods (Liu et al., 2011).

Finally, the robustness of the insertion was tested by performing a multigram-scale synthesis (Scheme 2). We were pleased to find that the reaction could readily be carried out on 15 mmol scale (5.10 g of 1), affording 3 in high yield (86%, 5.23 g). The synthetic utility of the product 1,4-diketone 3 was briefly explored through its conversion to a n class="Chemical">2,3,5-trisubstituted pyrrole 54 on treatment with magnesium nitride (94%) (Veitch et al., 2008); to a 1,2,3,5-tetrasubstituted pyrrole (55) on refluxing with aniline in acetic acid (88%); and to a 2,3,5-trisubstituted furan (56) on treatment with TsOH in toluene at 110°C (86%) (Liu et al., 2011).

Scheme 2

Multigram-Scale Synthesis of 3 and Further Transformations

Reaction conditions: (a) Mg3N2, MeOH, 90°C, 24 hr; (b) aniline (1.5 equiv), AcOH, reflux, 18 hr; (c) TsOH (50 mol %), toluene, 110°C, 8 hr.

See also Figures S112–S117.

Reaction conditions: (a) Mg3N2, n class="Chemical">MeOH, 90°C, 24 hr; (b) aniline (1.5 equiv), AcOH, reflux, 18 hr; (c) TsOH (50 mol %), toluene, 110°C, 8 hr.

Insight into the possible mechanism of this formal C–C insertion process was obtained through a series of control experiments (Scheme 3, see also Scheme S1). First, attempted reaction of 3,3-dimethylpentane-2,4-dione (Scheme 3, Equation 1) met with n class="Disease">failure, suggesting the ability of the dicarbonyl to form an enol or enolate to be important. Cyclohexane-1,3-dione also proved unsuccessful (Scheme 3, Equation 2); this substrate can clearly undergo enolization but cannot form an enolate capable of chelating to a metal ion through both oxygen atoms (Curini et al., 2006). Under the standard silver catalysis, the reaction of N-nosylhydrazone 1 and silylenol ether 59, which has no an electron-withdrawing group, resulted in cyclopropane 60, without ring-opening (Scheme 3, Equation 3). In contrast, reaction of methyl phenyldiazoacetate with 59 afforded C-C coupling product 61, which can be explained by in situ formation and ring-opening of a donor-acceptor cyclopropane intermediate (Scheme 3, Equation 4). The intermediacy of a silver enolate was then probed through the reactions of silver acetylacetonate and sodium acetylacetonate with 1 under the standard conditions. Only the former was successful, with product 32 isolated in 40% yield (Scheme S1). This may imply that the silver ion plays a dual role not only in the formation of a silver carbenoid from a diazo compound generated in situ from the N-nosylhydrazone but also in the delivery of this carbenoid to the dicarbonyl through formation of a bidentate-complexed silver enolate.

Scheme 3

Mechanistic Studies

See also Figures S118–S123.

On the basis of these observations and related precedents (Brogan and Zercher, 1996, Liu et al., 2018), a plausible mechanism for this formal C−C insertion process is proposed in Scheme 4. Initially, NaH promotes decomposition of the n class="Chemical">N-nosylhydrazone 1 to generate an unstable donor-type diazo species I, which then reacts with the silver enolate II formed from reaction of AgOTf with 1,3-dicarbonyls to give a key intermediate silver carbenoid III (Thompson and Davies, 2007, Caballero et al., 2011, Luo et al., 2015). Intramolecular cyclopropanation of the enolate alkene by a carbene transfer-insertion affords cyclopropane IV, which undergoes a ring-opening retro-aldol process to generate intermediate V (Cavitt et al., 2014). Protonation of V produces the 1,4-dicarbonyl product P and regenerates the silver(I) catalyst.

Scheme 4

Proposed Mechanism

Conclusion

In summary, a silver-catalyzed formal n class="Chemical">carbene insertion into the unstrained C−C σ-bonds of 1,3-dicarbonyls has been developed using N-nosylhydrazones as diazo surrogates. In this process, two new C−C bonds are formed to the carbenic carbon atom, along with the regioselective cleavage of a C−C σ-bond. This protocol enables the assembly of synthetically important 1,4-dicarbonyls possessing tertiary/quaternary stereocenters in high yields and with excellent regio- and stereoselectivities. The dual role of the silver catalyst—as a Lewis acid in the formation of a silver enolate and as a transition metal in forming a silver carbenoid—is crucial. Given the mild reaction conditions, broad substrate scope, excellent functional group tolerance, and ready availability of the hydrazone substrates, this one-carbon insertion chemistry has much potential for the construction of useful polysubstituted 1,4-dicarbonyls.

Methods

All methods can be found in the accompanying Transparent Methods supplemental file.