Literature DB >> 30179455

Light-Driven Micro/Nanomotor for Promising Biomedical Tools: Principle, Challenge, and Prospect.

Jizhuang Wang1, Ze Xiong1, Jing Zheng1, Xiaojun Zhan1, Jinyao Tang1.   

Abstract

A micro/nanomotor (MNM), as miniaturized machinery, can potentially bridge the application gap between the traditional macroscale motor and the molecular motor to manipulate materials at the cellular scale. The fascinating biomedical potential application for these tiny robots has been long envisioned by science fiction, such as "Fantastic Voyage", where complicated surgery can be performed at single cell precision without any surgical incision. However, to enter the highly conservative biomedical and healthcare industry in practice, the MNM must provide unique advantages over existing technology without introducing additional health risk, which has not been fully materialized. As an emerging approach, light-driven micro/nanomotors (LMNMs) have demonstrated several unique advantages over other MNMs, which will be addressed in this Account. As a control signal, light promises additional degrees of freedom to manipulate MNMs by modulating the light intensity, frequency, polarization, and propagation direction with spatial and temporal precision, which enables excellent controllability and programmability of LMNMs. Additionally, the fruitful knowledge and catalysts from the well-studied photocatalysis can be readily transferred to LMNMs for photoelectrochemical reactions, which provides a rich materials inventory for the development of advanced LMNM systems. A model LMNM in general can be regarded as a miniaturized solar cell combined with electrokinetic propulsion parts, where electric current is provided by the photovoltaic effect and then converted to propulsion thrust through a variety of electrokinetic mechanisms. It can be envisioned that the electric current may be further regulated with the onboard electronic circuit for advanced logic-controlled nanorobots. Finally, because incident photons instead of active chemicals provide the energy for LMNM propulsion, the highly active but toxic chemical fuels can be avoided, which suggested their better biocompatibility. It is essential to emphasize that all of these promises rely on the in-depth understanding of the photoelectrochemical reaction as well as the physics of electrokinetic phenomena, which requires further investigations. As a persistent endeavor, the biomedical application is the most attractive but challenging target for MNMs. Currently, most of the MNMs are demonstrated with in vitro conditions largely deviating from the biological environment, and nontrivial in vivo studies and cytotoxicity experiments are rarely reported. As merits of MNMs, the efficiency, biocompatibility, ion tolerance, and controllability critically determine the future success of MNMs. In this Account, existing and prospective solutions in these aspects are systemically discussed for light-propelled MNMs. We believe that, with a better understanding of the fundamental photoelectrochemical and electrokinetic processes, the development of motor design strategies, and improved fabrication methods, the promised practical biomedical application, such as early disease diagnosis, interventional therapy, targeted therapy, and microsurgery, could be realized in the near future.

Entities:  

Mesh:

Year:  2018        PMID: 30179455     DOI: 10.1021/acs.accounts.8b00254

Source DB:  PubMed          Journal:  Acc Chem Res        ISSN: 0001-4842            Impact factor:   22.384


  8 in total

1.  Bioinspired micro/nanomotor with visible light energy-dependent forward, reverse, reciprocating, and spinning schooling motion.

Authors:  Jintao Tong; Dalei Wang; Ye Liu; Xin Lou; Jiwei Jiang; Bin Dong; Renfeng Dong; Mingcheng Yang
Journal:  Proc Natl Acad Sci U S A       Date:  2021-10-19       Impact factor: 11.205

2.  Light-driven carbon nitride microswimmers with propulsion in biological and ionic media and responsive on-demand drug delivery.

Authors:  Varun Sridhar; Filip Podjaski; Yunus Alapan; Julia Kröger; Lars Grunenberg; Vimal Kishore; Bettina V Lotsch; Metin Sitti
Journal:  Sci Robot       Date:  2022-01-19

3.  Single-Metal Hybrid Micromotor.

Authors:  Dajian Li; Yuhong Zheng; Zhanxiang Zhang; Qi Zhang; Xiaoying Huang; Renfeng Dong; Yuepeng Cai; Lin Wang
Journal:  Front Bioeng Biotechnol       Date:  2022-02-14

Review 4.  Graphitic carbon nitride nanotubes: a new material for emerging applications.

Authors:  Oleksandr Stroyuk; Oleksandra Raievska; Dietrich R T Zahn
Journal:  RSC Adv       Date:  2020-09-15       Impact factor: 4.036

5.  Twin-Engine Janus Supramolecular Nanomotors with Counterbalanced Motion.

Authors:  Jingxin Shao; Shoupeng Cao; Hailong Che; Maria Teresa De Martino; Hanglong Wu; Loai K E A Abdelmohsen; Jan C M van Hest
Journal:  J Am Chem Soc       Date:  2022-06-14       Impact factor: 16.383

Review 6.  3D-printed microrobots from design to translation.

Authors:  Sajjad Rahmani Dabbagh; Misagh Rezapour Sarabi; Mehmet Tugrul Birtek; Siamak Seyfi; Metin Sitti; Savas Tasoglu
Journal:  Nat Commun       Date:  2022-10-05       Impact factor: 17.694

7.  Enhanced ion tolerance of electrokinetic locomotion in polyelectrolyte-coated microswimmer.

Authors:  Xiaojun Zhan; Jizhuang Wang; Ze Xiong; Xuan Zhang; Ying Zhou; Jing Zheng; Jianan Chen; Shien-Ping Feng; Jinyao Tang
Journal:  Nat Commun       Date:  2019-09-02       Impact factor: 14.919

8.  Ionic Species Affect the Self-Propulsion of Urease-Powered Micromotors.

Authors:  Xavier Arqué; Xavier Andrés; Rafael Mestre; Bernard Ciraulo; Jaime Ortega Arroyo; Romain Quidant; Tania Patiño; Samuel Sánchez
Journal:  Research (Wash D C)       Date:  2020-07-27
  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.