PURPOSE: To evaluate the load at fracture and influence of artificial aging of posterior teeth occlusal veneers ("table tops") made of two different ceramics. MATERIALS AND METHODS: A total of 80 table tops were produced from feldspathic ceramic (VM) and zirconia-reinforced lithium silicate ceramic (CD) using computer-aided design/computer-assisted manufacturing (CAD/CAM). Half of the specimens from each ceramic were aged prior to the load test. RESULTS: Mean ± standard deviation (SD) load at fracture was significantly higher for CD (1,571.1 N ± 297.0 N) than for VM (573.6 N ± 86.4 N) (P < .001). After aging, load at fracture increased significantly to 1,819.0 N (± 310.6 N) for CD and to 745.2 N (± 168.3 N) for VM. CONCLUSION: The use of zirconia-reinforced lithium silicate ceramic for molar nonprep table tops should be uncomplicated according to the high load-at-fracture values. Mechanical stability of either ceramic is not compromised by aging.
PURPOSE: To evaluate the load at fracture and influence of artificial aging of posterior teeth occlusal veneers ("table tops") made of two different ceramics. MATERIALS AND METHODS: A total of 80 table tops were produced from feldspathic ceramic (VM) and zirconia-reinforced lithium silicate ceramic (CD) using computer-aided design/computer-assisted manufacturing (CAD/CAM). Half of the specimens from each ceramic were aged prior to the load test. RESULTS: Mean ± standard deviation (SD) load at fracture was significantly higher for CD (1,571.1 N ± 297.0 N) than for VM (573.6 N ± 86.4 N) (P < .001). After aging, load at fracture increased significantly to 1,819.0 N (± 310.6 N) for CD and to 745.2 N (± 168.3 N) for VM. CONCLUSION: The use of zirconia-reinforced lithium silicate ceramic for molar nonprep table tops should be uncomplicated according to the high load-at-fracture values. Mechanical stability of either ceramic is not compromised by aging.
Authors: Fernando Zarone; Maria Irene Di Mauro; Pietro Ausiello; Gennaro Ruggiero; Roberto Sorrentino Journal: BMC Oral Health Date: 2019-07-04 Impact factor: 2.757