Literature DB >> 30202441

Rheological properties of corn stover slurries during fermentation by Clostridium thermocellum.

Sanchari Ghosh1, Evert K Holwerda1, Robert S Worthen1, Lee R Lynd1, Brenden P Epps1.   

Abstract

BACKGROUND: Milling during fermentation, termed cotreatment, has recently been proposed as an alternative to thermochemical pretreatment as a means to increase the accessibility of lignocellulosic biomass to biological attack. A central premise of this approach is that partial solubilization of biomass changes the slurry's physical properties such that milling becomes more impactful and more feasible. A key uncertainty is the energy required to mill partially fermented biomass. To inform both of these issues, we report rheological characterization of small-particle, corn stover slurries undergoing fermentation by Clostridium thermocellum.
RESULTS: Fermented and unfermented corn stover slurries were found to be shear-thinning and well described by a power law model with an exponent of 0.10. Plastic viscosity of a slurry, initially at 16 wt.% insoluble solids, decreased as a result of fermentation by a factor of 2000, with the first eightfold reduction occurring in the first 10% of carbohydrate conversion. Large amplitude oscillatory shear experiments revealed only minor changes to the slurry's rheological fingerprint as a result of fermentation, with the notable change being a reduction in the critical strain amplitude needed for the onset of nonlinearity. All slurries were found to be elastoviscoplastic, with the elastic/viscous crossover at roughly 100% strain amplitude.
CONCLUSIONS: Whereas prior biomass rheology studies have involved pretreated feedstocks and solubilization mediated by fungal cellulase, we report results for feedstocks with no pretreatment other than autoclaving and for solubilization mediated by C. thermocellum. As observed in prior studies, C. thermocellum fermentation results in a dramatic decrease in viscosity. The magnitude of this decrease, however, is much larger starting with unpretreated feedstock than previously reported for pretreated feedstocks. LAOS measurements provide a detailed picture of the rheological fingerprint of the material. Viscosity measurements confirm the hypothesis that the physical character of corn stover slurries changes dramatically during fermentation by C. thermocellum, and indicate that the energy expended on overcoming slurry viscosity will be far less for partially fermented corn stover than for unfermented corn stover.

Entities:  

Keywords:  Bioenergy; Biomass; Clostridium thermocellum; Consolidated bioprocessing; Corn stover; Cotreatment; Large amplitude oscillatory shear; Rheology; Slurry viscosity

Year:  2018        PMID: 30202441      PMCID: PMC6129011          DOI: 10.1186/s13068-018-1248-z

Source DB:  PubMed          Journal:  Biotechnol Biofuels        ISSN: 1754-6834            Impact factor:   6.040


  20 in total

1.  Biomass recalcitrance: engineering plants and enzymes for biofuels production.

Authors:  Michael E Himmel; Shi-You Ding; David K Johnson; William S Adney; Mark R Nimlos; John W Brady; Thomas D Foust
Journal:  Science       Date:  2007-02-09       Impact factor: 47.728

2.  Characterization of changes in viscosity and insoluble solids content during enzymatic saccharification of pretreated corn stover slurries.

Authors:  Kyle W Dunaway; Rajesh K Dasari; Nicholas G Bennett; R Eric Berson
Journal:  Bioresour Technol       Date:  2010-01-22       Impact factor: 9.642

3.  Consolidated bioprocessing of cellulose to isobutanol using Clostridium thermocellum.

Authors:  Paul P Lin; Luo Mi; Amy H Morioka; Kouki M Yoshino; Sawako Konishi; Sharon C Xu; Beth A Papanek; Lauren A Riley; Adam M Guss; James C Liao
Journal:  Metab Eng       Date:  2015-07-10       Impact factor: 9.783

4.  Particle morphology characterization and manipulation in biomass slurries and the effect on rheological properties and enzymatic conversion.

Authors:  Clare J Dibble; Tatyana A Shatova; Jennie L Jorgenson; Jonathan J Stickel
Journal:  Biotechnol Prog       Date:  2011-08-02

5.  Development and evaluation of methods to infer biosynthesis and substrate consumption in cultures of cellulolytic microorganisms.

Authors:  Evert K Holwerda; Lucas D Ellis; Lee R Lynd
Journal:  Biotechnol Bioeng       Date:  2013-04-30       Impact factor: 4.530

6.  High ethanol titers from cellulose by using metabolically engineered thermophilic, anaerobic microbes.

Authors:  D Aaron Argyros; Shital A Tripathi; Trisha F Barrett; Stephen R Rogers; Lawrence F Feinberg; Daniel G Olson; Justine M Foden; Bethany B Miller; Lee R Lynd; David A Hogsett; Nicky C Caiazza
Journal:  Appl Environ Microbiol       Date:  2011-09-30       Impact factor: 4.792

7.  Measurement of rheological properties of corn stover suspensions.

Authors:  Natalia V Pimenova; Thomas R Hanley
Journal:  Appl Biochem Biotechnol       Date:  2003       Impact factor: 2.926

8.  Rheology of corn stover slurries at high solids concentrations--effects of saccharification and particle size.

Authors:  Sridhar Viamajala; James D McMillan; Daniel J Schell; Richard T Elander
Journal:  Bioresour Technol       Date:  2008-08-28       Impact factor: 9.642

Review 9.  Promise of combined hydrothermal/chemical and mechanical refining for pretreatment of woody and herbaceous biomass.

Authors:  Sun Min Kim; Bruce S Dien; Vijay Singh
Journal:  Biotechnol Biofuels       Date:  2016-04-30       Impact factor: 6.040

10.  Simultaneous achievement of high ethanol yield and titer in Clostridium thermocellum.

Authors:  Liang Tian; Beth Papanek; Daniel G Olson; Thomas Rydzak; Evert K Holwerda; Tianyong Zheng; Jilai Zhou; Marybeth Maloney; Nannan Jiang; Richard J Giannone; Robert L Hettich; Adam M Guss; Lee R Lynd
Journal:  Biotechnol Biofuels       Date:  2016-06-02       Impact factor: 6.040

View more
  1 in total

1.  High-solids enzymatic hydrolysis of ball-milled corn stover with reduced slurry viscosity and improved sugar yields.

Authors:  Minsheng Lu; Junbao Li; Lujia Han; Weihua Xiao
Journal:  Biotechnol Biofuels       Date:  2020-04-20       Impact factor: 6.040

  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.